was working on stripping the Behr Deck over from my floor boards, originally was using a HF side ...
was working on stripping the Behr Deck over from my floor boards, originally was using a HF side button angle grinder, the dust cover and Diamabrush didnt fit correctly. when I used it without the dust cover, the HF grinder would heat up too much in my hand (side button) and would trip the breaker.
this DeWalt solved all my problems and i was able to get the job done.
by
Recommended
6 found this review helpful
May 1, 2018
Exceptional grinder, I’ve use this model many many times. I have no complaints on this product, h...
Exceptional grinder, I’ve use this model many many times. I have no complaints on this product, however, the selection at not one but two locations of sanding pad attachments is lacking. There’s only one flap disc grade, and only diablo 50 and 80 grit are the finest grade they had. They offer finer grades in orbital or mouse pads but for doing large commercial size projects a mouse isn’t going to cut it. One more reason a customer is apt to buy online as opposed to visiting the local hardware store....shame
by
Verified Purchase
Recommended
8 found this review helpful
Sep 18, 2024
by
Verified Purchase
Sep 11, 2024
Great angle grinder.
by
Verified Purchase
Aug 28, 2024
by
Verified Purchase
Aug 28, 2024
Very well built with easy use. Not bad for the price
by
Verified Purchase
Aug 23, 2024
by
Verified Purchase
Aug 20, 2024
It works well, as expected. I prefer a corded tool since I will not use it every week and will not need to hunt down batteries, chargers, etc. If I did use it everyday, I would have bought the battery-powered one.
No complaints.
by
Verified Purchase
Aug 15, 2024
Home Depot as a retailer needs to remind DEWALT that HD is also a store for PROS not just grandmas . The power cord in the grinder is 5ft long / They saved 40Cents on additional 3ft of cord that every professional contractor needs desperately , I think this is last DEWALT tool I purchased in my life.
by
Response from DewaltProductExpertAug 15, 2024
Hello. Thank you for taking the time to provide your feedback. I'm sorry you weren't pleased with the DWE402W. Your feedback is valuable as we take into consideration every piece of feedback that we come across. I will pass this along to our team for review. It is feedback like yours that allows us to make improvements. Thanks, Mitzy, DEWALT Social Media Team
Verified Purchase
Aug 9, 2024
Cut off tool that can't cut off
This angle grinder does not come with the necessary type 1/41 safety guard for safe use as a cut off tool. The manual does not even identify the correct part number for this accessory. After much web searching, I believe that the correct OEM part number is N311439. It ranges in price from $35 to $50, depending on whether you can find a knock-off. Fortunately, I have not even opened there carton, so I can return it. For me, the primary use of an angle grinder is straight cuts in metal, using a thin blade. The tool should come with a type 1 guard, with the cheaper grinding guard as an optional accessory. Many users don't even bother with the grinding/flap wheel guard, but a flying broken cutting wheel is a real risk.
by
Response from DewaltProductExpertAug 9, 2024
Hello Valued Home Depot Customer Thank you for your feedback regarding the small angle grinder model number DWE402W. I am sorry to hear you are unhappy with this product and would be more than happy to assist you with a resolution. If you would like further assistance, please email support at wecare@sbdinc.com and reference ticket 10893075 ,so all information is easily available for the agent to assist you further. Thanks, Sherri DEWALT
Aug 7, 2024
by
Verified Purchase
Jul 17, 2024
by
Verified Purchase
Jul 15, 2024
Do not buy
Tool worked as expected - once. The self-tightening feature of the nut that holds the blade in place worked so well that the blade could not be removed. Tried the included blade removal tool until it bent. Tried liquid wrench. Tried PB Blaster. Bought and used the Milwaukee grinder blade removal tool until the pins bent. Tried bending the cutting blade to get more leverage. Basically, only buy this tool if your expectation is to use it once and throw it away.
by
Response from DewaltProductExpertJul 19, 2024
Hello JoeG. We appreciate your feedback on the DWE402W. Your satisfaction is our top priority. Please contact support at WECARE@sbdinc.com and include a brief description of the issue you are having along with your contact information so we have all information available to assist you. Lee, DEWALT
2 found this review helpful
Jul 13, 2024
by
Verified Purchase
Jul 10, 2024
Always DeWalt great quality
by
Verified Purchase
Jul 3, 2024
by
Verified Purchase
Jun 13, 2024
by
Verified Purchase
May 30, 2024
by
Verified Purchase
May 29, 2024
Works well my only problem is the guard slipped out of place.
by
Verified Purchase
May 29, 2024
works perfect, love it
by
Verified Purchase
May 22, 2024
by
Verified Purchase
May 22, 2024
by
Verified Purchase
May 22, 2024
I like the tool so far. I purchased it and a diamond blade to grind some concrete. Both performed well and made the project a lot easier than I thought it would be.
by
Verified Purchase
May 8, 2024
by
Verified Purchase
Apr 17, 2024
by
Verified Purchase
Apr 3, 2024
by
Verified Purchase
Apr 3, 2024
Our son loved it
The grinder was a gift
by
Verified Purchase
Apr 3, 2024
I am very happy with this grinder. It has good power and for under $100 you can't beat it. I don't use it often but excellent product
by
Verified Purchase
Mar 20, 2024
Cuts tile the best with less chipping than any other Dewalt model or brands.
by
Verified Purchase
Mar 20, 2024
The angle grinder worked great for my project, both grinding down concrete and flooring. Easy to work with and steady in the hands.