Customer Reviews for DIABLO 10in. x 72-Teeth TrexBlade Circular Saw Blade for Composites and Plastic

Great blade, worth the money, perfect cuts with no markings

It made nice clean smooth cuts, and went through the boards like butter.

Rating provided by a verified purchaser

Blade does not rip composite materials as advertisedTakes 7 passes to rip an 8 foot 2 x 8 on a rigid TS 3650 table saw

Cuts trex like butter

These blades are terrific! The carbide tips last just about forever and those 72 teeth make for a really smooth cut.

Works really good.

Worked better than expected. Ripped 2 12’ sections with no trouble and no melting of the Trex.

Fantastic cuts! Crisp and clean with absolutely no melting or chipping.

Cuts everything nice and clean.

Clean cutting blade, great for composite decking.

Rating provided by a verified purchaser

Worked great.

cuts trex beautifully smooth

I used this to rip my LVP planks and it worked great! This was too easy!!

Still working on deck

The blade worked excellent on the trex decking!!!!

It’s not really good, I’m used for cut some of wood and doesn’t cut no more I’m very sad because it’s $60. It’s not cheap

Cuts through the Trex easily and smoothly!

It failed to live up to its "no melt" claim, I returned it

Great blade… A little pricy

Doing a deck rebuild with Trex and purchased the 7.5 inch one first. Because of the good job it did we went back and purchased this one for use in our miter saw. After years of pinching pennies we learned the valuable lesson that the right tools certainly make the job go much smoother. These blades are a bit pricey but worth every cent of it.

I I used the blade to cut Azek decking. It worked very well.

I had read that a regular blade would get too hot and melt the Trex board, so i got this one. I've made 20+ cuts and it went very well. The saying "like a hot knife through butter" definitely applies. I've NOT been concerned about how clean the cut is and have not inspected the cut material up close.

works fine

Rating provided by a verified purchaser

The fine teeth on this blade resulted perfect cuts in the composit decking.

I am thrifty except when comes to diablo blades. they are worth paying extra for they cut with ease

I purchased it to cut insulated metal wall panels. 24 gauge/26 gauge steel skins, 2-1/2" insulation, 42" wide. We are getting over 100 cross/cuts per blade. And the blades then were not missing carbide teeth; they were just finally getting dull. They preform as well or better than blades specifically designed to cut light metal.

This is a great blade. I bought it for ripping Trex decking and found that it provides superior cuts in hardwoods, melamine board and other materials. Nearly jointer-smooth cuts if you've got your technique down. It is one of my go-to blades for both my portable contractor's saw and my shop cabinet saw. Just remember you can't push the cut - the gullets on this blade have 0 hook angle so they don't clear chips as fast. Makes a very nice clean cut. Also have the 12" version of this on my big sliding compound miter saw if I'm not using my ultra-fine finish blade.