Customer Reviews for J-B Weld 0.47 oz. ClearWeld Syringe Epoxy

Epoxy side was hardened inside the container at the exit point. unable to squeeze it out, so had to cut off the top section completely. so it became a single use item. Never happened to me in the past with loctite or gorilla epoxy sets. Smell is kind of strange, a bit of a skunk smell, not your typical epoxy smell. Needless to say, this is a first and last time buying this brand. Will stick to loctite or gorilla glue in the future.

It didn’t hold together the pieces of plastic. I had a flight and have left the area so I don’t even have an opportunity to return it. Wasted $

Could not use. Dried up.

Worked great for sticking the wood handles to several knives I made. Seems to cure fast but not too fast!

The cartridge did not align with the mixing tip and the single use applicator did not allow for the product to be used It was a waste of money

IN MY OPINION JB WELD SEEMS TO WORK AS WORDED ON THE PACKAGING. READ CAREFULLY, THE CLEAR NOZEL ATTACHMENT IS A ONE AND DONE. THE BLACK CAP ATTACHED TO THE PLUNGER COULD HAVE BEEN DESIGNED TO FIT ON THE END A LITTLE BETTER. NOT SURE HOW LONG UNUSED PORTION WILL KEEP AFTER INITIAL USE.

Compact, and easy to use. I used it in several occasions with always satisfying results. For small or big job it keeps the bonding through the years. Very easy to use mixing tube, and if you won't let it harden inside the container, it will wait for your next project indefinitely.

The included mixing applicator tip was perfect for the project that I needed -a high quality copolymer with an exact, directly applied premixed epoxy along and into a crack in a shower base. There should be a note that the included black re-sealing cap for the end of the tube has to be removed from the sprue before application, as it jammed the plunger. At first, I thought the resin had started to cure and had blocked the flow. It took considerable force to continue, and once it broke off, good flow was returned. And, I have used many epoxy syringes previously. Great product, will definitely use it again!

Love mixing nozzle and tube sealer. Hope it works.

This product works well with masonry and concrete applications. I recommend J-B epoxy for small jobs.

Did not work to glue felts on plastic

This is holding up on the aluminum door hinges I fixed. The door is working better than it has for years.

I love the self mixing feature. It’s perfect for getting mixed epoxy into anchor holes. No mess!

I tried using something different to glue down the bezel and case lid of my gaming laptop as it had quite a big crack. I thought the epoxy would work better. It didn't. I followed all of the instructions and waited roughly 30 minutes for the application to cure, but nothing. The epoxy was messy and wet. I bought gorilla glue instead and works way better and is now fixed. Don't bother spending your money on this fake labeling.

Didn’t cure properly. Several days later it’s still sticky even with the mixing tube.

Had a tough time opening this product. Watched MANY videos, which showed it could be easily opened . No it could not. The epoxy was great, but it leaked everywhere. I'm still cleaning up. Would not buy again.

Product does not work. Does not fully cure and remains tacky. Product had no holding power and is a complete waste of money and time. Unused portion of product was returned to retailer. DO NOT waste your time or money