Customer Reviews for Liberty 5-1/16 in. (128mm) Center-to-Center Bronze with Copper Highlights Bar Drawer Pull

The bar drawers look beautiful on the doors of my new bar.

I like the design. They are durable and stainless steel unlike other low quality handles I saw when shopping.These should last a long time.

Perfect design and size for my custom made kitchen.

Simple design for a simple look and feel. The finish is nice and the handles are individually packaged with screws. The 1" 8/32 are with each handle so no looking for the screws. The 3" design is for smaller areas where space may be a concern. The shipping container and packaging prevent damage during shipping. It is a nice product that is clean and crisp. The materials are solid and sturdy. Combo head screws are provided.

5-1/16 in. (128 mm) Champagne Bronze Bar Drawer Pull (25-Pack). This is going to look great in the Bar area, where I have more cabinets to refurbish and these Bronze Handles will do the trick, they feel heavy and sturdy and well balance enough and from the looks of these heavy handles it would look great on any cabinet or draw I decide to install them on to.

This is a well-built pull that has a great and consistent finish to it. It is not as heavy as some of the handles I have used, but, it is heavy for its design and size. I was concerned with how small the base of the handle is where it mounts to the wood but this poses no issue and the handle sits firmly on the drawer face with little to no play in it. I am very satisfied with the quality and craftsmanship. There is not one handle in this box that has any blemish on it at all. Simply excellent build quality.

These look great! We are in the process of updating the kitchen cabinets and will be using these on the finished product. They are solid metal, not cheap plastic or hollow thin metal. The finish is nice, and color is consistent throughout the batch. I like the design (my wife not so much, but says the will look good when the project is complete). They come with the screws to attach them to the cabinets/drawers, and each one is individually packaged so they don't get scratched in the box.

Quality honey tone cabinet pulls. Love the tone of these modern drawer pulls. They are not too gold and at the same time not to brassy. Very good weight to the metal on these pulls. We used these on our dresser to elevate the style. Like I said earlier very impressed with the quality. We found the 25 count to be a nice amount. Our dressers had 20 pulls. So we went ahead and put the same pulls on our nightstands with the extra and we love the matchy look. Also comes with two screw lengths to help pit where ever you might put them.

These are great quality drawer pull handles. Very nice detailing from every angle such as the ends of the handle are very nicely beveled. The Bronze finish is unique, and can complement different cabinet styles. Subtle but stylish very uniform and a very pleasing color. Very easy to maintain you really can't see any smudges or fingerprints.These should last for years.

This cabinet handle has a nice solid feel. I finally got around to replacing the cheap white plastic handles that came with our laundry room cabinets. I under estimated the number of cabinets in our laundry room, missed a two handle draw pull, ordered two more handles online today from Homedepot.com. Nice laundry room face lift with very little expense or effort.

This cabinet handle has a nice solid feel in your hand. I finally got around to replacing the cheap white plastic handles that came with laundry room cabinets. I under estimated the number of cabinets in our laundry room, I ordered ten handles. Missed a two handle draw pull, ordered two more online today from Homedepot.com. Nice laundry room face lift with very little effort.

The 128 MM, 5-1/16 in. brushed steel bar drawer pull is solid and heavy. We had planned to use these on a past project but I was concerned that the uneven measurement (5-1/16 in.) between the screws would make these difficult to install. For the kitchen renovation we just completed, I found out that if you buy Liberty plastic templates for the doors and drawers, these are easy to install and they look great. They go perfectly with stainless steel appliances and the larger dimensions of these pulls make a contemporary statement.

I am contractor. This is my go to handle. Works nice looking and comes with both sets of screws for shallow and deep install.

I purchased these handles for our newly renovated kitchen as I was looking for something contemporary and that would look good for years to come. I compared both this size, and the larger size and this one was the perfect size for both our cabinets as well as the drawers on our peninsula. Other similar ones I'd looked at were much lighter in weight and just didn't seem to have as much "substance" as these did. They look great and we've already had lots of compliments. I'm very pleased with this purchase.

These pulls are solid, heavy and well made. I have navy blue painted lower cabinets and I needed pulls that would look good with that color and also go well with the white upper cabinets. These are a beautiful muted color which is not that bright brass from decades ago. These are on trend with the new design colors and look modern and updated! The pull is about 6" in total length and the screw holes (center to center) are 3-3/4" (see pics). I think this champagne bronze color would coordinate well with almost any color cabinet you have. I love the heavier weight and how well-made these are!

The Liberty drawer pulls are such a nice upgrade for my cabinets. The original pulls were plastic, the champagne bronze metal ones much nicer. They are a tubular shape with screw holes three and three quarters inches apart. It is a modern look for any cabinet or drawer. They are very easy to install. With a screwdriver, I use power one, unscrew old pulls and screw in new ones. There are two sets of screws included, two 1 in. and two 1-5/8 in. screws. I have noticed that when the hole is just through a cabinet the one inch is long enough, but when it is through a drawer with cabinet panel over it, the longer screw is needed.

This door pull made by Liberty (P13457C-CZ-C) has a nice sleek feel, modern look and good solid weight to it. I've used Liberty hardware for over 20 years and found that they hold up very well even with a young family. Reaching your fingers in to grab the pull will not cause them to bind or get stuck behind it as my old pulls did. There is plenty of room for fingers with 15/16" of space under the pull, which will help keep fingernails from digging into the wood behind it. I also like that they include 2 different lengths of screws, one for most doors and a longer set for false front doors and drawers. See pics for lengths. The matte finish will be easier to keep looking nice over the bright polished brass we originally had. The pulls are zinc die cast construction, no cheap pot metal here! There are no instructions, but Home Depot has instructions on the product page and a few video's that are very helpful, including one showing a tool called the AlignRight templates that are used to position the pulls precisely, one tool for cabinet doors another for drawers (available at HD). These pulls really require that kind of tool as there is no margin for error with this type of sleek pull. A few things to consider if you will be updating your pulls rather than installing them on new cabinets. The holes will not line up to older standard door pulls (see pic below) so, you'll need to either fill in the old hole(s) or cover them with a plate or other material like wood or metal. Center-to-center measures 96mm between screws or 3 3/4". As seen in the pics below, if you use one of the existing holes in the door (bottom hole in my case) the pull handle will actually be a little higher than the original one. If you will be using them horizontally on a drawer, two new holes will need to be drilled to keep the pull centered & both old holes covered or filled. I hope this review helps you, if so please click on the thumbs up! Thanks!

These Liberty Bauhaus Bar Pulls in Champagne Bronze are made of stainless steel and are quite heavy. They feel solid and look very high end. Their brushed finish reflects light in a way that makes them look very dramatic. They are perfect for drawer pulls. I was impressed when I very impressed by their weight. Each pull is 7 3/8 inches wide and there is a 5 1/16" inch gap between screw holes. The included hardware is two sets of 8-32 screws, 1" and 1 5/8". There are 25 pulls in this set. We are excited to have these new pulls on our dresser drawers.

I love this Bronze handle! The color is more muted and looks more luxurious than a gold or brass colored handle. I'm replacing the small knobs on my black kitchen cabinet drawers with these 7-1/4" pulls to update the look. The bronze also looks better with my new floors and existing rug (see pics). I will obviously have to fill the holes from my existing knobs but that's not a problem since I saved the remaining cabinet paint when I painted them last year. The handle screw holes are 5" apart center hole to center hole. These pulls are heavy and well made. I can't wait to get them installed on all of my cabinets! I can definitely recommend these cabinet pulls.

Got these drawer/door pulls to update the cabinets in my shop. I really wanted something heavy-duty that could work on both cabinet doors and a variety of drawer sizes, yet would be attractive as well. This product does all that. The pulls are very well made, solid construction, with a durable, nice-looking finish. Installation was easy and the included bolts should fit most standard thickness cabinet doors. Be aware that installation as drawer pulls will require longer bolts than those supplied with the product (or, as I did, you can remove the drawer face from the box to install using the standard bolts). I'm very pleased with the end result!

We recently installed these in our remodeled kitchen and they look AWESOME! The quality from Liberty is excellent, they fit our new cabinets perfectly and Home Depot made ordering quick and easy!! Would definitely recommend!

This draw is easy to install and is a great quality! I like that it’s multi purpose. I use it as a pull and a towel holder. I had the previous set for about 24 years. I spray painted them bronze as a do it yourself project.

It was a nice handle... Customer liked them Bushed finishing was good Solid, not hollow, felt good in hands It really measures about 6 in. 3 in. Is screw centerlines

Very easy to install and look great!.... Solid and look better when installed.

Lightweight and matched appliances well.

Very nice cabinet bar. Perfect size.

These handles are good and you get a much better price by buying online in a bulk quantity of 25, however, they are about an inch shorter than the ones in the store with the same item number.

Installation is some what easy for my frist time. The alignment is key here. After installing a few of these I noticed the bars are slightly off after using the Alignright kit. Thats my fault and not the product. The pack comes with two different screw sets that can only take so much manipulation before stripping them out, but I'm happy with look.

Installation is some what easy. The alignment is key here. After installing a few of these I noticed the bars are slightly off even after using the Alignright kit. Thats my fault and not the product. The pack comes with two different screw sets that can only take so much manipulation before stripping them out. Overall very happy with it. I can easliy open my pot & pan drawers with no problem.

Installations is some what easy. The alignment is key here. After installing a few of these I noticed the bars are slightly off even after using the Alignright kit. Thats my fault and not the product. The pack comes with two different screw sets that can only take so much manipulation before stripping them out. The polished look has a beautiful mirror finish and looks great with my other older fixtures.