Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Made with premium quality polyethylene resins, DIG's 0.700 OD drip irrigation poly tubing is designed to meet the demands of any drip irrigation project, above or below ground, from residential gardening to commercial landscape and agricultural installations. The drip tubing, commonly referred to as poly tubing, blank tubing or drip hose, is used as the primary supply line of a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected to deliver water to the plant area. DIG's drip irrigation poly tubing coil has outstanding environmental stress-cracking resistance, high burst strength and UV protection for durability and long life.
Inner Diameter (in.) | .50 |
|---|---|
Outer Diameter (in.) | .50 |
Tubing Length (ft.) | 100 |
Tubing Size | 1/2" |
Color Family | Blacks |
|---|---|
Drip Irrigation Tubing Type | Distribution Tubing |
Irrigation System Component | Tubing |
Pack Size | 1 |
Returnable | 90-Day |
Manufacturer Warranty | 3 Year Warranty |
|---|
HI James, the main difference between Drip Irrigation Tubing and Dripline is that Drip Irrigation Tubing has NO pre-installed emitter holes and acts a supply line. The Drip Irrigation Tubing can also be used to create your own dripline by installing drip emitters as needed in areas where the plants are irregularly spaced. If you consider standard tubing to be a tube with no pre-installed holes (like a supply line), then standard tubing and drip tubing are identical. If you have any other questions or would like to discuss further, please contact our technical/product support team at our toll-free number: 1-800-344-1172 and we can help guide you in the right direction.
Hi Rickster, our 1/2in tubing is manufactured with polyethylene only. Squirrels and rodents can be tricky to defend against, as they are typically trying to get to the water inside the pipe (not the pipe itself). One suggestion would be to protect the tubing in some fashion, in some cases chicken wire or wire mesh may help protect your tubing.
Hi Patricia, no you do not need to use clamps on the fittings, but you can add hose clamps as they would not damage or hurt the tubing or fittings in any way. You would need a 3/4in or 1in hose clamp if you chose to use them. Yes we offer two ways to terminate the 1/2in runs, you can use Model: Q58 (Compression End Cap) or Model: F68B (Figure 8 Hose End Closure). If you have any other questions or concerns please feel free to contact our technical service team at our toll-free number: (800) 344-1172
Hi rwpdx, please contact your local recycling center for recycling information, our tubing is made from Low Density Polyethylene. They may have a list of recyclable materials available.
Yes, the 1/2in Poly Drip Irrigation tubing (with no holes or emitters) can be buried.
Hi SafetyFirst, keep in mind NSF61 is a standard for drinking water system components such as a water fountain or the water lines in a refrigerator. Irrigation products do not supply a person or people with potable drinking water. If you have further questions or concerns, please contact our technical support team and one of our technicians can assist over the phone. Toll-free number: (800) 344-1172. Happy planting!
Hi Chad, that's a great question and the maximum run length for a single run is about 400 linear feet. So, just be sure to keep your run length under 400 feet and you're good to go! If you would like further explanation or clarification, please contact our technical support team. Toll-free number: (800) 344-1172.
Hello Alan, there are no drippers on this product. This product is designed to attach to drip tubing and/or allow you to puncture the tube with a hole punch to install your own drip emitters along the line. If you prefer pre-installed drip emitters every 12inches, take a look at Model: B12100. If you have any questions or concerns or need clarification on anything, please reach out to our technical support team at our toll-free number: (800) 344-1172
Viewing 1-8 of 88
4.4 out of 5