Product Images
Titen HD 5/8 in. x 8 in. Zinc-Plated Heavy-Duty Screw Anchor
- High-strength anchor for concrete and masonry surfaces
- Zinc-plated steel resists rust in indoor or dry installs
- Fast install with no hole cleaning or special tools needed
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
About This Product
The Titen HD anchor is a high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete. The high-strength, easy-to-install Titen HD anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self-undercutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.
Highlights
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
- Carbon steel Titen HD utilizes a specialized heat-treating process that creates tip hardness for better cutting without compromising the ductility
- Zinc-plated carbon steel anchor can be used for temporary exterior applications
- Size: 5/8 in. x 8 in.
- Caution: Use a Titen HD screw anchor one time only - installing the anchor multiple times may result in excessive thread wear and reduce load capacity
- Code compliance verified by ICC-ES Evaluation Report(s): ESR-2713 (Concrete), ESR-1056 (Masonry), ESR-2713 (Concrete) - Spanish, ESR-5915; State of Florida product approval(s): FL15730
- Shop all Simpson Strong-Tie products
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Specifications
Dimensions
Anchor Diameter (in.) | 5/8" |
|---|---|
Anchor Length (in.) | 8 |
Details
Drive Style | Hex |
|---|---|
Fastener Color | No Color |
Fastener Material | Carbon Steel |
Fastener Plating | Clear Zinc |
Fastener Type | Concrete Screws |
Fastening Base Material | Brick, Cinder Block, Concrete |
Features | No Additional Features |
Interior/Exterior | Interior |
Maximum Weight Capacity (lb.) | 0 |
Measurement System | Inches |
Package Quantity | 1 |
Returnable | 90-Day |
Warranty / Certifications
Manufacturer Warranty | Limited Warranty |
|---|
Questions & Answers
If I'm using a 1/2" anchor screw and the thickness of my slab is 7 inches thick, can I use a 6.50" long screw or would a 6" screw be better? I'd like the anchoring power of the 6.50" but will not use it if there is high risk of a blowout at the bottom.
Hi Pharanear, this is Bekah from Simpson Strong-Tie. When using our THD50600HF1 your slab should be 1.5x the embed depth. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.
So I’m confirming use a 13/16 Masonary bit to drill for 3/4” screw in anchor? I’m gonna try them for a 2 post car lift.
Hi Adam, this is Lexus from Simpson Strong-Tie. Thank you for your inquiry about our THDT75600H item! The recommended fixture hole size is 7/8 to 15/16 (in.) If you ever need help selecting the right product for your application, please don’t hesitate to reach out to our Simpson Strong-Tie Customer Service Team at 800-999-5099. We’re always here to assist!
can it hold a 115lb heavy bag hangman stand holding a 100lb heavy bag if i bolt it into concrete floor
Hi John, this is Lexus from Simpson Strong-Tie. Thank you for your inquiry about our THD37300HF1 item! We want to ensure your question is addressed thoroughly, so we kindly ask that you contact our Simpson Strong-Tie Customer Service Team at 800-999-5099 for direct support. We look forward to assisting you!
drill bit size for 1/2 in. x 4 in titen HD screw
Hi htsanjose, this is Bekah from Simpson Strong-Tie. When installing a 1/2" THD you will use a 1/2" drill bit. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.
How many threads does the 8” Titen HD anchor bolt have? One picture shows significantly fewer (with a large portion of the bolt without threads) while the other picture shows threads all the way to the bolt head.
Hi Matt, this is Bekah from Simpson Strong-Tie. The THD series has different thread lengths and some do go all the way to the head while longer THD's the thread doesn't go all the way to the head. The THDB62800HF1 has a thread length of 5 1/2" so it will not go all the way to the head. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.
What size hole do you need to make
Hi Swissman77, this is Lexus from Simpson Strong-Tie. Thank you for your inquiry about our THDB62800HF1 item! The recommended fixture hole size (in.) is 3/4 to 13/16. If you have any additional questions, please feel free to contact our Simpson Strong-Tie Customer Service Team at 800-999-5099. We're here to help!
What length should be used for a 6x6 Simpson post bracket? 4 inch long or 6 inch long?
Hi Larry, this is Lexus from Simpson Strong-Tie. Thank you for your inquiry about our THD50400HF1 item! We want to ensure your question is addressed thoroughly, so we kindly ask that you contact our Simpson Strong-Tie Customer Service Team at 800-999-5099 for direct support. We look forward to assisting you!
What is the drill size for 3/8” THD? Is it really 1/2”?
Hi HenryM, this is Lexus from Simpson Strong-Tie. Thank you for your inquiry about our THD37500H item! The Drill Bit size is 3/8 (in.), Wrench size is 9/16 (in.), Recommended Fixture Hole Size is 1/2 to 9/16 (in.) and the Minimum Hole Depth Overdrill is 1/4 (in.) If you have any additional questions, please feel free to contact our Simpson Strong-Tie Customer Service Team at 800-999-5099. We're here to help!
Viewing 1-8 of 64
Customer Reviews
4.7 out of 5
Loading Recommendations
Compare Key Features
Product Snapshot | |||
|---|---|---|---|
Ideal for structural applications in dry, interior, non-corrosive environments or temporary outdoor use. High-strength screw anchor for cracked and uncracked concrete. | Ideal for heavy-duty installations in masonry, offering 20% more holding power and corrosion protection. | Ideal for heavy-duty anchoring in cracked/uncracked concrete and masonry, offering superior strength and corrosion resistance for interior and exterior use. | Ideal for heavy-duty fastening in various materials, with superior corrosion resistance and exceptional pullout strength. |
Load Capacity | |||
0.01 lb | |||
Corrosion Resistance | |||
Diameter | |||
5/8 in. | 3/8 in. | 5/8 in. | 0.25 in. |
Length | |||
8 in. | 5 in. | 6.5 in. | 6 in. |
Head Type | |||
Hex | Hex | Hex | Hex |
Related Products
Titen HD 5/8 in. x 6 in. Zinc-Plated Heavy-Duty Screw Anchor
The Titen HD anchor is a high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete. The high-strength, easy-to-install Titen HD anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self-undercutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.
Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor
The Simpson Strong-Tie Titen HD heavy-duty screw anchor is a mechanically galvanized high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. Its proprietary heat treatment and ASTM B695 Class 65 mechanically galvanized coating make it ideal for both interior and exterior anchoring applications. The Titen HD screw anchor is designed for a wide variety of applications such as sill plates, ledgers, post bases, seating, and other holdown applications. The screw anchor is easy to remove for use in temporary applications such as bracing and formwork, or when a fixture needs to be relocated.
5/8 in. x 6 in. Steel Hex-Washer-Head Indoor/Outdoor Large Diameter Concrete Anchors (2-Piece)
Ideal for projects that require heavy-duty holding power, Tapcon plus screw anchors are the stronger, faster and easier masonry anchoring solution. They install in less than half the time of wedge anchors or sleeve anchors and have 20% more holding power. Tapcon plus anchors are suitable for use in concrete, both indoors and outdoors.
3/8 in. x 5 in. KH-EZ Carbon Steel Hex Head Screw Anchor (2-Piece)
The Hilti collection of Kwik Hus-EZ Concrete and Masonry Screw Anchors are the perfect anchoring solution for various base materials, such as concrete (cracked), concrete (light weight), concrete (light weight over metal deck), concrete (untracked) and masonry (grout-filled CMU). These anchors will get the job done for multiple applications. Among the most common uses are glazing, windows and storefronts; racking and shelving; attaching railings, handrails and ledgers (inside environment); anchoring formwork and tilt-up braces, sill plates, perimeter walls and seismic braces; and seismic braces. If you want a concrete or masonry anchor that is quick and easy to install, fully removable, or seismic approved, then the Hilti Kwik Hus-EZ Concrete and Masonry Screw Anchor is the anchor for you.
