The ApolloPEX Ice Maker Outlet Box includes a 1/2 in. Brass PEX barb ice maker valve and is simple to install. It provides flow control through an anti-stick and smooth operating quarter-turn handle. Ideal for installations of ice makers, refrigerators and filtered water dispensers. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
Valve constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
Designed for use within PEX piping systems
1/4 in. O.D. male compression outlet
Box design allows for left or right stud mounting
Snap in place faceplate allows for up to 3/4 in. drywall
Ideal for installations of ice makers, refrigerators and filtered water dispensers
Valve broke and caused 10k in damages in merely a day (overnight). No reason at all, no freezing, bumping, over straining, it wasn’t even being used or hooked up to a line. Just decided to form a hairline crack and start leaking in my brand new house! They need to start putting lead in back in brass. Thanks Flint MI!
by
Dec 8, 2022
by
Verified Purchase
Oct 5, 2022
by
Verified Purchase
Oct 5, 2022
by
Verified Purchase
Sep 8, 2022
Easy to install, nice controls and constructed of good materials...
Easy to install, nice controls and constructed of good materials
by
Verified Purchase
Aug 15, 2022
by
Verified Purchase
Aug 1, 2022
ice maker outlet
worked great on whole house replumb
by
Verified Purchase
Recommended
Jul 27, 2022
Looks wonderful in my kitchen...
Looks wonderful in my kitchen
by
Verified Purchase
Jul 8, 2022
False Advertising
The box says it fits Pex A type fittings, but it slides right in the pipe without expanding. This will only work with Pex B connections.
by
1 found this review helpful
May 5, 2022
Mounting points were a bit on the flimsy side otherwise...
Mounting points were a bit on the flimsy side otherwise a good piece.
I2K 1/2 in. Brass Compatible Copper Sweat Connection Ice Maker Outlet Box with 1/4 Turn
This Oatey SCS Icemaker Box with 1 in. xThis Oatey SCS Icemaker Box with 1 in. x 1 in. Low-Lead Copper Pipe Thread X Pipe Thread Valve can be installed either left handed or right handed. The valve complies with NSF 61 Section 9 specifications. Does not require a support bracket.View Full Product Description
1/2 in. Crimp PEX Ice Maker Box
The Eastman ice maker outlet box providesThe Eastman ice maker outlet box provides a safe water supply installation for refrigerators, water dispensers, and ice makers. It is built with a one-piece box and flange design. It comes with a pre-installed support bracket, a faceplate cover, and a 1/4-turn ball valve for shut-off during maintenance. This ice maker outlet box has a 1/2 in. crimp PEX inlet connection and a 1/4 in. outer diameter compression outlet. It is designed for recessed residential applications. Intended for service at temperatures between 34° F (1° C) and 180° F (82° C), with an allowable working pressure of 125 psi. Complies with lead-free law. UPC approved.View Full Product Description
1/2 in. Push-to-Connect Brass Ice Maker Outlet Box
The SharkBite Ice Maker Outlet Box featuresThe SharkBite Ice Maker Outlet Box features a 1/2 in. Push-to-Connect connection and can be used with copper, CPVC or PEX lines. SharkBite Push-to-Connect connections decrease the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, deburr, mark the pipe approximately 1 in. (for proper insertion depth), install pipe to proper depth and you're done. The Kit includes the Ice Maker Outlet Box, 1/2 in. SharkBite Push-to-Connect x 1/4 in. O.D. Compression Quarter-Turn Ball Valve, Faceplate Cover, 2 Support Brackets. Perfect for use behind your refrigerator, ice maker or water dispenser to provide a clean installation and allow for easy shut-off to protect your home when away and water line is not in use to guard against accidental leaks.View Full Product Description
1/2 in. Standard PEX Brass Compression Ice Maker Outlet Box
The Oatey Square Ice Maker Box provides quick,The Oatey Square Ice Maker Box provides quick, safe water supply and shut off for refrigerator ice makers and water dispensers. It is designed to be used in commercial or residential applications that require supply valves recessed into the wall. Oatey products have earned the trust of plumbing professionals for over 100 years.View Full Product Description