Style+ 10 in. x 25 in. White Traditional Drawer Kit for 25 in. W Style+ Tower

Particle board w/wood decal on top. Main unit wobbly when fully assembled according to instructions. Top unit connects to bottom unit with a single peg on each side. Wall anchors provide obviously insufficient for weight of typical wardrobe. Corner supports are 1/16" thick cardboard triangles. Drawer hardware not same as main unit and barely enough. Back of drawers are unfinished. If it falls apart when I put in my clothes I will not be too shy to return it!!

Particle board w/wood decal on top. Main unit wobbly when fully assembled according to instructions. Top unit connects to bottom unit with a single peg on each side. Wall anchors provide obviously insufficient for weight of typical wardrobe. Corner supports are 1/16" thick cardboard triangles. Drawer hardware not same as main unit and barely enough. Back of drawers are unfinished. If it falls apart when I put in my clothes I will not be too shy to return it!!

Particle board w/wood decal on top. Main unit wobbly when fully assembled according to instructions. Top unit connects to bottom unit with a single peg on each side. Wall anchors provide obviouslyinsufficient for weight of typical wardrobe. Corner supports are 1/16" thick cardboard triangles. Drawer hardware not same as main unit and barely enough. Back of drawers are unfinished. If it falls apart when I put in my clothes I will not be too shy to return it!!

Particle board w/wood decal on top. Main unit wobbly when fully assembled according to instructions. Top unit connects to bottom unit with a single peg on each side. Wall anchors provide obviously insufficient for weight of typical wardrobe. Corner supports are 1/16" thick cardboard triangles. Drawer hardware not same as main unit and barely enough. Back of drawers are unfinished. If it falls apart when I put in my clothes I will not be too shy to return it!!

Easy to put together... I cut the bars to shorten them which was easy as well.

Worked as advertised perfect for our Remodel walk-in closet easy to work with and put together make sure everything is level and square and drawers will go together without any issues

Bought and customized closet. Know that the tower white is not the same as the drawer white, even though all items were style +.

Put this in two closets at a rental unit. Looks great. Easy to customize and fit in different sized closets. I would guess it took about two hours for two people to install the first one. The second closet went a little faster. I cant speak to using the closet organizer, but the install was fine and the look is great.

We took a 69 inch wide closet and installed two narrow cubby units (one on top of the other) with two rods on one side and one on the other. We put in 5 drawers and reinstalled the high shelf in the closet above the Closetmaid unit. The result is like night and day! Everything went together pretty well except for one drawer handle hole that wasn't quite in the right place, so we drilled it out a bit. The drawers are a little bit sticky but probably some graphite spray would help. Since the rods expand and fit one into the other, there is not a seamless surface, which is noticeable occasionally when moving hangers back and forth. We may buy our own rods for a custom fit. We cut 7 inches off one rod already since the closet wasn't wide enough to accommodate the rod width. We installed hooks to hang purses and made a smaller custom drawer out of cardboard covered in contact paper. We put up LED strip lights with a push button on/off switch on the floor. Overall we are very pleased with the outcome and may redo some of our other closets.

I purchased 2 of these units and some additional products for my dressing room. Easy to assemble. I recommend having someone to help you. I did this by myself. A lot of hiccups with Home Depot online. Everything cost less than $1500.