#1 Home Improvement Retailer

Internet # 207062325

Model # EFSWJ10P

1 HP Plastic Shallow Well Jet Pump

$245.84
Apply Now
Pay $220.84 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Provides optimum performance up to 25 ft. under water
  • Corrosion-resistant thermoplastic housing ensures worry-free use
  • Includes nozzle and venturi for convenient use
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

ECO FLO Products shallow well jet pump provides superior performance and high capacities with more pressure for shallow wells at 25 ft. or less. Our EFSWJ10P 1 HP pump provides a pressure gauge and switch attached. The pressure switch is pre-set and pre-wired for automatic operation.

Highlights

Product Information

Internet # 207062325

Model # EFSWJ10P

Specifications

Dimensions: H 10.24 in, W 11.42 in, D 24.02 in

Dimensions

Product Depth (in.)

24.02 in

Product Height (in.)

10.24 in

Product Width (in.)

11.42 in

Details

Amperage (A)

11.1

Cord Length (ft.)

0

Discharge Flow 0 ft. @ 40 PSI (gallons/hour)

1038

Discharge Flow 0 ft. @ 40 PSI (gallons/min)

17

Discharge Flow 25 ft. @ 40 PSI (gallons/hour)

480

Discharge Flow 25 ft. @ 40 PSI (gallons/min)

8

Features

Thermal Overload Protection

Head Pressure (ft.)

156.85

Housing Material

Thermoplastic

Impeller Material

Thermoplastic

Included

No Additional Items Included

Inlet Connection

Threaded female

Jet Pump Product Type

Shallow Well

Maximum Horsepower (hp)

1

Maximum Pressure (PSI)

68

Maximum Working Temperature (F)

77

Minimum working temperature (F)

35

Number of Impellers

1

Outlet Connection

Threaded female

Pack Size

1

Power Type Required

AC

Product Weight (lb.)

31.02 lb

Pump Switch Type

Switchless

Returnable

90-Day

Vertical Lift (ft.)

156.85

Voltage

115v, 230v

Warranty / Certifications

Certifications and Listings

No Certifications or Listings

Manufacturer Warranty

12 month warranty

Questions & Answers

17Questions
caret
Q:Can I have a foot valve and a check valve in the pump suction line of the eco-flo EFSWJ7?
by|Nov 6, 2023
1 Answer
Answer This Question

A:  It is recommended that you only use the foot valve on this product. If you have any other questions please feel free to reach out to our customer support team at 877-326-3561. Best Regards

by|Nov 6, 2023
    caret
    Q:Does it come with adapters and if so what size adapters do I need to connect to? Thank you!
    by|Nov 30, 2020
    1 Answer
    Answer This Question

    A:  Krissy, Thank you for your interest in the ECO-FLO Shallow Well Jet. This unit does NOT come with adapters or the additional accessories that would be recommended for an appropriate install. The suction intake is 1-1/4" and the discharge is 1". Please contact our experts at 844-883-1872 for further information or help. Thanks.

    by|Dec 1, 2020
      caret
      Q:I have been looking for a shallow well pump (new installation) and was hoping to get your opinion on which would be best for me. I have a 5ft deep water tank that is 16ft x 20ft x5ft deep (11,000 gal of water) and would like to have the pump supply a constant 45-50psi at 12-20 gpm. The pump would be suppling my 30ft 5th wheel along with irrigation for a 1.5 acre property ( the piping would be 260 ft to the bottom of the property, which is flat, with 6 spigots to water different areas on different days) Long running for the land but short bursts for the house. In your opinion do I need a pressure tank? If so what size? I have heard the bigger the better but I don't have a starting size. Do you think a 1HP pump would be adequate? Thank you for your time and I look forward to your reply.
      by|May 18, 2020
      1 Answer
      Answer This Question

      A:  Thanks for your question. Yes, the 1HP pump should work, and yes, you will need a pressure tank and pressure switch that operates in the pressure range you are desiring. The size of the pressure tank is based on how many fixtures you anticipate operating at the same time, number of sprinkler heads, etc. The pressure tank manufacturers have guidelines availabe for sizing based on your fixture count. I hope this helps! Everbilt Customer Service

      by|May 20, 2020
        caret
        Q:Will this pump provide 30 feet of lift. I am not looking for 100% performance water pressure at this depth, but water my small lawn and flowers. Can you recommend any pump that will provide 30' of lift with the one inlet type?
        by|May 7, 2020
        3 Answers
        Answer This Question

        A:  Jmitch, This pump (as well as ALL shallow well jet pumps) have a max lift 25’. If you need to pump water from more than 25' in depth, then you need to use either a submersible well pump or a jet pump with the ejector kit down in the well. More details can be shared at by contacting us at 844-883-1872. Thanks.

        by|Mar 16, 2024
          1 found this answer helpful

          A:  I don’t think our water table is that low but the pump has performed well for me with no sign of strain

          by|Oct 19, 2023

            A:  https://www.ecofloproducts.com/upload/efswj7p_spec_sheet.pdf

            by|Dec 5, 2023
              Showing 1-4 of 17

              Customer Reviews

              3.8 out of 5

              • 3.8 out of 38 reviews
              • 73% recommend this product
              Filter by:
              Showing 1-10 of 38 reviews
              Difficult to get a leakproof seal on the plastic outlet threads and motor works ok so far (1 week...
              Difficult to get a leakproof seal on the plastic outlet threads and motor works ok so far (1 week). Getting 60/50 psi out of pump. Using to boost 30psi city pressure. We will see how long it holds up.
              by
              Response from Everbilt Customer ServiceMar 22, 2019
              Thanks for the review. We are glad you are getting the performance you need from your pump.
              Everbilt Customer Service
              • Verified Purchase
              Didn't work for me, but might be too large a pipe...................................................
              Didn't work for me, but might be too large a pipe................................................ This is an unbiased review that is unaffected by the fact that I received this product for free. As proof of impartiality, just click on my nickname and see the average of the ratings I have given over 200 reviews to date. I have a 25' deep 2" well in my back yard. The motor on the pump is making some noises that suggest the motor bearings are shot. I did not install the well so I can't say anything about the construction. I assume there is a check valve in the well. The present pump does the job ok but is making too much noise. There is no check valve inside of or mounted to the old pump. So I wanted to replace it. I removed the old pump and replaced it with this product. All the fittings were sealed properly. I never did get this pump to prime even though i tried for 2 days. I then gave up. Perhaps this pump is too weak to work with a 2" well. I reinstalled the old pump, primed it and it started pumping right away. I believe the old pump is also 1/2 HP but the markings are hard to read. Out of curiosity, I dismantled the new pump and discovered that a baffle plate inside was not installed as indicated in the manual diagram. I corrected that and tried this pump again, but it was still not possible to get it to prime. Since this pump may work adequately on a smaller well, I am not giving it one star only.
              by
              • Recommended
              1 found this review helpful
              This is a great pump and motor for a shallow well 1. First I dug a hole as deep as I could (16 fe...
              This is a great pump and motor for a shallow well 1. First I dug a hole as deep as I could (16 feet ) uning my 4 inch hand auger 2. assemble and tighten pipes ( make sure you connect brass check valve directly to well point. (i used 2-10 ft galv. and 1-4 ft, plus point. sealed with pipe dope and tightened) 3. put pipes in hole and drive in using either sledge hammer or fence post driver Use driving cap on top pipe so as not to cause damage 4. connect shallow well pump to many things like your underground sprinkler You could even put a holding tank in and hook it up to use for items such as your washing machine, for flushing toilet even dishwasher (would have to be heated though) I would use it for everything except drinking. In some areas you could though. (you have to have it tested or at least filtered,,, A great pump that works well at a good price
              by
              • Recommended
              Beware Faulty pressure switch hose
              Very upset. This company uses a soft rubber hose that attaches to the pressure switch. It blows right off because it can not hold the pressure. I came home to a flooded basement and the pump seized up because it ran too long and overheated That line should be made of hard plastic NOT soft rubber . They didn't have it clamped even , it just slides over the nipple
              by
              Response from Everbilt Customer ServiceOct 11, 2022
              Steve_601960, thank you for your review and we are very sorry to hear that you had issues with your pump. When did you purchase your pump? Has the pump been working or is this a new purchase? The rubber tube on these pump is designed to withstand the pressure that the pump produces. Unfortunately, your experience is not a common issue. Our customer service and engineering team are available to help troubleshoot and see where the issue occurred. You can reach us at 877-326-3561. Regards, Eco-Flo Customer Service
                by
                • Verified Purchase
                What can I say replaced my other 3/4 pump fittings...
                What can I say replaced my other 3/4 pump fittings exactly the same not much replumming work.upset that HD don’t keep it on the shelves anymore at any store in the area had to wait a week for shipping.
                by
                Response from Everbilt Customer ServiceMay 26, 2022
                Thank you for your review. We are so glad that you are satisfied with your pump and it was an easy install. If you have any questions or concerns, please feel free to contact our customer service 877-326-3561. Regards, Eco-Flo Customer Service
                • Verified Purchase
                Leaks at inlet connection. Refitted several times and cannot change...
                Leaks at inlet connection. Refitted several times and cannot change situation. Plastic housing may allow metal threads inside to expand
                by
                Response from Everbilt Customer ServiceMay 14, 2021
                Please note that our experts are always willing to help through situations. Please contact them at 844-883-1872 - Monday thru Friday 8am to 5pm EST. Thanks.
                • Verified Purchase
                Good product good service.
                Although this is a second pump because the first one had a leak at the shaft seal, both pumps worked as specified. In addition when I called the company about the pump defect I received outstanding service and advice on what process to follow. Reordering a replacement pump was clearly the quickest way to replace the faulty unit. I am pleased to say that it arrived within a day of the order being place.
                by
                Response from Everbilt Customer ServiceMay 10, 2021
                Otto,
                Thanks for taking the time to leave your review. We appreciate the time/effort to contact us. Thanks.
                • Verified Purchase
                The shaft seal leaked on the first pump. I replaced with a second pump and it leaked also. I re...
                The shaft seal leaked on the first pump. I replaced with a second pump and it leaked also. I returned the second pump also and went with a different brand.
                by
                Response from Everbilt Customer ServiceApr 14, 2021
                Sorry to read about your situation. Please note that ECO-FLO has professionals willing to help through installation issues as well as troubleshooting the pumps. Please contact them at 877-326-3561. Thanks.
                • Verified Purchase
                Went right in to replace the old one. After a...
                Went right in to replace the old one. After a couple minutes of adjusting pressures I haven't had to mess with it since.
                by
                Response from Everbilt Customer ServiceMar 7, 2021
                Fantastic. Thanks for the feedback and review.
                • Verified Purchase
                Showing 1-10 of 38 reviews

                Compare Similar Items

                current item

                Housing Material

                Thermoplastic

                Thermoplastic

                Thermoplastic

                Cast-Iron

                Impeller Material

                Thermoplastic

                Thermoplastic

                Thermoplastic

                Thermoplastic

                Voltage

                115v, 230v

                115v, 230v

                115v, 230v

                120v, 240v