#1 Home Improvement Retailer

Internet #300096270

Model #800049

Store SKU #770190

1/8 in. Barb x 1/4 in. MIP Brass Adapter Fitting

$5.45
  • Use aboveground for water lines to hoses, tanks and more
  • Recommended for use with plastic, vinyl or rubber tubing
  • Pair with a hose clamp for a more secure fit
Store
0 in stock
Text to Me
caret

Product Details

Make projects easier with this durable barb adapter. Fitting is corrosion-resistant and made from lead-free brass, conforms to NSF 61 and 372 and is registered in Mass. It has several barbs to hold when inserted into tubing.
  • 1-piece per package
  • LFA-85
  • Not for underground use
  • Use with soft tubing like vinyl or rubber
  • Hose clamps recommended for secure hold
  • All brass construction
  • Return Policy
  • California residents

Additional Resources

From the Manufacturer

DIY Projects & Ideas

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

13Questions
caret
Q:Will this work on a pressure washer for detergent siphoning?
by|Jan 1, 2023
0 Answer
Answer This Question
caret
Q:I would like to attach this fitting to PVC pipe. What size drill bit should I use to ensure a tight fit?
by|Dec 7, 2022
1 Answer
Answer This Question

A:  For the Everbilt 3/8 in. Barb x 3/8 in. MIP Brass Adapter Fitting, the diameter of the threads at the beginning of the external threads are .61201 inches and gradually tapers to .62701 inches. The outer diameter of a 5/8” drill bit is .625 inches. The use of thread tape or pipe dope is recommended in this type of application.

by|Dec 9, 2022
    caret
    Q:Can this fitting be used for potable water? It's says is lead free.
    by|Oct 19, 2022
    1 Answer
    Answer This Question

    A:  The Everbilt 1/2 in. Barb x 1/2 in. MIP Brass Adapter Fitting can be used for potable water.

    by|Oct 20, 2022
      caret
      Q:Can this fitting be used with pex?
      by|Mar 21, 2022
      1 Answer
      Answer This Question

      A:  For the Everbilt 1/2 in. Barb x 3/8 in. MIP Brass Adapter Fitting, the barb is designed to fit pipes with an inner diameter of ½”. It does not have the same barbing as pex fittings and may not hold as much pressure as a pex specific barb fitting.

      by|Apr 9, 2022
        1 found this answer helpful
        Showing 1-4 of 13
        caret

        Customer Reviews

        4.7 out of 5
        (201)
        • 4.7
          out of 201 reviews
        • 97%recommend this product
        Filter by:
        Showing 1-10 of 201 reviews
        I needed to connect a Pur water filter from my main line under the sink to their provided hose. ...
        I needed to connect a Pur water filter from my main line under the sink to their provided hose. The filter came with an adapter, but it was set up for 1/2 inch to 1/2 inch with the barb coming out and I needed 1/2 inch to 3/8. I had to piece together my set up and this was one of the pieces I used. I applied teflon tape to the threads for a more sure fit and was able to slide the tube down to the 4th barb. It has been installed for a couple of weeks and there hasn't been a single issue. I don't forsee any either. On a side note, the plumbing specialist at my home depot helped me pick out the pieces I would need and even opened up the packages to check the fit in store. The main thing we were both worried about was the seating of the seals, but he went above and beyond to make sure that everything would fit before I ever left the store.
        by
        • DIY
        • Recommended
        I used this for the argon line for my lincoln 210 MP.it works great.
        I used this for the argon line for my lincoln 210 MP.it works great.
        by
        • Verified Purchase
        • Recommended
        1 found this review helpful
        After having completely replacing my HVAC system, I wanted to future-proof it and be AC ready. He...
        After having completely replacing my HVAC system, I wanted to future-proof it and be AC ready. Here in Seattle, most homes do not have air conditioning as our summers are mild. However, summers are continuing to warm. Therefore, as I was replacing the mechanical components (including the supply plenum, return mixing box, and the furnace, air handler and filters), I installed the brass hose barb fitting and a pass through for a chiller line set. Under my water heater which is besides this area, I have a 3/4" copper pipe that runs outdoors for water heater overflows. I added a tee which I connected to this fitting. That way, if I ever put in a coil, the condensate hose could run a mere 2-3' to this fitting and have the water run out of the house (furnaces and water heaters are often installed in garages here in Seattle as there is usually no basements - thus no drains). I placed a red cap over the end and stainless hose clamp on the fitting until I attach a hose in the future.
        by
        • DIY
        • Verified Purchase
        • Recommended
        Use this for a hefty tether point. This is ideal for anchoring a big rope or steep cable to somet...
        Use this for a hefty tether point. This is ideal for anchoring a big rope or steep cable to something. I use these on my dock and also for attaching cables to posts etc. Essentially anything that can have a ½” hole drilled in them and a few inches thick. It comes with a matching nut, but you will likely alss need to buy a suitable washer if anchoring this through wood. The thread turns a little rough, but it is not a problem at all. The threaded part is 2-¾” long. Overall length is 8 inches. Rated for 300 lbs. Made in China.
        by
        • Recommended
        3 found this review helpful
        This everbilt hose barb fitting was exactly what I was looking for. I'm adding some hose to my ai...
        This everbilt hose barb fitting was exactly what I was looking for. I'm adding some hose to my air system in my garage and this is the exact fitting that I needed. I've used this brand before I have been nothing but satisfied and happy with the quality of Peace. Anyone looking to do some adapter modifications to the airline system I would highly recommend this peace to you.
        by
        • Recommended
        no help at the store but i found it myself...
        no help at the store but i found it myself so all good.
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        Showing 1-10 of 201 reviews

        Frequently Bought Together

        Exclusive
        ++
        Price:
        $545

        Compare Similar Brass Fittings

        current product
        Exclusive1/8 in. Barb x 1/4 in. MIP Brass Adapter Fitting
        Exclusive1/4 in. OD Compression x 1/4 in. MIP Brass Adapter FittingExclusive3/8 in. x 1/4 in. OD Compression Brass Reducing Coupling FittingExclusive3/16 in. Barb x 1/4 in. MIP Brass Adapter Fitting
        BrandEverbiltEverbiltEverbiltEverbilt
        Name1/8 in. Barb x 1/4 in. MIP Brass Adapter Fitting1/4 in. OD Compression x 1/4 in. MIP Brass Adapter Fitting3/8 in. x 1/4 in. OD Compression Brass Reducing Coupling Fitting3/16 in. Barb x 1/4 in. MIP Brass Adapter Fitting
        Price
        $545
        $617
        $627
        $647
        Ratings
        (200)
        (543)
        (136)
        (200)
        Fitting 1 size1/8"1/4"3/8"3/16"
        Fitting or Connector TypeAdapterAdapterAdapterAdapter
        ConnectivityBarbCompressionCompressionBarb
        ApplicationAir,OilAir,OilAir,OilAir,Oil
        FeaturesCorrosion Resistant,Lead Free,ThreadedCorrosion Resistant,Lead Free,ThreadedCorrosion Resistant,Lead Free,ThreadedCorrosion Resistant,Lead Free,Threaded
        Pack Size1111
        View ProductView ProductView ProductView Product