#1 Home Improvement Retailer

Internet # 206280713

Model # DP550C

Store SKU # 1001480255

Store SO SKU #1001471689

$418.00
Apply Now
Pay $368.00 after $50 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Pumps up to 822 GPH of clear water at 40 PSI
  • Heavy-duty cast iron construction
  • Deep well or shallow well applications with water depth to 70 ft.
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

EVERBILT Brand Banner
This is a Convertible Jet pump.
This pump is made of Cast-Iron material.
This pumps dimensions are 9.10 in. Depth x 8.3 in. Height x 20.9 in. Width.
The discharge flow rate of this pump @ 0 ft. is 14 GPM.
This pump has a horsepower of 1 hp.
This pumps voltage is 230v.
This pump has a vertical lift of 152 feet.
The warranty on this pump is 1 Year. View more details by clicking on "Warranty" under info & guides.
Illustration may vary from actual product.

About This Product

The Everbilt 1 HP rugged cast iron convertible jet pump has superior performance at depths to water to 70 ft. or less. Self-priming after pump housing is initially filled. The unit is supplied with a built-in 30/50 psi pressure switch for automatic operation and a pressure gauge. The unit is supplied with both the shallow well and deep well ejectors. The unit comes with the shallow well jet ejector installed on the pump for applications with depths to water 25 ft. and below. The deep well venturi and nozzle is supplied for deep well applications. For deep well applications with water depths over 25 ft. to 70 ft., the venturi and nozzle are placed in the well on the piping. The unit is supplied with a 1-year warranty.

Highlights

  • Rugged cast-iron construction
  • Supplied with the shallow well jet ejector installed and supplied with the deep well components
  • For professional technical support call 1-844-241-5521
  • Heavy-duty dual voltage 115/230-Volt motor, pre-set at 230-Volt
  • Deep well application water level: 70 ft.
  • Shallow well application: depth to water 25 ft. or less
  • Deep well application:depth to water 25 ft. - 70 ft.
  • One-year warranty
  • Call 1-844-241-5521 for Installation Help
  • Shop All Everbilt Jet Pumps Here
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 206280713

Model # DP550C

Store SKU # 1001480255

Store SO SKU #1001471689

Specifications

Dimensions: H 8.3 in, W 20.9 in, D 9.10 in

Dimensions

Product Depth (in.)

9.10 in

Product Height (in.)

8.3 in

Product Width (in.)

20.9 in

Details

Amperage (A)

11.8 A

Cord Length (ft.)

0 ft

Discharge Flow 0 ft. @ 40 PSI (gallons/hour)

822

Discharge Flow 0 ft. @ 40 PSI (gallons/min)

14

Discharge Flow 25 ft. @ 40 PSI (gallons/hour)

492

Discharge Flow 25 ft. @ 40 PSI (gallons/min)

8

Features

No Additional Features

Head Pressure (ft.)

152

Housing Material

Cast-Iron

Impeller Material

Thermoplastic

Included

No Additional Items Included

Inlet Connection

Threaded female

Jet Pump Product Type

Convertible

Maximum Horsepower (hp)

1

Maximum Pressure (PSI)

67

Maximum Working Temperature (F)

95

Minimum working temperature (F)

35

Number of Impellers

1

Outlet Connection

Threaded female

Pack Size

1

Power Type Required

AC

Product Weight (lb.)

35.86 lb

Pump Switch Type

Switchless

Returnable

90-Day

Vertical Lift (ft.)

152

Voltage

115v, 230v

Warranty / Certifications

Certifications and Listings

CSA Certified

Manufacturer Warranty

1 Year

Questions & Answers

90Questions
caret
Q:How to adjust pressure level
by|May 25, 2024
0 Answer
Answer This Question
caret
Q:What is the expected GPM for a shallow well with static water level at 15ft feet using 1 1/4in pipe and a 3ft well point at 25ft? only able to achieve 1.5GPM using the Drummond 1HP pump.
by|May 2, 2024
1 Answer
Answer This Question

A:  DanP- This pump should be able to pull 8 gallons of water per minute. However, it is very concerning that your current 1HP pump is only pulling 1.5GPM. We encourage you to check your foot valve at the bottom of the well. Those need to be changed out every 15 years or so. More than likely you have a leak or it has developed holes in it and the pump struggles to pull up from this shallow depth. Give us a call if you have other questions about this. 844 242-2475 - GP Support

by|May 2, 2024
    caret
    Q:I need to replace the large O ring on the pump housing. My Everbilt jet pump model # is DP370C DP550C. What seal kit would you reccomend? Also were to purchase it. Thank you
    by|Apr 24, 2024
    1 Answer
    Answer This Question

    A:  Daniel - Thank you for reaching out to our Technical Support Team. Please call our support number at 844 242-2475. We just need your model number which is located on the pump data tag sticker. We can assist you with parts you may need. -GP Support

    by|Apr 25, 2024
      caret
      Q:Does this pump have any No Water Protection? or will it just run , even if the water supply is gone?
      by|Mar 31, 2024
      1 Answer
      Answer This Question

      A:  Farmer Shawn - the pump has some overheating protection, but for the most part every care should be taken to ensure the pump doesn't overheat to get to that point. -GP Support

      by|Apr 1, 2024
        Showing 1-4 of 90

        Customer Reviews

        3.8 out of 5

        • 3.8 out of 268 reviews
        • 75% recommend this product
        Filter by:
        Showing 1-10 of 268 reviews
        BUYER BEWARE! The brand new pump fails to start!
        Bought and had this pump installed only to find the "humming" described in the manual as a failure to start was a regular occurrence. I hoped after running a few days it may get better but two weeks in no luck. Daily this pump needs to be addressed to get it to run, by sticking a screwdriver into the motor AS INSTRUCTED TO IN THE MANUAL. If I had read the yellow sticker on the pump instructing you to do so, I would have promptly returned to the store before installing!
        by
        Response from GPPumps TeamJan 16, 2024
        Matthew - I'm sorry to hear you're having trouble with this pump. The instructions do mention about sticking a screwdriver in back of pump to get it started, but keep in mind this would only be a sort of last resort action. In no way do we advertise the pump as needing this to be done everytime. The pump is controlled by a pressure switch which turns the pump on automatically. If you're having trouble with your pump starting, it may be the pump is going bad or the pressure switch may need to be replaced. You can call us at 844 242-2475 to order parts -GP Support
          Great replacement pump for water tank
          I used this pump to replace a previous pump that had started leaking from the housing after it had run dry. My setup is a large water tank and this provides pressure into a pressure tank that then feeds my house. The swap over was simple and the wiring was really easy. I’m using it as a 240v pump and it was easy to set that up. The pump is about an average noise level and I’ve had no issues with leaking or pressure levels since I’ve installed it. The pump was easy to convert.
          by
          • Recommended
          Well built, cast iron 3/4 horse power pump for 8 gallons a minute usages
          This great Everbilt fresh water Convertible Jet pump is ideal for so many uses, including swimming pools, but also hydroponic circulation needs. On a well built cast iron frame well finished, and with a regulator and pressure gauge (which along with electrical wiring is the main assembly outside the installation use). Easy install, quality made, powerful 3/4 horse power, 8 gallons a minute pumping power.
          by
          • Recommended
          Versatile
          I have used this type of pump for years as booster pumps. I have a low flow well so I pump into a holding tank and then use these pumps to boost to the house and they work really good. This one is for both shallow and what they consider deep wells.(Up to 175 foot). The end unbolts from the pump and then you put a device in it for the deep part. The part you unbolted from the pump body then goes into the well with two pipes. This is the jet pump part of the set up. The housing is cast iron, which for me is a plus, making it more durable. The pump came with a pressure gauge as well. It’s not a high budget one, but will do the job at setup. My experience is that this level of gauge isn’t the best long term. It also comes with a second plastic/vinyl tube for the pressure sensor. To be honest, I’m not overly excited about the plastic tube, but that’s the standard today. This pump is selectable for 120vac or 240vac and is changeable by removing a cover and simply sliding a switch. There is directions on the pump housing. It has a standard pressure switch setup, which is easy to adjust. It comes preset with the spec in the instructions. It does come with a good set of instructions. This pump is pretty universal. Durability is yet to be determined, but if it performs like the last one I had like this, it will be many year’s before I’ll need to worry about it. I do water a small lawn and garden every year as well as the household stuff.
          by
          • Recommended
          Everbilt 1 HP Convertible Jet Pump
          The Everbuilt 1 HP Jet Pump is just as described, it is 1HP and has all cast iron construction. It can be used with either 230v or 120v and carries a 1 year warranty. The unit comes with installation instructions but unless you are well versed in plumbing the installation is best left up to a professional. I am using the pump at 120v and for a 25' depth shallow well. Once installed I primed the pump and it started pumping water very quickly at 65psi. I used it every day for almost 3 weeks and it worked perfect. I the did not need to use it for 2 weeks and after it sat when I went to restart it the pump would hum and it would not start! I got the instructions out and under trouble shooting the first problem was "Pump Humming". The corrective action was to use a flat head screwdriver and turn the motor shaft through the center hole in the motor cap. I did the corrective action and it began working again. The issue I have with the pump is if it sits for over 2 weeks I have to turn the motor shaft with a screwdriver for the motor to start -very frustrating. This is the second one of these pumps I have and they both have the same problem. I can recommend this pump if it is used on a daily or weekly basis but if it sits for a couple of weeks make sure you have a screwdriver handy. Everbuilt needs to look into that issue and unfortunately due to that issue I can only give it 2 stars.
          by
          • Recommended
          Works well.
          This is a great pump. Made of heavy duty long lasting cast iron. It is one horse power and can discharge 14 gallons per minute flow rate. It is a convertible jet pump that can work at depths of water to 70 ft. Or less. It also has a built in 30/50 psi pressure switch for automatic operation with a pressure gage. It has a 162 foot vertical lift. It also comes with a 1 year warranty.
          by
          • Recommended
          Good value
          What a very well made pump. This should be a well pump that will last you many many years. Replacing my old well for my sprinkler system and this does the trick. Comes complete with everything you need for shallow or up to 70 foot of draw including a pressure gauge and shut off. This can be ran with either 2:30 or 115 volt. It sets up at 230 but you can switch it over to the lower voltage if you do not have the proper power available. This is a great buy and great value.
          by
          • Recommended
          This Everbilt Jet Pump Is A Well Made Product At A Very Reasonable Price
          I live on what was a ranch with a 10 acre plant nursery but most of the land and the cows are gone due to development. I have several wells and most aren’t used but I needed a small pump in addition to a submersible I already have for my home irrigation system. I decided that the Everbilt one horse power convertible jet pump was a good product for what I was doing. My well is 240 feet deep, but in this case it is an artesian (spring fed) well so depth doesn’t matter. As I expected, the pump is working great with no issues. I did have to make a box to protect the pump from weather. I chose this pump as it had a lot of great features. It is self-priming after initial start-up, it is convertible for shallow or deep applications, very solidly made with a cast iron housing and has a one year warranty. My well system works at 40 to 60 PSI and the pump comes set for 30 to 50 PSI but switching it was a simple adjustment. It basically comes with everything you will need but you will definitely have to buy and install an intake check valve or it won’t be self-priming. I have installed many pumps but the directions are good and easy to follow even if you have never installed one. I recommend this pump as a good buy.
          by
          • Recommended
          Works as it should
          This review is for the Everbilt 1 HP Convertible Jet Pump. We need to replace 2 of our well pumps, which are old and either don’t work or struggle to work. This one is more HP than we actually need, but it’s better to go up than down. If you’ve ever installed well pumps before I’m sure this would be a simple switch out (of brands may differ). We’ve actually never had to replace a well pump before but we are “mechanical” & “electrical” thinkers and found this to be no overly difficult. The old pump was a different brand but I guess they are a like in the most important ways (for installation). We’ve used other Everbilt products and found them to be reliable however, at this point I can’t speak to the durability of this pump. Also, the other pump (the one we replaced) was not in a well house and exposed to the elements so we’ve built a well house for this one. No issues with the set up (I like being able to decide on the voltage) and it works as it should; instructions were sufficient.
          by
          • Recommended
          1 found this review helpful
          Good
          Reviewers total about a 4.0 star rating of this unit. So far, it has worked flawlessly, but it is under an easy load. I'm grateful that home depot carries these in stock. It's great to just run up and buy one in emergency, like I had been. It's super heavy at 42lbs in the box. It think it is expensive, but a necessary item to buy if your in the situation for one!
          by
          • Recommended
          Showing 1-10 of 268 reviews

          Compare Similar Items

          current item

          Voltage

          115v, 230v

          115v, 230v

          120v, 240v

          Housing Material

          Cast-Iron

          Cast-Iron

          Cast-Iron