3/4 in. Copper Pressure All Cup Tee Fitting

A:  Dear Valued Home Depot Customer, to better answer your question, please contact our HD.com customer service department at 1-800-466-3337 call any day between 6 a.m. and 2 a.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question.

A:  Store SKU #1002835579

A:  Fits and Sweats like it should.

A:  Thank you for your inquiry on the Everbilt 1/2 in. Copper Pressure Cup x Cup x Cup Tee Fitting. This fitting is only designed to be used with K, L, or M copper tube. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.

A:  Thank you for your inquiry on the Everbilt 3/4 in. Copper Pressure Cup x Cup x Cup Tee Fitting. We appreciate you for bringing it to our attention that there is a conflicting information and we are working to get it updated. This is tee is 3/4 in on all sides. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.

A:  Hi Tee, i purchased this copper tee and it's 3/4" on all sides. The description maybe was meant to read 3/4 x 3/4 x 3/4 as per photo The other posibility is that a 3" length of the tee end to end which is about right. If you're looking for a 3/4" copper tee this is it. Hope that answers your question

A:  All sides are 3/4".

A:  All 3/4,.confusing because of error.

A:  Thank you for your inquiry on the 1/2 in. Copper Tee (10-Bag). NIBCO fittings are sized nominally, meaning that it is the inside diameter of the tubing that defines its size. If the ID is 3/8 in. you will need to use a 3/8 in fitting. If you need further assistance, you can reach a NIBCO Technical Services Advisor, M-F 8am - 6pm EST, by phone at (888) 446-4226. Thank you!

A:  No. Copper tubing is sized by its inner diameter. 1/2" tubing actually has a 5/8" outer diameter so these copper Tee's actually have a 5/8" inner diameter. You need a 3/8" copper Tee which will have a 1/2" inner diameter.

A:  Should be no problem.