A: Hi Eric, Sorry for the delayed response. Regarding your questions: 1) We recommend to use a gel type "super glue" such as Loc-Tite. 2) You can use Bondo for the nail holes. Please let me know any additional questions/comments. Best regards, Greg Carter - Flex Trim (firstname.lastname@example.org, direct: (336)242-1766)
A: If you are bending the piece against the thin dimension (like base on a curved wall), it will easily bend to that radius. If you are bending against the wider dimension (like arched casing), a straight piece will not bend that much and we would need to pre-bend the piece to the correct radius at our factory. Please feel free to contact me directly (email@example.com) if I can be of any further assistance. Best regards, Greg Carter - Flex Trim
A: There is 1 piece per bundle. A couple of key points: 1) Our product is very dense compared to wood, PVC, etc. (we don't try to compete against those products, ours is going to be much more expensive for straight applications and much cheaper for curved applications). 2) In general, straight pieces of flex will not work for all applications and the key issue is which direction you are wanting to bend the moulding. If you are bending the piece like "base on a curved wall" (like you are wrapping a belt around your waist), a straight piece will work fine. However, if you are bending it in the other direction (like a rainbow), the piece would most likely need to be "pre-bent" by us to the correct radius. Please feel free to contact me directly (800-861-0734 or firstname.lastname@example.org if i can be of any assistance.
A: I would really need for you to send a picture of the rounded corner(s) in order to understand how tight the radius of the corner is (you could send the picture to email@example.com - attn: Greg). If the radius is large(r), a normal straight piece should work. However, if the radius is very tight - i.e. if your application is a "bullnose corner", they would require special "pre-bent" pieces (and i would have to check whether we have a mold for that item). Please feel free to call me to discuss if the above is unclear (Greg Carter - 800-861-0734).
|Brand||Flex Trim||Ekena Millwork||Ekena Millwork||Ekena Millwork|
|Name||HD 1x6 3/4 in. x 5-1/2 in. x 144 in. Polyurethane Flexible Flat Stock S4S Moulding||2-1/2 in. x 1 in. x 96 in. S4S Board, PVC (8-Pack)||3-1/2 in. x 3/4 in. x 96 in. S4S Board, PVC (12-Pack)||3-1/2 in. x 1 in. x 96 in. S4S Board, PVC (8-Pack)|
|Moulding Type||S4S Moulding||S4S Moulding||S4S Moulding||S4S Moulding|
|Application||General Purpose||General Purpose||General Purpose||General Purpose|
|Moulding Features||Flexible,Moisture Resistant,Rot Resistant||Moisture Resistant,Paintable,Rot Resistant,Termite Resistant||Moisture Resistant,Paintable,Rot Resistant,Termite Resistant||Moisture Resistant,Paintable,Rot Resistant,Termite Resistant|
|Product Width (in.)||5.5 in||2.5 in||3.5 in||3.5 in|
|THD SO SKU||1000054305|
|View Product||View Product||View Product||View Product|