$6.67
- Matte black finish makes a bold statement in any room
- This decorative switch cover features a sleek, contemporary look
- Step up the sophistication of your room with this easy upgrade
Product Details
Specifications
Questions & Answers
11Questions
Q:Does this come in a 2 gang toggle/ duplex combination?
by|Jun 21, 2022
0 Answer
Q:What is the difference between standard and midsize? Both have the same measurements.
by|Dec 3, 2020
1 Answer
Q:Looking for 2 gang. One toggle/ One rocker (gcf) Is there such a thing? Is this the Subway Tile m...
by|Oct 31, 2020
1 Answer
Q:I need this in a 3 gang toggle. Is there one?
by|Oct 17, 2020
1 Answer
Showing 1-4 of 11
Jun 28, 2019
These solid Hampton Bay subway tile single switch plates have a flawless matte black finish. The...
These solid Hampton Bay subway tile single switch plates have a flawless matte black finish. They are 3 inch wide by 5 inches high and 3/16 inches thick with matching matte black switch plate mounting screws. They have the look and feel of high end switch hardware and have many high end applications including applications that call for matching cover plates for two, three and four switches or combinations of switches and receptacles. They look sharp and clean up with just a soft damp cloth.
by
Jun 18, 2019
It was easy to install and looks attractive!
It was easy to install and looks attractive!
by
Apr 4, 2019
Great improvement from plastic switch plates. These Subway Tile flat black switch plates look gre...
Great improvement from plastic switch plates.
These Subway Tile flat black switch plates look great. They're made of a nice solid metal and come with two matching screws. Each plate is packaged separately.
Installation tips:
1. These will scratch, so don't use a screwdriver too wide (or it'll scratch the plate when you turn the screwdriver).
2. Use a screwdriver which the blade fits the slot. If it's too loose, you can put gouge marks on the screw.
3. VERY IMPORTANT. Install the top screw first and don't fully tighten. When installing the bottom screw, you may need to move the plate slightly to one side or the other to make sure the screw is going in straight. DO NOT force the screw in. You don't want to cross thread the screw, since it fits flush with the hole in the plate. See photos.
4. Now you can tighten the screws, but don't over do it.
5. I try to align the screw head so the slot is horizontal. To me, it looks better and it'll catch the light, just the right way.
See my pictures below. I think you'll like the look. We do!
by
Mar 29, 2019
WOW! These switch plates are awesome. My wife and I wanted something different than your traditio...
WOW! These switch plates are awesome. My wife and I wanted something different than your traditional plastic white plates for our new house that we are building and these are perfect. They are made of metal and have a very nice scratch resistant finish on them that I believe will hold up to years of use. They are 3 1/8" wide x 4 7/8" tall and come with 2 metal screws to attach to the switch socket. They are very stylish and sit farther away from the wall than most switch covers(about 3/16" of an inch) and that adds more texture to the room. All in all a very nice product and very happy with our new product.
by
Mar 26, 2019
This is a very modern switch plate. It has a very sleek profile and does look like a tile. It is ...
This is a very modern switch plate. It has a very sleek profile and does look like a tile. It is actually metal and is solid construction. It is a flat black but I think someone with a little creativity could make these into personalized artistic statements. The black goes with my rock finish walls very nicely but I am going to paint some bronze for a different area of the house.
by
Feb 7, 2019
The painted finish on the subway switch cover was flawed, as in the picture i submitted, you can ...
The painted finish on the subway switch cover was flawed, as in the picture i submitted, you can see through the painted finish in the area above the screw hole. Poor sprayed finish quality.
I think the cost of this metal cover is going to be much higher than the typical plastic cover. I don’t believe the average consumer is going to pay the higher cost for the flat metal painted cover. Especially after adding up how many someone would need to have them all match in a room, section of a residence or an entire house. Could see this if the cover was decorative or more ornamental.
by
Response from HamptonBaySupportFeb 20, 2019
Slacker4141, Thank you for your thoughts on the Subway Tile Decorative Single Switch Plate, Flat Black. I am so sorry that they have not been able to meet all of your expectations after installation. Please know that our Customer Care Specialists are available to offer any assistance with installation or to address any concerns you may have. They are available Monday – Thursday 8:00 a.m. to 5:00 p.m. EST and Friday 9:00 a.m. to 5:00 p.m. EST and can be reached at 800.542.3789 or by email at customersolutions@libertyhardware.com. Best, Victoria with Customer Care
Feb 5, 2019
Not wild about using a metal cover on a residential electrical outlet or residential electrical s...
Not wild about using a metal cover on a residential electrical outlet or residential electrical switch. The finish on the subway switch cover was flawed, as in picture above the screw hole. You can see through the painted finish in that area of this cover. Poor finish quality.
I think the cost of this cover is going to be much more than the typical plastic cover. I don’t believe the average consumer is going to pay the higher cost for a flat metal painted cover, exspessially after adding up how many someone would need to have them all match in a room, section of a residence or an entire house.
by
Feb 5, 2019
Wonderful quality and goes well with any decor. Good lines and clean look. This decorative wall s...
Wonderful quality and goes well with any decor. Good lines and clean look. This decorative wall switch is made of durable metal and will last in any kind of traffic. I was pleasantly surprised that it was so well made since I had purchased other manufacture switch covers only to be disappointed in the flimsy metal used. I'm using this in my home office and the color compliments my TV which is hung on the wall next to the light switch. Fingerprints are not an issue and it wipes clean with a damp towel. I would definitely recommend this product to replace your old plastic covers.
by
Jan 30, 2019
Nice product! Always ensure to turn off the circuit breaker to the zone you are planning to work ...
Nice product! Always ensure to turn off the circuit breaker to the zone you are planning to work on. Comes with the hardware for easy mounting and installation. The switch plate is made of a light metal with a flat black smooth finish. The manufacturer suggests cleaning with a soft damp rag and to refrain from using detergents or abrasives. The manufacturer lists several available application styles on the back of the packaging. You can text "TILE" to 65624 if you're interested in viewing the extended collection online.
by
Jan 30, 2019
The Decorative wall plates are a simple way to transform the look of any room. With the use of a ...
The Decorative wall plates are a simple way to transform the look of any room. With the use of a screw driver you can replacing those basic, “builder’s grade” wall plates is an easy DIY project that gives immediate, delightful results. And this decorative, midsize wall plate is larger than a standard wall plate which gives better coverage around the outlet or switch. The plate is made of a thin metal. Looks nice. I will have to check and see if Home Depot has a black switch.
by
Frequently Bought Together
Price:
$667
Compare Similar Toggle Light Switch Plates
|  |  | Top Rated | |
| Brand | Hampton Bay | Hampton Bay | Hampton Bay | Hampton Bay |
| Name | Black 1-Gang Toggle Wall Plate (1-Pack) | Ascher 1 Gang Toggle Steel Wall Plate - Aged Bronze | White 1-Gang Toggle Wall Plate (1-Pack) | Tiered 1 Gang Toggle Metal Wall Plate - Satin Nickel |
| Price | $667 | $697 | $747 | $747 |
| Ratings | (102) | (3016) | (102) | (2218) |
| Number of Gangs | 1-Gang | 1-Gang | 1-Gang | 1-Gang |
| Wall Plate Material | Metal | Metal | Metal | Metal |
| Package Quantity | 1 | 1 | 1 | 1 |
| Shape | Rectangular | Rectangular | Rectangular | Rectangular |
| Features | No Additional Features | No Additional Features | No Additional Features | No Additional Features |
| View Product | View Product | View Product | View Product |
