Hessaire shutter exhaust fans are built to industrial application standards with corrosion resistant extruded aluminum frames which will not rust on any mounted surface even when exposed to the harshest elements. Hessaire shutter exhaust fans are ideal for exhausting heat, fumes, and odor in residential, commercial, industrial and agricultural buildings. Hessaire offers shutter mounted exhaust fans from 8 in. to 36 in. to fit any size opening. 1.5 in. W flanges on the shutters make the unit easy to install. Louvers are constructed with light aircraft grade aluminum alloy for minimal air resistance. Prop is constructed with 5052 aluminum alloy engineered to precise geometry for quietness and air-moving efficiency (except for 30 in. and 36 in. - grade G90 galvanized for maximum rust protection). The felt lined edge on louvers provides quiet closing and superior weather seal. 9 ft. corded plug is included for easy connection. Hessaire achieves the best in class efficiency measured in CFM/Watt. Hessaire is a trusted name in air-movement engineering.
Best in class efficiency measured by CFM/Watt (cubic feet/minute/Watt)
5052 light aircraft grade aluminum alloy louvers for least air resistance
Non-rusting extruded aluminum shutter frame
Shutters automatically open and close
Corrosion resistant, baked powder painted guards tested to 500-hour salt spray
Hi-efficiency 100% copper wound motors with permanently-lubricated ball bearings
Totally enclosed, air over motors, IP155 rated
Fully assembled, easy to mount pre-drilled flange patterns
I am screening my back porch and bought this fan to help remove smoke from my pellet grill. It does an excellent job. I like that it is easy to mount and not loud like some fans can be. This fan more than meets my expectations and will purchase again for my chicken coop.
by
Recommended
Dec 22, 2022
Great product. Super sturdy and well built.
Solid construction and well built
by
Verified Purchase
Recommended
Jun 19, 2022
Very good product that is easy to install. I did...
Very good product that is easy to install. I did need to remove the louvers for my particular installation and use an additional bracket but it wasn't anything that was hard to accomplish. The power is good for my garage and with exhaust fans, I always go larger than recommended so I can be fully satisfied.
by
Verified Purchase
Jun 4, 2022
Very powerful heavy duty
I'm using this fan in a 1000 sf unfinished attic with an unvented roof. It can get easily get to 110F in the summer in this storage space. The gable vents really aren't enough so I installed this $255 hessaire fan.
Its heavy duty aluminum louvers and frame with a heavy motor. Moves a lot of air. Maybe more than i need!
by
Recommended
Oct 24, 2020
Easy to install. Happy with it so far. Does make some noise, when in operation, but hey, it’s an ...
Easy to install. Happy with it so far. Does make some noise, when in operation, but hey, it’s an exhaust fan. Well worth it.
by
Verified Purchase
Recommended
Aug 14, 2020
I bought this for my generator shed. It works perfectly. It came with a plug that I plug directly...
I bought this for my generator shed. It works perfectly. It came with a plug that I plug directly into the generator. When the generator goes on the fan turns on automatically. I didn't have to buy a separate plug.
by
Verified Purchase
Recommended
8 found this review helpful
Jul 31, 2020
Bought 4 of these to move air through our stagnet shop. They move alot of air and made a huge dif...
Bought 4 of these to move air through our stagnet shop. They move alot of air and made a huge difference. Noise level is what you would expect from a 36" fan.
by
Verified Purchase
Recommended
3 found this review helpful
Jul 25, 2020
Bought this to use in my basement window while woodworking or running my laser etcher. It's a bit...
Bought this to use in my basement window while woodworking or running my laser etcher. It's a bit pricey for a fan but it's sturdy, the variable speed is great, and pulls a decent amount of air.
by
Recommended
Jul 15, 2020
the product is very easy to install and works well. It has dropped the temperature of my shop by ...
the product is very easy to install and works well. It has dropped the temperature of my shop by at least 30 degrees since I installed it with a thermostat. Its quiet and moves a lot of air.
by
Verified Purchase
Recommended
2 found this review helpful
Jul 14, 2020
Need larger opening if installing from the outside.
I installed this from the outside of a CMU block wall. I had to cut a larger opening than 12.5'x12.5' because the fan cage is wider than 12.5' diameter. More like 13.5'x13.5' opening. Also, the fan speeds do not seem to do anything. All three speeds are about the same. That did not matter to me, the fan is working as I need it to, and I am only using the "high" speed. The only bummer was having to redo the opening, as I had already prepped the opening before the fan arrived based on my deadline and the install specs listed on this web site. The specs should indicate front or back mounting opening size.
The fan is solid construction, and was simple to install.
Note: It is very important to have a secondary free-air vent of the same or larger size to allow this fan to draw the heat from the space. This thing moves the air as desired and is reasonably quiet.
Hessaire shutter exhaust fans are built toHessaire shutter exhaust fans are built to industrial application standards with corrosion resistant extruded aluminum frames which will not rust on any mounted surface even when exposed to the harshest elements. Hessaire shutter exhaust fans are ideal for exhausting heat, fumes, and odor in residential, commercial, industrial and agricultural buildings. Hessaire offers shutter mounted exhaust fans from 8 in. to 36 in. to fit any size opening. 1.5 in. W flanges on the shutters make the unit easy to install. Louvers are constructed with light aircraft grade aluminum alloy for minimal air resistance. Prop is constructed with 5052 aluminum alloy engineered to precise geometry for quietness and air-moving efficiency (except for 30 in. and 36 in.- grade G90 galvanized for maximum rust protection). The felt lined edge on louvers provides quiet closing and superior weather seal. Hessaire achieves the best in class efficiency measured in CFM/Watt. Hessaire is a trusted name in air-movement engineering.View Full Product Description
3340 CFM Shutter Exhaust Fan Wall Mounted
Hessaire shutter exhaust fans are built toHessaire shutter exhaust fans are built to industrial application standards with corrosion resistant extruded aluminum frames which will not rust on any mounted surface even when exposed to the harshest elements. Hessaire shutter exhaust fans are ideal for exhausting heat, fumes, and odor in residential, commercial, industrial and agricultural buildings. Hessaire offers shutter mounted exhaust fans from 8" to 36" to fit any size opening. 1.5" wide flanges on the shutters make the unit easy to install. Louvers are constructed with light aircraft grade aluminum alloy for minimal air resistance. Prop is constructed with 5052 aluminum alloy engineered to precise geometry for quietness and air-moving efficiency (except for 30" and 36" - grade G90 galvanized for maximum rust protection). The felt lined edge on louvers provides quiet closing and superior weather seal. 9ft corded plug is included for easy connection. Hessaire achieves the best in class efficiency measured in CFM/Watt. Hessaire is a trusted name in air-movement engineering.View Full Product Description
36 in. 8860 CFM Shutter Exhaust Fan Wall Mounted
Hessaire shutter exhaust fans are built toHessaire shutter exhaust fans are built to industrial application standards with corrosion resistant extruded aluminum frames which will not rust on any mounted surface even when exposed to the harshest elements. Hessaire shutter exhaust fans are ideal for exhausting heat, fumes, and odor in residential, commercial, industrial and agricultural buildings. Hessaire offers shutter mounted exhaust fans from 8 in. to 36 in. to fit any size opening. 1.5 in. W flanges on the shutters make the unit easy to install. Louvers are constructed with light aircraft grade aluminum alloy for minimal air resistance. Prop is constructed with 5052 aluminum alloy engineered to precise geometry for quietness and air-moving efficiency (except for 30 in. and 36 in.- grade G90 galvanized for maximum rust protection). The felt lined edge on louvers provides quiet closing and superior weather seal. Hessaire achieves the best in class efficiency measured in CFM/Watt. Hessaire is a trusted name in air-movement engineering.View Full Product Description
24 in. 4450 CFM Shutter Exhaust Fan Wall Mounted, Dual Speed
Hessaire shutter exhaust fans are built toHessaire shutter exhaust fans are built to industrial application standards with corrosion resistant extruded aluminum frames which will not rust on any mounted surface even when exposed to the harshest elements. Hessaire shutter exhaust fans are ideal for exhausting heat, fumes, and odor in residential, commercial, industrial and agricultural buildings. Hessaire offers shutter mounted exhaust fans from 8 in. to 36 in. to fit any size opening. 1.5 in. W flanges on the shutters make the unit easy to install. Louvers are constructed with light aircraft grade aluminum alloy for minimal air resistance. Prop is constructed with 5052 aluminum alloy engineered to precise geometry for quietness and air-moving efficiency (except for 30 in. and 36 in. - grade G90 galvanized for maximum rust protection). The felt lined edge on louvers provides quiet closing and superior weather seal. 9 ft. corded plug is included for easy connection. Hessaire achieves the best in class efficiency measured in CFM/Watt. Hessaire is a trusted name in air-movement engineering.View Full Product Description