#1 Home Improvement Retailer

Internet # 303710806

Model # 50176H

Store SKU # 1002913062

KwikWeld 0.1 oz. Epoxy Syringe

  • Easy-to-use syringe with re-sealable no waste cap
  • Quick-setting steel reinforced epoxy
  • Sets in a matter of minutes and cures in 4-6 hours to dark grey
  • View More Details
Store
0 in stock

Product Details

About This Product

J-B Weld KwikWeld Syringe is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 300°F.

Highlights

  • Dark grey drying two-part epoxy cold weld sets in 6 minutes and cures in 4-6 hours
  • Great for household repairs, automotive, plumbing, marine, crafts and more
  • Tensile strength of 3127 PSI for a strong, permanent bond
  • No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
  • Great for crafts and more
  • Dries dark grey
  • Cure time 4-6 hours
  • Set time 6 min.
  • Strength 2424 PSI
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 303710806

Model # 50176H

Store SKU # 1002913062

Additional Resources

Shop All J-B Weld
From the Manufacturer

Specifications

Dimensions: H 8.75 in, W 4.38 in, D .1 in

Dimensions

Product Depth (in.)

.1 in

Product Height (in.)

8.75 in

Product Size (oz.)

.85 oz

Product Width (in.)

4.38 in

Details

Adhesion level

High

Curing time (hours)

4

Dry Color

Grey

Epoxy Accessory Type

Syringe

Features

Moisture Resistant, Solvent Resistant

Formula

2 Part

Glue/Epoxy Type

Concrete Epoxy, Metal Epoxy, Plastic Epoxy

Interior/Exterior

Interior/Exterior

Package Quantity

1

Product Form

Gel

Product Weight (oz.)

.1 oz

Recommended Surfaces

Brick, Ceramic, Metal, Plastic

Set Time (Min.)

6

Usage Location

Automotive, General, Marine Environments, Plumbing

Warranty / Certifications

Manufacturer Warranty

N/A

Questions & Answers

32Questions
caret
Q:Hi, will this be good to use to repair a small crack in the cast iron foot of a small cast iron wood stove ?
by|Jun 17, 2024
1 Answer
Answer This Question

A:  If the crack is not handling too much weight it can work. Its the best choice we have

by|Jun 18, 2024
    caret
    Q:Can it be used to see a crack in a Granite countertop.
    by|May 29, 2024
    1 Answer
    Answer This Question

    A:  Yes, you can. Be sure to clean the counter with acetone.

    by|May 29, 2024
      caret
      Q:Will this bond metal to painted surfaces?
      by|Apr 11, 2024
      1 Answer
      Answer This Question

      A:  Not very well and can pull the paint of the metal. Best to

      by|Apr 12, 2024
        caret
        Q:Can it be used on steam pipe
        by|Mar 19, 2024
        1 Answer
        Answer This Question

        A:  No, it will fail over time. Best to repair with new replacement parts.

        by|Mar 21, 2024
          Showing 1-4 of 32

          Customer Reviews

          4.2 out of 5

          • 4.2 out of 596 reviews
          • 84% recommend this product
          Filter by:
          Showing 1-10 of 596 reviews
          There are so many applications for this version of J-B Weld that it’s my go to when I need consistent results. Like the others it should be used in a well ventilated space. I mix it up on a piece of cardboard and use a toothpick or cut a strip of cardboard and use them as the applicator. This time I used it to glue up door tabs that cracked off. Worked like a charm and I don’t have to be concerned they’ll let go. It’s that good.
          by
          Response from jbweld TeamMar 8, 2024
          Thanks. jbweld
          • Verified Purchase
          Total failure
          6 minutes weld... After 8 minutes of clamping together, and then another 5 minutes of cure time, the "weld" fell apart. Second weld on separate rods failred after 20 minutes of clamp time. First time using JBWeld. It will be the last. I will stick with "regular" brands of epoxy, not this wasted of time.
          by
          Response from jbweld TeamJul 10, 2023
          Sorry for the troubles. Depending on the thickness of the epoxy, it sounds like it needed more time to cure. Email us at www.jbweld.com so we can send you anther kit to work with. jbweld
            Very Good, used on a wear hole on my mower...
            Very Good, used on a wear hole on my mower deck approx. 2" x 4" better than bondo
            by
            • Verified Purchase
            Best glue ever! Next time I would get the old fashioned tubes. Easier to control the portions.
            Best glue ever! Next time I would get the old fashioned tubes. Easier to control the portions.
            by
            • Verified Purchase
            • Recommended
            I used it on a wet tile saw arm and is still holding. I used it on the support arm that is no lon...
            I used it on a wet tile saw arm and is still holding. I used it on the support arm that is no longer being made by ryobi. My saw still works great but so needed to save it Jb weld saved me and 3 months down to road and many uses later still holding strong.
            by
            • Verified Purchase
            • Recommended
            I definitely recommend KwikWeld. This product works. I used it on my storm door. The bottom of th...
            I definitely recommend KwikWeld. This product works. I used it on my storm door. The bottom of the metal frame was detaching from the glass.
            by
            • Verified Purchase
            • Recommended
            Patched a hole in my tractor transmission case with ease. JB Weld saved me a lot of work and money.
            Patched a hole in my tractor transmission case with ease. JB Weld saved me a lot of work and money.
            by
            • Verified Purchase
            • Recommended
            the JB weld worked great , fast and strong grip
            the JB weld worked great , fast and strong grip
            by
            • Verified Purchase
            • Recommended
            by
            • Verified Purchase
            Careful With Packaging Selection
            Been using this for years with favorable results. Always purchased the individual tubes but when running low this syringe type must have been the only one spotted on the rack. Big mistake. Finally had a chance to use it. The idea is for the double syringe to distribute equal amounts of each component together. The black formula had no problem but the plastic plunger could not budge the cream color formula. Great idea, poor performance. Always purchase in tubes going forward.
            by
            Response from jbweld TeamMay 31, 2024
            You got a bad syringe. Please contact us at jbweld.com for a good replacement. jbweld
              • Recommended
              Showing 1-10 of 596 reviews