Model # LTP5000D

Internet #205448232

Lotos 50 Amp Non-Touch Pilot Arc Inverter Plasma Cutter for Metal, Dual Voltage 110V/220V, 1/2 inch Clean Cut
0856381005024

Lotos

50 Amp Non-Touch Pilot Arc Inverter Plasma Cutter for Metal, Dual Voltage 110V/220V, 1/2 inch Clean Cut

  • Designed especially for DIY (do-it-yourself) users
  • Fully accommodates the demands of professional operators
  • Smooth, clean cutting
$41001 /carton
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Installation Options

Product Overview

  • Designed especially for DIY (do-it-yourself) users
  • Fully accommodates the demands of professional operators
  • Smooth, clean cutting
As one of the largest manufacturers of plasma cutting, TIG/stick, arc (MMA) welding equipment, Lotos Technology employs the latest high frequency inverter technology, which utilizes MOS-FET to deliver a far more constant, concentrated and precise current to the cutting surface. This technology substantially reduces the size and weight of the plasma cutter and TIG welder. It helps the operator to easily achieve smooth, clean cuts of a wide range of surfaces and materials (e.g. stainless steel, alloy steel, brass, aluminum and other conductive material) with reduced heat and without distortion of metal. Lotos plasma cutters are designed especially for DIY (do-it-yourself) users, while fully accommodating the demands of professional operators.
  • 50 Amp digital inverter air plasma cutter delivers smooth, clean cuts every time
  • Automatic dual voltage/dual frequency (110/220-Volt 50/60Hz)
  • Robust infineon (by Siemens) MOS-FET power drive matrix with pilot arc function integrated
  • PAPST advanced German cooling system
  • Max severance thickness: 3/4 in.
  • Compatible consumables for this machine are Lotos PCON only
  • Compact and portable weighing only 26lbs
  • Cuts rough surfaces and dirty metal
  • Package includes: Plasma cutting torch CP133 (13ft long, 3 pin connection); Ground cable & clamp (6ft long); 4 air hose clips and 2 air hose connectors; Air hose (6ft long); Air filter gauge AR01; Mounting bracket for air filter AR01; Air filter AR01 and user Manual.
  • Click here for more information on Electronic Recycling Programs

Product Overview

  • Designed especially for DIY (do-it-yourself) users
  • Fully accommodates the demands of professional operators
  • Smooth, clean cutting
Model #: LTP5000D
Internet #: 205448232

As one of the largest manufacturers of plasma cutting, TIG/stick, arc (MMA) welding equipment, Lotos Technology employs the latest high frequency inverter technology, which utilizes MOS-FET to deliver a far more constant, concentrated and precise current to the cutting surface. This technology substantially reduces the size and weight of the plasma cutter and TIG welder. It helps the operator to easily achieve smooth, clean cuts of a wide range of surfaces and materials (e.g. stainless steel, alloy steel, brass, aluminum and other conductive material) with reduced heat and without distortion of metal. Lotos plasma cutters are designed especially for DIY (do-it-yourself) users, while fully accommodating the demands of professional operators.

  • 50 Amp digital inverter air plasma cutter delivers smooth, clean cuts every time
  • Automatic dual voltage/dual frequency (110/220-Volt 50/60Hz)
  • Robust infineon (by Siemens) MOS-FET power drive matrix with pilot arc function integrated
  • PAPST advanced German cooling system
  • Max severance thickness: 3/4 in.
  • Compatible consumables for this machine are Lotos PCON only
  • Compact and portable weighing only 26lbs
  • Cuts rough surfaces and dirty metal
  • Package includes: Plasma cutting torch CP133 (13ft long, 3 pin connection); Ground cable & clamp (6ft long); 4 air hose clips and 2 air hose connectors; Air hose (6ft long); Air filter gauge AR01; Mounting bracket for air filter AR01; Air filter AR01 and user Manual.
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Customers Also Compared These

Price
$332.22 /each
$410.01 /carton
$553.00 /each
$603.00 /each
Name 50 Amp Compact Inverter Plasma Cutter for Metal, Dual Voltage 110/220V, 1/2 inch Clean Cut 50 Amp Non-Touch Pilot Arc Inverter Plasma Cutter for Metal, Dual Voltage 110V/220V, 1/2 inch Clean Cut 50 Amp Non-Touch Pilot Arc Plasma Cutter, 200 Amp TIG/Stick Welder 3-in-1 Combo Welding Machine, Dual Voltage 110V/220V 60 Amp Non-Touch Pilot Arc IGBT Inverter Plasma Cutter for Metal, 220V, 3/4 Inch Clean Cut
Brand Lotos Lotos Lotos Lotos
Ratings (48) (107) (42) (5)
Engine Power Electric (AC) Electric (AC) Electric (AC) Electric (AC)
Welder Type Plasma Cutter Plasma Cutter Multi-Process Plasma Cutter
View Product View Product View Product View Product

Specifications

Dimensions

Product Depth (in.)
6
Product Height (in.)
12
Product Width (in.)
15

Details

Engine Power
Electric (AC)
Input Power (Volts)
220
Maximum amperage output (amps)
50
Minimum amperage output (amps)
10
Rated Output (Volts)
100
Returnable
90-Day
Tools Product Type
Power Tool
Torch included
Yes
Welder Type
Plasma Cutter

Warranty / Certifications

Manufacturer Warranty
1 year parts and labor limited warranty.

Specifications

Dimensions

Product Depth (in.)
6
Product Height (in.)
12
Product Width (in.)
15

Details

Engine Power
Electric (AC)
Input Power (Volts)
220
Maximum amperage output (amps)
50
Minimum amperage output (amps)
10
Rated Output (Volts)
100
Returnable
90-Day
Tools Product Type
Power Tool
Torch included
Yes
Welder Type
Plasma Cutter

Warranty / Certifications

Manufacturer Warranty
1 year parts and labor limited warranty.

Questions & Answers

Does this unit stick weld also?

Asked by: Lynn
Ah. I have used this equipment very little, I would to try to stick weld with it... you can stuff do other things, this machine is design to cut and it does that very well, it is not a welder!!!
Answered by: Wally
Date published: 2018-05-17

Does it come out of the box complete ready to use? Or do I need to buy tips etc?

Does it come out of the box complete ready to use? Or do I need to buy tips etc?
Asked by: Jeff
Mine came with 2 tips. You have to hook up the air regulator and set pressure. You will have to get a female plug to fit the plug on the plasma cutter so open the box and get it while you are at the store
Answered by: Ben
Date published: 2018-05-10

My shop is wired for my stick welder(NEMA 6-50 receptacles)(50 amp breaker/#6 awg). I assume I co...

My shop is wired for my stick welder(NEMA 6-50 receptacles)(50 amp breaker/#6 awg). I assume I could replace the existing male plug on the plasma cutter with a NEMA 6-50 male plug to match my welder receptacles?
Asked by: allen
No reason you couldn't. This unit pulls no where near 50A, so it would be overkill on the receptacle. Mine runs just fine on a 20A, have not checked actual draw at full load though.
Answered by: shovelhead98
Date published: 2018-02-06

I see a compressed air inlet and a gas inlet. Is gas required, such as nitrogen, to use the cutter?

I see a compressed air inlet and a gas inlet. Is gas required, such as nitrogen, to use the cutter?
Asked by: allen
Hi, Allen: For plasma cutter, there is no need for gas. An air compress larger than 70 PSI @ 4.0 SCFM will be enough. Thanks for your inquiry Regards Lotos Technology
Answered by: Lotos Technology
Date published: 2018-02-05
  • y_2018, m_5, d_20, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_47
  • loc_, sid_205448232, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 114ms
  • QUESTIONS, PRODUCT

Customer Reviews

50 Amp Non-Touch Pilot Arc Inverter Plasma Cutter for Metal, Dual Voltage 110V/220V, 1/2 inch Clean Cut is rated 4.4 out of 5 by 107.
Rated 5 out of 5 by from Iv had the LTP5000D for a while now and it... Iv had the LTP5000D for a while now and it preforms better than expected. Well worth the money and I highly recommend it. Cuts half inch plate like it’s nothing.
Date published: 2018-03-28
Rated 5 out of 5 by from took it out of the box assembled the parts and @ 35ams it cut a 1/4 inch plate like butter,, AW... took it out of the box assembled the parts and @ 35ams it cut a 1/4 inch plate like butter,, AWESOME...
Date published: 2018-03-27
Rated 4 out of 5 by from I cut some 6" I.D. 1/4" wall pipe using 120vlts.... I cut some 6" I.D. 1/4" wall pipe using 120vlts. It worked with no breaker trips, but I still had to finish the cut with my slitting disc because the slag from using the plasma cutter accumulated on the I.D. of the opposing side, acting like metal spray and "welding it together. I might have been able to break apart with hammer, but chose grinder as the certain fix, When cutting 1/2" plate, I found it worked ok, but it really needs 240 vlts to do this acceptably. I was running on 30 amp circuit, and still repeatedly tripped breaker after a couple inches of cutting. I have yet to try my new cord for 240 vlt. on 1/2", but it worked real sweet on 1/4" plate.
Date published: 2018-01-17
Rated 5 out of 5 by from Pleasantly surprised that such in inexpensive plasma cutter has so far lived up to its billing. I... Pleasantly surprised that such in inexpensive plasma cutter has so far lived up to its billing. I've used it to easily cut through 3/8 mild steel. Very happy about this purchase. I'm a home hobbyist and this is my first plasma cutter. It will serve me for a long time in this capacity. I gave it a five start rating based on it living up to MY needs. If you are a serious fabricator this may not be the machine for you.
Date published: 2018-02-06
Rated 5 out of 5 by from This tool is awesome, me and my son are truly amazed at how easy it cuts through 1/4 inch steel l... This tool is awesome, me and my son are truly amazed at how easy it cuts through 1/4 inch steel like butter. It cut our work time in half. The only thing i did not like was they did not send the inverter cord with it, i would of paid extra for it. We had to wait 5 days to start enjoying this fabulous tool. Best buy I've made in a long time.
Date published: 2018-03-14
Rated 5 out of 5 by from ZERO problems. I haveChanged Power plug and made ground cable... ZERO problems. I haveChanged Power plug and made ground cable longer and heavier gauge. Never used a cutter before so 1st set of consumables lasted me a solid 5-10 seconds before being fussed together. 2nd set is going on 3 weeks of everyday use. Would buy agin. Did get extended warranty.
Date published: 2018-02-06
Rated 4 out of 5 by from Actually works really well cuts what it says to cut... Actually works really well cuts what it says to cut and for the price was expecting it to cut less I tried a small cut on 1/2in to test and cut nice only realistically bought to cut at most 1/4 in max and cuts that great at 220 haven’t tried 110 but it uses the consumables
Date published: 2017-12-08
Rated 5 out of 5 by from I had a piece of 1/2" steel which was a cutting edge from old snow plow and was able to cut that ... I had a piece of 1/2" steel which was a cutting edge from old snow plow and was able to cut that up to make shims for another repair job. highly recommend the Non-touch Pilot arc model when you have to make bevel cuts or using it in tight places.
Date published: 2017-12-27
  • y_2018, m_5, d_20, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_107
  • loc_, sid_205448232, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 84ms
  • REVIEWS, PRODUCT