A: For the 4" "T" fitting the ID would be on Part# 4P01 is 4.24 inches. We hope this helps and please let us know if you should have any further questions.
A: It is 7.87" long and 6.18" tall. You can view the specification under the info & guide section on the product page.
A: No, these are not recommended to be used for running 2 bathroom exhaust fans to an attic.
A: Venting two bathrooms fans into one duct is not advisable. When one fan turns on it depressurizes the house, so some of the exhausted air travels back into the second bathroom.Each bathroom fan should be ducted separately, always.
A: It is not foam. It is a synthetic plastic polymer. It is for, 4 inch pvc pipe. Used typically for waste water plumbing applications.
A: Hillbilly2407, often times in the production of drainage PVC, foam, up to 20% of the total material is used to reduce costs. Solid core PVC carries a psi rating upwards of 220, while foam core PVC is around 5 psi. I am using for a flue vent for condensing tankless water heater.
|Name||PVC S&D Tee, 4 in. Hub X Hub X Hub||PVC S&D Female Cleanout Adapter, 4 in. Hub X FPT||FloLock 1 in. PVC Compression Coupling||4 in. x 4 in. x 2 in. Schedule 40 PVC S x S x S Reducer Tee Fitting|
|Fitting 1 size||4"||4"||1"||4"|
|Fitting or Connector Type||Tee||Coupling||Coupling||Tee|
|Schedule Type||Schedule SDR35||Schedule SDR35||Schedule SDR35||Schedule 40|
|Application||Non-Potable Water||Non-Potable Water||Non-Potable Water||Potable Water|
|Features||Side Inlet||Cleanout||Underground Rated||Underground Use|
|View Product||View Product||View Product||View Product|