Internet #100345781

Model #C48017HD112

Store SKU #189855

Store SO SKU #1000294052

1-1/2 in. PVC DWV Hub x Slip-Joint Trap Adapter

  • For use with drain, waste and vent systems
  • Corrosion and chemical resistant - won't rust, scale or pit
  • Primer is needed before cementing
  • See More Details

Frequently Bought Together

+
+
Price:
$154

Product Overview

The NIBCO 1/2 in. PVC DWV trap adapter is used in residential and commercial drain, waste and vent systems. The PVC DWV trap adapter features a hub x slip joint connection and provides a means for adapting a solvent weld connection to a slip joint connection. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
  • California residents
  • PVC needs primer before cementing
  • Not for use with compressed air or other gases
  • Adapts PVC fitting hub to tubular trap at floor or wall using solvent
  • PVC DWV is easy to install and is joined by solvent cementing or threading
  • UL Listed 94V-0
  • NSF/ANSI standard 14
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar PVC Fittings

current product
1-1/2 in. PVC DWV Hub x Slip-Joint Trap Adapter
1-1/2 in. PVC Schedule. 40 90-Degree S x S Elbow Fitting1-1/2 in. PVC DWV Spigot x Cleanout Adaptor with Plug1-1/2 in. PVC DWV 90 Degree Hub x Hub Long Turn Elbow Fitting
BrandNIBCOCharlotte PipeNIBCONIBCO
Name1-1/2 in. PVC DWV Hub x Slip-Joint Trap Adapter1-1/2 in. PVC Schedule. 40 90-Degree S x S Elbow Fitting1-1/2 in. PVC DWV Spigot x Cleanout Adaptor with Plug1-1/2 in. PVC DWV 90 Degree Hub x Hub Long Turn Elbow Fitting
Price
$154
$186
$198
$298
Ratings
(30)
(200)
(2)
(7)
Fitting 1 size1-1/2"1-1/2"1-1/2"1-1/2"
Fitting or Connector TypeAdapterElbowAdapterElbow
Schedule TypeSchedule DWVSchedule 40Schedule DWVSchedule DWV
ApplicationSewageNon-Potable WaterSewageSewage
ConnectivitySolvent CementedSolvent CementedSolvent CementedSolvent Cemented
Pack Size1111
DWVDWV DWVDWV
FeaturesCorrosion Resistant,Lead FreeUnderground UseLead FreeLead Free
Bend Degree 90 Degree 90 Degree
View ProductView ProductView ProductView Product

Specifications

Dimensions

Double Fitting Size
1-1/2" x 1-1/2"
Fitting 1 size
1-1/2"
Fitting 2 size
1-1/2"
Product Length (in.)
2.09 in

Details

Application
Sewage
Color Family
White
Color/Finish
White PVC
Compatible Pipe Material
PVC
Connection 1
Hub
Connection 2
Slip-Joint
Connectivity
Solvent Cemented
DWV
DWV
Features
Corrosion Resistant,Lead Free
Fitting or Connector Type
Adapter
Fitting/ Connector Collection
PVC
Material
PVC
Maximum working pressure (psi)
5
Maximum Working Temperature (F)
140
Pack Size
1
Pipe or Fitting Product Type
Fittings & Connectors
Product Weight (lb.)
0.112
Reducing Fitting
No
Returnable
180-Day
Schedule Type
Schedule DWV

Warranty / Certifications

Manufacturer Warranty
NIBCO INC. warrants each NIBCO plumbing plastic fitting (including plumbing valves) to be free from defects in materials and workmanship under normal use and service for a period of five (5) years from date of purchase.

Questions & Answers

19Questions20Answers

Does this adapter include a nylon washer?

Asked by Meghan June 15, 2020
1
Answer

Thank you for your inquiry on the NIBCO 1-1/2 in. x 1-1/4 in. PVC DWV Hub x SJ Trap Adapter. This fitting does not include a nylon washer. This fitting is Hub by Slip Joint. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.

Do you need to apply PVC primer/cement to the male end, or does the compression from the nut do t...

Asked by alex June 13, 2020
1
Answer

Thank you for your inquiry on the NIBCO 1-1/2 in. x 1-1/4 in. PVC DWV Hub x SJ Trap Adapter. There is no “male” end on this fitting since it is a solvent cement hub or socket by a slip joint opening with a nut. Assuming you mean the slip joint end when you are saying male end, then no, it is meant to be removable for maintenance as “slip joint” means the mating tubing slips into the waterway of the fitting. No solvent cement should every be applied to a “slip” joint side of a fitting. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.

I need something like this to transition from 2inch pvc to 1 1/2 inch trap.

Asked by RickW April 14, 2020
3
Answers

I ended up using these two: 1. NIBCO 2 in. x 1-1/2 in. PVC DWV Reducing Coupling https://www.homedepot.com/p/NIBCO-2-in-x-1-1-2-in-PVC-DWV-Reducing-Coupling-C4801HD2112/100346360?modalType=drawer 2. NIBCO 1-1/2 in. PVC DWV Trap Adapter https://www.homedepot.com/p/NIBCO-1-1-2-in-PVC-DWV-Trap-Adapter-C480127HD112/100347086?modalType=drawer

Does the threaded side require an oring when installing the trap arm?

Asked by Sean November 21, 2019
1
Answer

Thank you for your inquiry on the NIBCO 1-1/2 in. x 1-1/4 in. PVC DWV Hub x SJ Trap Adapter. The trap adaptor below is Hub x Slip Joint. The Hub end would be solvent glue to the pipe and the slip joint end goes over the pipe and seals using compression from tightening the nut. There is not a rubber O-ring in this assembly. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 6pm EST, by phone at (888) 446-4226.

should teflon be used on the threads?

Asked by ng February 8, 2019
2
Answers

Not required but will not hurt

Will this join 1-1/2 PVC to 1-1/2 copper? The copper OD is1.625

Asked by JT February 3, 2019
3
Answers

Thank you for your inquiry on joining the 1-1/2 in. PVC DWV Hub x SJ Trap Adapter. That will not work with Copper tube since PVC tube and Copper tube have different Out Diameters; this makes the female adapter too large for the OD of the Copper tube. If you need further assistance, you can reach a NIBCO Technical Services Advisor, M-F 8am - 6pm EST, by phone at (888) 446-4226. Thank you!

pvc to chrome plated brass?

Asked by bkh70 August 10, 2018
2
Answers

Yes. For additional information, you may also contact NIBCO Technical Services at CS-Technicalservices@nibco.com or call 888-446-4226 Monday thru Friday 6:00 AM to 7:00 PM.

Do you need a washer on the 1 1/4 inch side of the connection?

Asked by JTB July 13, 2018
2
Answers

No. As you tighten the nut, a built in flange closes around the 1-1/4” pipe.

Does this include the washer needed to form a seal?

Asked by ZJDiy May 31, 2018
3
Answers

Yes it does it part of the nut. Hope this helps

Do have this fitting with the 1 1/2" side threaded?

Asked by Bill March 23, 2018
2
Answers

The 1-1/2 side is the glue flange side and the 1-1/4 side accepts 1-1/4 trap pipe (typical bathroom vanity size) for compression ring fixation. Nibco also makes this in 1-1/2 x 1-1/2 for typical kitchen trap pipe.

1-1/2 in. PVC DWV Hub x Slip-Joint Trap Adapter - page 2

Customer Reviews

  • 30 Customer Reviews
  • 4.6 out of 5 stars overall
86% of customers recommended.
Overall Ratings
5star-icon(24)
4star-icon(2)
3star-icon(2)
2star-icon(0)
1star-icon(2)
Sort By:
cracked
the nylon nut cracked nibco should use pvc ones instead of nylon. i use genova trap adapters instead. they will last 40 years.
Was this helpful?
0
0
This PVC trap adapter performed as indicated, intended and expected without any problems...This i...
This PVC trap adapter performed as indicated, intended and expected without any problems...This item either performs well or does not perform at all...
Was this helpful?
0
0
Was this helpful?
0
0
Was this helpful?
0
0
worked just as planned....
worked just as planned.
Was this helpful?
0
0
Was this helpful?
0
0
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers