#1 Home Improvement Retailer

Internet # 316166184

Model # 410-014-0111

4 ft. W x 5 ft. H x 2 ft. D Black Steel Workbench with Built-In Power and Lighting

$180.41
Apply Now
Pay $155.41 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Rugged steel and wood construction built to last
  • 3 convenient power outlets for easy use with your tools
  • Built in lighting illuminates your workspace
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret
Product Details
  • Rugged steel and wood construction built to last
  • 3 convenient power outlets for easy use with your tools
  • Built in lighting illuminates your workspace
About This Product

The OLYMPIA 4 ft. Steel Lighted Workbench is the perfect solution for expanding your work and storage space. This premium workbench features a 13-Watt LED work light and built in power outlets. The lighting provides added visibility while working and the power outlets allow users to easily charge power tool batteries or conveniently plug in a tool. Standard features include a peg board, 2 drawers and top and bottom shelves for mounting, storing and accessing tools. It is constructed of durable steel with a composite wood table top. 2 Particle Board Shelves and a handy upper tray provide a convenient place for practically all of your tools.

Product ID #: 316166184Internet #: 843774100145Model #: 410-014-0111

Additional Resources

Shop All OLYMPIA
caret

Specifications

Dimensions: H 60 in, W 48 in, D 24 in

Dimensions

Assembled Depth (in.)24 inAssembled Height (in.)60 in
Assembled Width (in.)48 in

Details

Adjustable Workbench HeightNon-AdjustableAssembly RequiredYes
Assembly TypeFull Assembly RequiredColor FamilyBlack
FeaturesWith DrawersFrame MaterialSteel
IncludedHandle(s), Hardware, Lighting, Pegboard, Power Cord, Shelves, WorkbenchNumber of Drawers2 Drawers
Product Weight (lb.)83.78 lbReturnable90-Day
StyleContemporary, Industrial, ModernWeight Capacity (lb.)220 lb
caret

Questions & Answers

75Questions
caret
Q:Can you casters to this item for easy move
by|Sep 28, 2023
1 Answer
Answer This Question

A:  No, you can't certainly add casters to the OLYMPIA 4 ft. W x 5 ft. H x 2 ft. D Black Steel Workbench for easier mobility. This workbench is not designed to accommodate casters. Thanks

by|Oct 2, 2023
    caret
    Q:where it made
    by|Sep 10, 2023
    1 Answer
    Answer This Question

    A:  It's imported. Thanks

    by|Sep 11, 2023
      caret
      Q:What size holes are in the pegboard, 1/8 or 1/4?
      by|Mar 1, 2023
      1 Answer
      Answer This Question

      A:  It works well with both sizes pegs. Everbilt Set Works Great. The link as below. https://www.homedepot.com/p/Everbilt-1-8-in-Zinc-Plated-Steel-Pegboard-Organizer-Assortment-Kit-43-Piece-18027/202305472

      by|Mar 3, 2023
        caret
        Q:Height of table without back pegboard
        by|Feb 13, 2023
        1 Answer
        Answer This Question

        A:  35 in

        by|Sep 2, 2023
          1 found this answer helpful
          Showing 1-4 of 75
          caret

          Customer Reviews

          4 out of 5
          • 4 out of 682 reviews
          • 79% recommend this product
          Filter by:
          Showing 1-10 of 682 reviews
          Does the job if you just need any type of workbench
          Definitely a two-person job to assemble and takes a couple hours. Instructions arent super clear so we had to unscrew several times to redo parts. Peg board is a bit flimsy and the drawer bottoms are a much cheaper material that will not withstand much weight. I would recommend cutting your own thin plywood, or something similar, to be the bottoms for these drawers. Overall, an inexpensive option if you just need a table in your garage to build things on. Plus: The light is a cool addition.
          by
            • Recommended
            This was everything I was hoping it’d be! Fairly easy...
            This was everything I was hoping it’d be! Fairly easy to put together, everything was labeled. Definitely read the instructions carefully. I got this for some beginner level leather working, and I find this to be a very stable workbench for hammering on. I was worried it’d be loud doing this kind of work on it, but that is not the case and the tabletop is sturdy and solid. Excellent value, would buy two if I had the space. Only downside is no way to adjust the pegs on the legs if your floor is a bit uneven, but that was an easy fix with some wood planks for me.
            by
            • Verified Purchase
            3 found this review helpful
            The product.....is not the best quality but for the price a good buy. The assembly instructions a...
            The product.....is not the best quality but for the price a good buy. The assembly instructions are adequate but the various sized nuts and bolts are not clearly identifed/labeled in the instructions as to where to use them. All in all I'm satisfied and it does serve my purpose.
            by
            • Verified Purchase
            • Recommended
            1 found this review helpful
            It would’ve gotten a higher rating but I bought two...
            It would’ve gotten a higher rating but I bought two of the benches and only one them came with the arms to support the back peg board
            by
            • Verified Purchase
            Nice little workbench!
            Directions were a bit lacking... took some time to figure out which screws were intended for which steps, but not too bad - about 90 minutes to 2 hours. All-in-all though, a nice little add to my work area. I thru-bolted a chop saw onto it (why I needed the extra space to begin with, and have been very happy.
            by
              • Recommended
              I recently purchased this workbench because my wife wanted it. It looked like a good workbench. W...
              I recently purchased this workbench because my wife wanted it. It looked like a good workbench. When it arrived, it was heavy and looked well boxed minus the massive packing tape used. As I was putting this workbench together, I noticed certain defects and I would like to point that out. First off, the parts had no identification marks on them and it took about 45 minutes to properly identify them and mark them. Then as I was building the bench, I noticed that one of the drawers were not connecting correctly to the rail system. I open the drawer and it would fall out on the right side. This bench was not symmetrical at all as the peg board did not fit correctly either. I had to bend the board a little to get the screws in. The table top would not fit unless I put it on first then the board. The instructions were a little tough to read as some parts had holes in them and the instructions did not show that. So some parts were the same but what made them different was the holes for the table. The cuts of the steal was done incorrectly as one of the front panels that had the logo OLYMPIA on it was supposed to go on the front but didn't have holes on the top of it and instead it went in the back. The plastic feet guards it came with didn't fit. After trying all of them, one of the plastic feet split with me trying to get it to slide on. Lastly, the light fixture didn't work. I took it apart and noticed that one of the wires had came off and I had to solder it back on and then it worked (not to big of a deal). After building it, it looks nice and sturdy but the hassle of putting it together and the defects it had with the price I paid for this, makes me not want to purchase this again. Was hoping for a better product as when it did come in, was thinking about buying another one. Thus the bad review.
              by
                9 found this review helpful
                I love my new work station!! It was easy to assemble and the lighting is perfect for my crafting ...
                I love my new work station!! It was easy to assemble and the lighting is perfect for my crafting projects.
                by
                • Verified Purchase
                • Recommended
                1 found this review helpful
                Missing Parts, No Response
                This is a good bench,, above average quality and an easy build for this kind of cheap, Chinese made bench. But there is apparently no functional product assurance at the factory. Mine came with one part that doesn't go in this bench and several drawer parts missing. The part shown in the photos, labeled #12, is not the #12 part for this bench. The correct #12 and one other part were missing. I got this in early August. I have repeatedly tried to contact the company. I sent emails, with photos. Crickets. Nothing. They apparently are okay with the idea that you can randomly get a whole bench or just part of a bench. This is important to know. In theory you could drag the whole thing back to Home Depot if there are missing parts. Naturally, mine was already nearly done by then and it's would seem reasonable for a company to want to stand by their product. Anyway, sonething to know before making the same mistake.
                by
                Response from THD-CSOSep 30, 2020
                Dave, we are terribly sorry to hear that your experience has been anything less than excellent. We would love the opportunity to turn your experience around and encourage you to reach out to us at (866) 461-8665 or info@olympiatools.com, so we can have you enjoying your purchase!
                  8 found this review helpful
                  Beware of the Drawers
                  This work bench took about 5 hours to build mostly because of poor instructions. None of the parts were labeled although they are labeled in the instructions. The drawer slides are flimsy and do not slide properly. One of the drawers will not close. The workbench looks nice but not for heavy duty projects. The light is bright and the outlet is a plus. Make sure to have a rubber mallet handy or you will have a hard time trying to assemble the bench. I have emailed and called the company regarding the defective drawers with no response.
                  by
                    • Recommended
                    3 found this review helpful
                    disappointed depot
                    THE DRAWERS ARE WRONG... they are either the wrong drawers or they are made (less likely) incorrectly. There is a 5/8 in gap between both drawers and the bench top! ( enter moisture, dirt,
                    by
                    Response from THD-CSOct 2, 2020
                    Thank you annoyed, we appreciate you taking the time to share. We're sorry to hear that you're not satisfied with your purchase. We want to ensure the best possible experience with your purchase, and we would love for you to reach out to us directly so that we can have the opportunity to assist you further. Please, contact us at (866) 461-8665 or info@olympiatools.com.
                      2 found this review helpful
                      Showing 1-10 of 682 reviews