#1 Home Improvement Retailer

Internet # 316125030

Model # 26004

Store SKU # 1006374680

1/2 in. Push-to-Connect x 3/4 in. FHT Brass Washing Machine Installation Kit

$45.54
Apply Now
Pay $20.54 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Works on any combination of Copper, CPVC, PE-RT, and PEX Pipe
  • Provides everything you need to install a washing machine
  • Supply line is integrated to the stop valve for a leak free joint
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret
Product Details
  • Works on any combination of Copper, CPVC, PE-RT, and PEX Pipe
  • Provides everything you need to install a washing machine
  • Supply line is integrated to the stop valve for a leak free joint
About This Product

The SharkBite Washing Machine Connector with Angle Stop Valve has everything you need to install water supply and connections directly to washing machine in one step. The 5 ft. stainless steel hose is factory installed to the 1/2 in. stop valve the other end has standard 3/4 FHT. connections directly to the washing machine. The Trusted Quality Stainless Steel Lines by FLUIDMASTER and the SharkBite connections ensure quick set up and long-lasting durability. The kit includes a 2 pack of 60 in. (5 ft.) of stainless-steel supply line connected to a SharkBite 1/2 FHT. washing machine valve. Connect the valve to either the hot or cold-water supply and the attach the 3/4 in. supply line directly to the washing machine. The easy to mount valve features drop ear mounting tabs for stability and precise installation. The SharkBite push-to-connect end allows you to simply push on to Copper, PEX, CPVC or PE-RT without solder, clamps, unions or glue. Just insert the pipe and the stainless-steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in those tight spaces where your washing machine may be located.

  • Push-to-connect fittings require no solder, glue, unions or tools
  • 60 in. stainless steel hose x 3/4 in. FHT x 1/2 in. stop valve (2-pack)
  • Lead free DZR brass construction for durability and reliability
  • Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
  • Innovative push-to-connect design makes for quick and easy installation
  • PTC fittings or pipe can be rotated after installation making it easier to work in tight spaces
  • Designed for potable water distribution
  • Corrosion resistant to improve longevity
  • Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
  • Meets all UPC, IPC and cUPC requirements
  • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
  • Rated to 200°F and 200 psi
  • Return Policy
  • California residents
     see Prop 65 WARNINGS
Product ID #: 316125030Internet #: 697285260047Model #: 26004
caret

Specifications

Dimensions: H 2.75 in, W 9.75 in, D 11 in

Dimensions

Inlet Diameter (In.)1/2Outlet Diameter (In.)3/4
Product Depth (in.)11 inProduct Height (in.)2.75 in
Product Length (in.)60 inProduct Width (in.)9.75 in

Details

ApplicationPotable WaterCompatible Pipe MaterialMulti-Purpose
ConnectionPTCFeaturesLead Free, Removable
Indoor/OutdoorIndoorMaterialBrass
Maximum Pressure (PSI)200Maximum Working Temperature (F)200
Pack Size1Product Weight (lb.)1.07 lb
Returnable90-DayValve TypeWashing Machine

Warranty / Certifications

Manufacturer WarrantyMust be installed per installation instructions.
caret

Questions & Answers

3Questions
caret
Q:My washing machine is in the basement with copper water lines coming down, can these be connected upside down and still work?
by|Jan 1, 2024
1 Answer
Answer This Question

A:  Hello, Yes, the Sharkbite washing machine installation kit can be installed in any orientation. Regards,

by|Jan 2, 2024
    caret
    Q:This is referred to as a "kit" and clearly shows TWO hoses with valves attached. When I purchased this online and picked it up in store, there was only one hose with integrated valve. I promptly returned it. Should there have been two hoses?
    by|Aug 1, 2023
    1 Answer
    Answer This Question

    A:  Hi, The SharkBite 1/2 in. Push-to-Connect x 3/4 in. FHT Brass Washing Machine Installation Kit should of had two valves with hoses. If you have any questions or if we can be of further assistance you can call tech support at 877-700-4242. Kind regards,

    by|Aug 2, 2023
      caret
      Q:What is then length of the hoses?
      by|Mar 8, 2023
      1 Answer
      Answer This Question

      A:  Hi, The SharkBite 1/2 in. Push-to-Connect x 3/4 in. FHT Brass Washing Machine Installation Kit comes with a 60 in. stainless steel hose. If you have any more questions you can call tech support at 877-700-4242. (Kind regards,)

      by|Mar 9, 2023
        Showing 1-3 of 3
        caret

        Customer Reviews

        4.4 out of 5
        • 4.4 out of 22 reviews
        • 100% recommend this product
        Filter by:
        Showing 1-10 of 22 reviews
        These hoses are definitely the high quality assemblies that I have come to expect from the sharkb...
        These hoses are definitely the high quality assemblies that I have come to expect from the sharkbite brand. The braided lines are very strong and give you a lot of peace of mind after installation that they wont let go. If you are hesitating at all about the push to connect installation method, we have had a few of these fittings installed in our house for longer than we have owned it. Quality product from a good manufacturer.
        by
        • Recommended
        2 found this review helpful
        Sharkbite fittings make connections much easier than sweating pipe. Remember to clean the cut en...
        Sharkbite fittings make connections much easier than sweating pipe. Remember to clean the cut end of the copper pipe. Also make sure you measure and press the fitting on to the correct depth. These include the shutoff valve and hose as one piece. The valve is angled so it is meant to be used in a wall box. The only drawback is that the hose is crimped to the valve so when the hose needs to be replaced in 5 years you would need to replace everything.
        by
        • Recommended
        1 found this review helpful
        If you don't like sweating copper joints and glue is out of the question than you will like these...
        If you don't like sweating copper joints and glue is out of the question than you will like these shark bite hoses for your washer. They are the complete valve and hose combination that will save you a lot of aggravation with little or no mess. I have never had a problem with shark bite fittings and the hoses are plenty long enough at 60". I do recommend securing the fitting with 2 screws to cut down on vibration!
        by
        • Recommended
        1 found this review helpful
        Unlike traditional washing machine hoses, these have the shut off valve built in. It it a toss u...
        Unlike traditional washing machine hoses, these have the shut off valve built in. It it a toss up to recommend these or not as having the Shark Bite pipe connector means shutting the water off to the house, cutting the old valve off the pipe in the wall, and pressing the new valve on the pipe. If it is for a new home installation it would be fine. If the hose ever needs replacing, it will mean replacing the entire unit, valve and all since the hose is crimp fitted on the valve. This is a product made in China.
        by
        • Recommended
        2 found this review helpful
        This SharkBite 1/2 in. x 3/4 in. MHT Brass Push-to-Connect Washing Machine Installation Kit is going to be a big help in our laundry room remodel. I have never cared for the rubber hoses to connect the water to the washing machine. These stainless steel hoses are so much stronger and a lot less likely to burst open. And having the push to connect is really a time saver and so much easier to con. No sweat fittings to do and they are easy to remove if needed. In my case the 60" length is a big plus because I really need that little extra length. The hoses will also connect to pipes such as copper, PEX, CPVC or PE-RT.
        by
        • Recommended
        1 found this review helpful
        I have been a builder remodeler for 51 years, and as such I have had many opportunities to instal...
        I have been a builder remodeler for 51 years, and as such I have had many opportunities to install plumbing. But often, when remodeling and adding or modifying a line, a product like this SHARKBITE 1/2 IN. X 3/4 IN. MHT BRASS PUSH-TO-CONNECT WASHING MACHINE INSTALLATION KIT fits the bill well. While they are more expensive for the materials, the savings in time and setup will more than compensate for the added material cost, so it thereby provides an alternative.
        by
        • Recommended
        1 found this review helpful
        For years I wasn't comfortable using Sharkbite because it was new to me. About 6 years have passe...
        For years I wasn't comfortable using Sharkbite because it was new to me. About 6 years have passed and I've been through many homes that have used it for years with no issue. Sometimes do I prefer the traditional method? Sure, but I guess I don't have too much of a reason to fear it anymore. I like that it partnered up with Fluidmaster(hose) and it does what it does best and make the sharkbite connection. Remember to clean your copper pipe well before inserting it into the sharkbite and make sure you go in the correct depth. I only needed to change the hot water side but decided to do both since it came in a kit and it was so easy to do.
        by
        • Recommended
        2 found this review helpful
        Tops in quality and ease of installation with push to connect washing machine hose kit. The braid...
        Tops in quality and ease of installation with push to connect washing machine hose kit. The braided stainless steel hose is compressed onto brass closure valves and the opposite end of the sixty inch hose is the 3/4" washing machine connection. Complete instructions are on the back of the package. See Shark Bites webpage for full warranty information. These hoses have a great look and feel.
        by
        • Recommended
        1 found this review helpful
        We are moving the washer and dryer down to the basement to make a larger room. The SHARKBITE 1/2 ...
        We are moving the washer and dryer down to the basement to make a larger room. The SHARKBITE 1/2 IN. X 3/4 IN. MHT BRASS PUSH-TO-CONNECT WASHING MACHINE INSTALLATION KIT is a practical option for us DIYers that just haven’t mastered soldering. I like the ease of push to fit. And since the wall behind the pipes will be open, I think these hoses with angle fitting valves will be much easier for us to install. The braised hosing is great quality, very strong. The open/close valve is strong and easy to turn. The overall quality seems really good too. This push to fit technology should help get our project finished.
        by
        • Recommended
        1 found this review helpful
        Like all SharkBite connectors I’ve used, these hoses are perfect. They work on practically all ty...
        Like all SharkBite connectors I’ve used, these hoses are perfect. They work on practically all type of pipes (Copper, PEX, CPVC or PE-RT). No clamps or glue is needed. I’ve used a lot of SharkBite connectors and have never had one leak and I expect this one to be just as dependable. The hoses are stainless steel and well made, so you won’t have to worry about them bubbling out, and eventually bursting. They are 5' long which allows for the washing machine to be shifted around for convenience.
        by
        • Recommended
        1 found this review helpful
        Showing 1-10 of 22 reviews

        Compare Similar Items

        current item

        Connection

        PTC

        PTC

        PEX Barb x PEX Barb

        PTC

        Compatible Pipe Material

        Multi-Purpose

        Multi-Purpose

        PEX

        Multi-Purpose

        Application

        Potable Water

        Potable Water

        Refrigeration

        Potable Water

        Material

        Brass

        Brass

        Plastic

        Brass

        Maximum Pressure (PSI)

        200

        200 PSI

        0

        200