Store SO SKU #
A: Generac 5447 EZ transfer operator is supported by Generac, please reach out to them for assistance with replacement parts.
A: We would need to know the part# of your existing load center to determine if there is another option of the switch. Please send your request for information with the part# of your load center to firstname.lastname@example.org for further assistance.
A: Manual override is accomplished by actuating the appropriate breaker on the lower side of the GENTFRSWTCH as installed in the Generator Ready Load Center (one is the utility input and the other is the generator input). Since these are interlocked, one will turn off and the other on.
A: The switch only works in the Siemens panel. However, it will work with any generator in manual mode; or it will work in automatic mode with a proper control signal. Reference Generac Tech Manual link: soa.generac.com/manuals/4734567/0G1369
A: Shannon, This transfer switch is only designed for use in Siemens branded generator ready load centers.
|Name||100 Amp 240-Volt Non-Fused Emergency Power Transfer Switch||Transfer Switch Kit for Gen Ready Load Center||10-Circuit 30 Amp Manual Transfer Switch Kit||200 Amp 240-Volt Non-Fused Emergency Power Transfer Switch|
|Maximum Amperage (amps)||100||0||30||200|
|Power Distribution Features||No Additional Features||No Additional Features||No Additional Features||No Additional Features|
|Number of Circuits||0||0||10||0|
|Maximum Wattage||0 W||0||8000.000||0 W|
|THD SO SKU||1000499400||1000499067|
|View Product||View Product||View Product||View Product|