Compatible with Square D Homeline breakers except Plug on Neutral
4-jaw meter socket and aluminum bus bar included
Contact your local utility company to ensure requirements are met
Product Details
The Square D 200 Amp 20-Space 40-Circuit Outdoor Combination meter Socket and Main Breaker Load Center is suitable for use as a combination service entrance device (CSED). This unit is ANSI certified and UL listed with a maximum 10,000 AIR. The combination service entrance device features a Ring-type meter cover with a single-phase, 4-jaw meter socket. It is suitable for overhead or underground service applications. Meets EUSERC Specifications. Surface mount or convertible to semi-flush with appropriate flange kit. This CSED is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers, except Plug-on Neutral breakers. Homeline CSEDs are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline CSEDs are engineered for fast installation and wire savings.
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
Specifications
Questions & Answers
232Questions
Q:Is there any instruction how to mount this? No place to screw in wall beside the two hanging brackets which are not secured. Thank you
by|Jan 20, 2023
2 Answers
Answer This Question
A:Â This panel is designed to go on the surface of the wall. Â It is not a flush or semi-flush panel.
by|Jan 26, 2023
A:Â Hi,
No, there is no instruction bulletin because in this case is recommended to contact the local authority to confirm the application.
Regards, Schneider Electric Customer Care
by|Jan 20, 2023
Q:SC1624M100S can this model use as flush mount?
by|Jan 14, 2023
1 Answer
Answer This Question
A:Â Hi,
No, only surface mounted, the flush version is SC1624M100F.
Regards, Schneider Electric Customer Care
by|Jan 17, 2023
Q:Can this panel be mounted on a utility pole
by|Jan 14, 2023
1 Answer
Answer This Question
A:Â Hi,
This device is intended to be mounted on a wall, we recommend you to contact your local authority / utility to alllow this application.
Regards, Schneider Electric Customer Care
by|Jan 17, 2023
Q:Can I get the model number of the breaker by any chance?
by|Jan 3, 2023
1 Answer
Answer This Question
A:Â Hello Juan,
The Service disconnect supplied factory-installed is # QOM2125VH.
Regards, Schneider Electric Customer Care
by|Jan 4, 2023
Showing 1-4 of 232
Customer Reviews
4.4 out of 5
(234)
4.4
out of 234 reviews
87%recommend this product
5156
446
310
27
115
Filter by:
Showing 1-10 of 234 reviews
May 14, 2022
Great product
Great product. Plenty of space to work with. Breaker components are easily available. Approved with the power company.
by
Recommended
Oct 11, 2021
Awesome
These are great for Ameren approved in Illinois. Heavy but very nice
by
Recommended
Dec 30, 2019
Easy installation. I’m going to install another 200 amp panel...
Easy installation. I’m going to install another 200 amp panel and going to install the same one.
by
Verified Purchase
Aug 23, 2018
Excellent unit for an expansion project or a solar installation. My intention was to use the unit...
Excellent unit for an expansion project or a solar installation. My intention was to use the unit for a solar power installation on our new build garage / shop project. By the unit having a built in opening for a meter it would allow me to install a readily available analog meter for comparison purposes with the digital meters monitoring power usage on the solar equipment. It also gave me the ability to totally isolate the solar power or isolate individual circuits. Very handy indeed! The unit itself is built to Square D's high standards. I can pretty much install it and forget about it as it will surely outlive me barring any natural catastrophe. Circuit breakers are inexpensive and can be found most anywhere.
Dual use - Combination Service Entrance Device (CSED) or Main Lug Load Center
Model # RC12L200C Internet #100164237 Store SKU #204272
Square D Homeline 200 Amp 12-Space 12-Circuit Outdoor Ringless Overhead/Underground Main Lug CSED
This is truly a heavy duty load center, it weighs 34.5 pounds. The steel walls can take a lot of abuse.
Outdoor Combination Meter Socket and Main Lug Load Center (A main lug type load center does not have a main circuit breaker ) and is suitable for use as a Combination Service Entrance Device (CSED).
This CSED is Rain Proof and has two lock out points, one for the breakers and one for the main Lugs.
There is a removable cap if you want to run your service in from the top and knockouts on the bottom if you want to run it out the bottom.
IMPORTANT FACTS:
- For use with Homeline breakers only
- ANSI certified and UL listed with a maximum 10,000 AIR.
- Meets EUSERC Specifications
- NEMA type 3R enclosure for outdoor use
- Ringless meter cover with a single-phase, 4-jaw meter socket
- Accommodates plug-on secondary surge arrestor and features a plug-in design for easy installation
I chose this panel because i had a well to hook up to it and plan on adding a RV plug to it outsi...
I chose this panel because i had a well to hook up to it and plan on adding a RV plug to it outside. It has the channel to the top so it made it easy to run the conduit out the top into the soffit of the porch. The pass thru was easy to use and the large wires had ample room to hook up easy.
by
Verified Purchase
Recommended
1 found this review helpful
Dec 4, 2012
Great for outdoor add on items
This meter disconnect is great to install plus it has the main 200A breaker with space for future outdoor circuits. If you need pool or hot tub even outdoor lighting it's all right at the enclosure.
Homeline 125 Amp 16-Space 24-Circuit Outdoor Ring-Type Overhead/Underground Surface Mount Main Breaker CSED
The Square D 125 Amp 16-Space 24-CircuitThe Square D 125 Amp 16-Space 24-Circuit Outdoor Combination meter Socket and Main Breaker Load Center is suitable for use as a combination service entrance device (CSED). This unit is ANSI certified and UL listed with a maximum 10,000 AIR. The combination service entrance device features a Ring-type meter cover with a single-phase, 4-jaw meter socket. It is suitable for overhead or underground service applications. Meets EUSERC Specifications. Surface mount. This CSED is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline CSEDs are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline CSEDs are engineered for fast installation and wire savings.View Full Product Description
Homeline 200 Amp 30-Space 42-Circuit Outdoor Ring-Type Semi-Flush Mount Solar-Ready Main Breaker Plug-On Neutral CSED
The Square D by Schneider Electric HomelineThe Square D by Schneider Electric Homeline 200 Amp 30-Space 42-Circuit Outdoor Solar-Ready Combination Meter Socket and Main Breaker Load Center for Plug-on Neutral breakers is UL listed for residential and commercial power distribution. This combination service entrance device (CSED) is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers, including Plug-on Neutral. Homeline CSEDs are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline CSEDs are engineered for fast installation and wire savings.View Full Product Description
BR 200 Amp 42-Circuit Outdoor Solar Ready EUSERC Meter Breaker Panel
Eaton's residential meter breakers are serviceEaton's residential meter breakers are service entrance equipment systems that consist of a single meter socket and load center or a meter socket and main breaker combined in one enclosure. This design provides the contractor with labor and material savings. The meter breakers are constructed to meet the latest NEC wire bending space requirements. This is a EUSERC rated panel.View Full Product Description
CH 200 Amp 42-Circuit EUSERC Meter Breaker Outdoor Surface Mount
Eaton's residential meter breakers are serviceEaton's residential meter breakers are service entrance equipment systems that consist of a single meter socket and load center distribution section. This type of configuration is also known as All-in-1. This design provides the contractor with labor and material savings. The meter breakers are constructed to meet the latest NEC wire bending space requirements. Eaton is a trusted name in electrical products for over 100-years.View Full Product Description