Store SKU #
A: Don’t know. I threw the package out & their website ( https://www.tapcon.com/ ) doesn’t list specs. I would think each screw could handle 100#’s but you could go up to a 5/16 screw
A: I think that depends on the number of fasteners used and the integrity of the material you are attaching to.
A: Look here https://www.tapcon.com/
A: Hello, we do not currently publish values for use in wood and cannot recommend doing so. It would be more appropriate to use a GRK fastener for this application.
A: The Tapcon screws are designed as brick and mortar anchors. I do not use them with wood unless I am attaching the wood to brick or mortar. When used in that manner, I drill pilot holes through the wood and the brick or mortar before driving the screw. I like to have at least 1.5" of the screw actually in the brick or mortar to assure a secure attachment when high wind is a factor.
A: we installed ours with the dewalt, may need hammer drill for the holes if your going into hard concrete
A: You need a hammer drill and masonry bit to drill into concrete. Once the hole is drilled you can screw the Tapcon into the hole with a flat blade screwdriver but a nut driver or screw gun/impact driver with proper bit is easiest.
A: No, you can't use dewalt impact 20.You need a hammer drill for concretes.
A: Hammer drill all the way... and its for the predrill that you need it for, you can dive the screw with anything... but you'll also need a concrete drill bit which tapcon makes, conveniently.
A: I used my Ryobi 18+One Impact and it worked fine however I did snap the head off the first one using the highest torque setting. Once I cut back to the medium setting the rest went in fine
|Name||3/8 in. x 3 in. Hex Washer-Head Large Diameter Concrete Anchors (10-Pack)||1/4 in. x 1-3/4 in. White UltraShield Hex Washer-Head Concrete Anchors (75-Pack)||1/4 in. x 2-1/4 in. Star Flat-Head Concrete Anchors (75-Pack)||1/4 in. x 2-3/4 in. Hex-Washer-Head Concrete Anchors (150-Pack)|
|Anchor Diameter (in.)||3/8"||1/4"||1/4"||1/4"|
|Fastener Length (in.)||3 in||1.75 in||2.25 in||2.75 in|
|Fastener Type||Concrete Screws||Concrete Screws||Concrete Screws||Concrete Screws|
|Fastening Base Material||Brick,Cinder Block,Concrete||Brick,Cinder Block,Concrete||Brick,Cinder Block,Concrete||Brick,Cinder Block,Concrete|
|Features||Coated||Coated||No Additional Features||ACQ Rated,Coated|
|View Product||View Product||View Product||View Product|