|Inlet Size (in.)||.5||Product Depth (in.)||2.0625 in|
|Product Height (in.)||6.3125 in||Product Width (in.)||2.0625 in|
|Color Family||Blacks||Features||Adjustable, Retraction Spring, Riser|
|Head Material||Plastic||Inlet Type||Female|
|Irrigation System Component||Sprinkler||Material||ABS Plastic|
|Maximum Coverage Area (sq ft.)||706.5||Maximum Gallons Per Minute||4.33|
|Maximum Rotation (Degrees)||360||Maximum Spray Distance (ft.)||15|
|Minimum Spray Distance (ft.)||11.25||Mounting||In-Ground Install|
|Nozzle Material||ABS Plastic||Pack Size||1|
|Package Quantity||1||Pressure Rating||75|
|Returnable||90-Day||Riser||Riser Not Required|
|Sprinkler Angle Maximum (Degrees)||27||Sprinkler Angle Minimum (Degrees)||27|
|Sprinkler Head Material||ABS Plastic||Sprinkler Head Spray Pattern||Adjustable|
|Sprinkler Head Type||Fixed||Sprinkler Location||Below ground|
|Sprinkler Type||Pop-Up||Thread Type||Female NPT|
|Manufacturer Warranty||1 YR|
A: This item does not come with a pre-installed check valve for slopes. Thank you.
A: Frank, no this sprinkler spays 15' only adjustments available are 0-360 degree spay pattern, however you may be able to order a 7' 0-360 degree sprinkler that will fit your needs. Good luck.
A: For a variable pattern and 6’ radius, you will need Toro 570 Spray bodies (*various pop-up heights) and Toro nozzle model 53736 (The Home Depot Internet Number: 100340928). These nozzles have an adjustable pattern and the radius can be reduced to 6’ using the small screw on the top of the nozzle. *Toro 4” spray body without nozzle is model 53821 (The Home Depot Internet Number: 202176083)
A: Twist the top of the nozzle left or right to decrease, or increase, the pattern.
A: When looking down at the spray tip, you turn the shaft to set the left edge of the spray pattern. Then you turn the tip so that the tiny arrow on the top faces 180° away from the left spray edge. It sounds complicated, but it requires no tools, and once you've done one, you can set others without even having the water on.
A: Yes, the distance can be reduced by 20% by tightening the screw on the top of the nozzle.
A: Yes, by turning the flat-headed screw in the center. It'll adjust from full 15' spray arc to completely turned off.