#1 Home Improvement Retailer

Internet # 100390125

Model # 2755

Store SKU # 779225

Heavy Duty Top Plate - 5.5 in. x 3 in. - 16G Steel Mounting Hardware - Furniture Leg Easy Installation

$3.94
  • Securely fasten your table legs with this mounting plate
  • Allows leg to hang straight from furniture to floor
  • Compatible with any bolt hanger style table leg or bun foot
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

Tackle your DIY home projects with ease thanks to this mounting hardware from Waddell. This heavy duty top plate provides a solid base to fasten your table leg and allows it to hang straight from the furniture to the floor. It is ideal for installing our quick mount style table legs and bun feet with hanger bolts. The 16G steel construction ensures long-lasting durability so you can rest assured your furniture will stand strong for a long time.

Highlights

  • Ideal for installing quick mount table legs or feet with 5/16 inch #18 thread bolt hangers
  • Provides a solid base for fastening furniture legs securely
  • 16 gauge steel construction with zinc plating to ensure long-lasting durability and protection from corrosion
  • Designed to let leg hang straight from furniture to floor
  • Note: product may vary by store
  • Return Policy

Product Information

Internet # 100390125

Model # 2755

Store SKU # 779225

Additional Resources

Shop All Waddell
From the Manufacturer

Specifications

Dimensions: H 3 in, W 5.5 in, D 0.25 in

Dimensions

Product Depth (in.)

0.25 in

Product Height (in.)

3 in

Product Width (in.)

5.5 in

Details

Fastener Callout Size

3/16 inch

Fastener Type

Furniture Connector

Finish Family

Other

Material

Metal

Package Quantity

1

Primary Use

Mounting table legs

Product Weight (lb.)

0.21 lb

Returnable

90-Day

Warranty / Certifications

Manufacturer Warranty

N/A

Questions & Answers

39Questions
caret
Q:Can these be used with your model #2512 tapered leg?
by|Jul 3, 2023
1 Answer
Answer This Question

A:  No. See my review with photos. The threaded post from the legs from the exact same vendor (Waddell) extend up and PAST the top plane of the bracket. I had to add 2-inch fender washers as spacers between the leg and the plate.

by|Jan 9, 2024
    caret
    Q:What is the maximum/minimum length of the hanger bolt it can take. I know the bolt should have type 5/16 in.-18 tpi but how much can it stick out of leg? 0.5in, 1in, 2 in ??
    by|Jun 1, 2023
    1 Answer
    Answer This Question

    A:  I bought two of these Top Plates, along with two legs sold by Home Depot in the same section, both by the very same vendor (Waddell). I did not measure the length of the legs' bolt, but when hand-tightened into the bracket, the bolt extends above and PAS

    by|Jan 10, 2024
      caret
      Q:Hat size screw is needed
      by|Feb 4, 2023
      0 Answer
      Answer This Question
      caret
      Q:Whats the diameter of the circle where the leg screws in? I have legs that are about 2 inches in diameter I want to make sure they'll fit
      by|Nov 5, 2022
      1 Answer
      Answer This Question

      A:  It is 2 inches in diameter. Be aware that these are made of thin, stamped sheet metal with a tack-welded nut, and the two I bought were slightly warped.

      by|Jan 9, 2024
        Showing 1-4 of 39

        Customer Reviews

        4.6 out of 5

        • 4.6 out of 259 reviews
        • 86% recommend this product
        Filter by:
        Showing 1-10 of 259 reviews
        Junk - Shame on Home Depot
        Thin sheet metal with a tack-welded nut. Both that I bought were slightly warped resulting in legs not 90 degrees. WORSE, the legs sold by HD in the same section from the VERY SAME VENDOR (Waddell) are NOT COMPATIBLE. When hand-tightened, the legs' stud extends ABOVE the top-plane of the top plate, so it's impossible to mount flush to the table underside. I had to add 2-inch fender washers to correct. See photos. Pathetic. Shame on Home Depot.
        by
          Used these to attach legs to a small shelf I was building. Super easy to use, installed all 4 wit...
          Used these to attach legs to a small shelf I was building. Super easy to use, installed all 4 within just a few minutes. I loved that they're low profile so. It visible from the front as well.
          by
          • Verified Purchase
          • Recommended
          1 found this review helpful
          IF I could give them ZERO stars I would
          All 4 of the installed plates broke within minutes of screwing the legs into them. Heavy Duty WHERE? I didn't even get the desk upright before the square bits with the threaded holes popped out of the rest of the bracket.
          by
            9 found this review helpful
            Worked great!!! Recommended if you need these....
            Worked great!!! Recommended if you need these.
            by
            • Verified Purchase
            Just as described. Attached the bun feet without any issues.
            Just as described. Attached the bun feet without any issues.
            by
            • Verified Purchase
            • Recommended
            2 found this review helpful
            Durable, Easy to Install!
            I bought these to go on a big desk I'm building out of Ash (it will be heavy) and wanted something extra durable to hold some 6"-tall bun feet on. I haven't installed these hangers yet but they are made out of very thick metal and have a total of 5 screws to attach. The actual threaded area is only about 1/4" deep.. I wish it was a bit deeper to grab more onto the threads of the feet but I'm sure it will be fine! While the desk is in the shop being built I am going to install caster wheels on these hangers for ease of moving back/forth to storage and assembly area, then when I'm at the final stage I'll swap out wheels for the feet! 1 out of 4 of the hangers needed to be exchanged. The actual bolt part of the hanger was welded crooked onto the bracket part so there was a 1/4" gap on one side (see picture) after I installed the feet. Not a big deal since Home Depot is great with returns.
            by
            • DIY
            • Verified Purchase
            • Recommended
            28 found this review helpful
            by
            • Verified Purchase
            by
            • Verified Purchase
            This part was a simple replacement for an existing part that failed after 7 years
            by
            • Verified Purchase
            by
            • Verified Purchase
            Showing 1-10 of 259 reviews