Questions and Answers for 3M High Strength Small Hole Repair, All in One Applicator Tool

A:  Great question. Yes! This will work for your project. If you need further assistance, please connect with our team at 1-800-494-3552 Monday - Friday 8:00 am - 4:30 pm CT and provide case number 37302993. Thanks again, we look forward to your call.

A:  Great question. This is a water base product. Once open it is best to put into a zip lock bag to help with drying out. We recommend that it be stored in a regulated temperature. We do not recommend that this be stored in a truck as the temperatures will flex with hot to cold. If you need further assistance please reach out to our team at 1-800-494-3550 Mon - Fri 8:00-4:30 CT and provide case #35315790. Thank you.

A:  Great question. This is a water base product and will not work to repair a chip in your bathtub. Please reach out to our team if you need further assistance. We can be reached Mon-Fri 8:00 - 4:30 CST at 1-800-494-3550 and provide case # 35315213. Thank you.

A:  Great question. We do not recommend for this application. If you need further assistance please contact our team at 1-800-494-3552 Mon- Fri 8:00 - 4:30 CT and provide case # 32234907. Thank you.

A:  Thank you for asking! Due to the technical nature of your request please call our certified team at 1-800-494-3552 M-F 8am-4:30pm CT and provide case number 32116793. They can gather your information and let you know the best product to meet your needs. Thanks again, and we look forward to your call.

A:  Great question. Due to the variables it will vary, How much product used, size depth of area. Temperature, humidity air flow will all play a part in the dry time. You can sand when dry to the touch. Most cases within a hour or longer. Full cure time is 24 hours. If you need further assistance please reach out to our team at 1-800-494-3552 Monday - Friday 8:00 - 4:30 CT and provide case number 31877503. Thank you.

A:  Yes.

A:  Yes

A:  Yes

A:  Yes, this product is intended for small nail holes or dents. It has a built in primer and sanding disk so you will be ready to paint right away. If you need further assistance please reach out to our team at 1-800-494-3552 Mon-Fri and provide case # 29772128. Thank you.

A:  Yes. You can sand and paint over the 3M filler.

A:  We have plaster board and a curtain rod holder fell out leaving a small hole no bigger than 1/2" diameter and about 1/2" deep. I applied the filler and waited 24 hours. Sanded it a bit and drilled small pilot holes. It didn't hold and is going back.

A:  Thank you for asking! Due to the technical nature of your request please call our certified team at 1-800-494-3552 M-F 8am-4:30pm CT and provide case number 28003407 . Thank you.

A:  Yes, this can be used.