A: Hi Louis, thank you for your question. The Direct-To-Metal Paint can be applied to clean and dry wood surfaces. Have a great day! - Randy
by|Aug 30, 2024
Q:Use for primed exterior door
by|Aug 29, 2024
1 Answer
Answer This Question
A: Hi Bill, thank you for your question. The Direct-To-Metal Paint can be applied to a primed exterior door. Have a great day! - Randy
by|Aug 30, 2024
Q:Is this paint good for aluminum patio furniture
by|Aug 29, 2024
1 Answer
Answer This Question
A: Hi Maximo, thank you for your question. Yes, our Direct-To-Metal Paint can be used on patio furniture. Have a great day! -Giovanna
by|Aug 29, 2024
Q:Can this be applied as a primer to pressure washer cleaned but un-etched galvanized metal roofing?
by|Aug 24, 2024
1 Answer
Answer This Question
A: Hi Daniel, thank you for your question. As it turns out, we do not recommend our Direct-To-Metal Paint for roofs. Alternatively, you can prime the surface with our Multi-Surface Primer (No.436). Please note that glossy surfaces can make it tough for coatings to adhere, which is why we recommend etching or scuff sanding the surface to help ensure adhesion before priming. Please feel free to reach out to us directly if you have any other questions. -Lina
by|Aug 26, 2024
Q:How long does this take to dry on steel piping?
by|Aug 22, 2024
1 Answer
Answer This Question
A: Hi Dawn, thank you for your question. The paint will dry to the touch in 1 hour and it can be recoated in 3 hours. Longer dry time required in cooler temperatures and higher humidity. It takes about four weeks for the paint to fully cure. Good luck with your project! -Giovanna
by|Aug 22, 2024
Q:can this be painted directly over rust
by|Aug 20, 2024
1 Answer
Answer This Question
A: Hi tasker, thank you for your question. Applying our Direct to Metal Paint directly over rust is not recommended. Instead, it's best to remove all rust before application. Then, our Direct to Metal Paint will provide a rust-inhibitive finish. For optimal corrosion protection, you can prime first with our Behr Multi-Surface Primer No. 436. Good luck with your project! -Alex
by|Sep 16, 2024
1 found this answer helpful
Q:I'm planning to use this to repaint my Bilco door. The existing paint has failed in some spots. What grit sandpaper do it need to use when sanding out these spots to ensure a smooth finish?
by|Aug 17, 2024
1 Answer
Answer This Question
A: Hi Ralph, thanks for the question. I'd recommend using 180-220 grit sandpaper for sanding the areas that need to be fixed on your Bilco door before painting. Have a great day! -Ronald
by|Aug 19, 2024
Q:I need to paint my enclosed cargo trailer. Can I use this paint for that?
by|Aug 12, 2024
1 Answer
Answer This Question
A: Hi Lara, thank you for your question. Please reach out to us directly so that we can learn more details about your project and recommend the right product. We look forward to hearing from you! -Giovanna
by|Aug 12, 2024
Q:I do not see the color i want from the samples. Can i bring the color to the store and have someone mix it for me?
by|Aug 11, 2024
1 Answer
Answer This Question
A: Hi paula, thank you for your question. Yes, the Direct-To-Metal Paint can be color matched with a sample at your local store. Good luck with your project! -Giovanna
by|Sep 16, 2024
1 found this answer helpful
Q:Can you match color
by|Aug 6, 2024
1 Answer
Answer This Question
A: Hi Ronnie, thank you for your question. The Direct-To-Metal Paint can be color-matched. See your local store for assistance. Have a great day! -Giovanna