Questions and Answers for Ceilume 9 fl. oz. Ceiling Tile Adhesive (6-Pack)

A:  You should be able to install 6 ceiling tiles with a single 9 oz tube of Ceilume Ceiling Tile Adhesive. 540 sq ft works out to about 135 ceiling tiles. 135 divided by 6 = 22.5 Tubes of adhesive so 4 cases will give you a little extra "just in case".

A:  Ceilume's Ceiling Tile Adhesive is made for use on a wide variety of materials: vinyl, mineral fiber, polyurethane and polystyrene foams. "Styrofoam" is not listed as one of the suitable materials for use with Ceilume's adhesive. Please consult with the folks at A La Maison for the proper adhesive for their styrofoam tiles.

A:  Ceilume's Ceiling Tile Adhesive is not recommended for use with Copper, Tin, or any other metallic ceiling tiles. Please consult with the Pros at your local Home Depot store to find the best adhesive for use with copper tiles.

A:  For your application of 12 x 12 interlocking tiles being attached to wooden slats, we'd suggest a standard construction adhesive. Consult with the Adhesive Pros at your local Home Depot store for the best construction adhesive for this installation.

A:  No

A:  No, The Ceilume Ceiling Tile Adhesive is a white compound that is white when it dries.

A:  Haven’t used mine yet because installation is delayed due to Covid-19.

A:  No, it does not dry clear.

A:  You will need a caulking gun for the Ceilume Ceiling Tile adhesive.

A:  Yes, you need a standard size caulk gun for using these. Watch out, if the adhesive gets to the outside edges of your tiles, the caulk will dry and be visible.

A:  If you're buying ceiling tile adhesive in the 10.1 oz cartridges than you will need the gun.. it's cheap and easy to use..

A:  Yes, you will need a caulk gun. Good luck with your project.

A:  yes

A:  I would put a line of glue around the tile and maybe an x in the middle. So, it isn't a huge amount, but it isn't small, either. I do know that I couldn't get any other adhesive to work, no matter what kind it was. Sometimes, I would still have to hold the tile up for a bit to make sure it had attached completely.

A:  You have to use a fair amount of adhesive for each tile. I've done the ceiling on two small bathrooms so far. My most recent install was an 11'x5' bathroom and I used roughly 8 tubes (I had two left over from my smaller bathroom.) You will know very quickly if you don't use enough because the tile will fall off the ceiling after a few minutes of adhesion.

A:  1/8 of the tube

A:  hi depends on the type of ceiling how even it is if is even you only need a couple of drops or all around the tile one tube of adhesive could be use for 12 to 15 titles

A:  Yes, the Ceilume Ceiling Tile adhesive will work in a high moisture area as long as the ceiling is completely dry and free from cracks, leaks, or unsound drywall/plaster. After installation of ceiling tiles, allow 24-48 hrs for the material to cure before using the shower.

A:  Im sorry never use this in a hi moisture are You ll have to check the product specifications on the tag Jnino