A: Hi TNtck, Internet #300848313, Model #WBC100G, Store SKU #214574
by|Feb 7, 2024
1 found this answer helpful
Q:What is the volume of this box?
by|May 23, 2023
1 Answer
Answer This Question
A: Hi Edge, 18.3 Cu In
by|Mar 9, 2024
1 found this answer helpful
Q:Hi, I'm trying to find a compatible in-use cover for this box? But I don't see a size that matches this box. Do you sell in-use covers ? Preferably a deep version for larger plugs. Thanks
by|May 2, 2023
2 Answers
Answer This Question
A: Hi Tyzen, for a plastic cover is Internet #300849084, Model #WCW2PC, Store SKU #462988 or for a metal cover is Internet #300853022, Model #WCW2G, Store SKU #146190
by|May 3, 2023
A: Wrong. Those are not compatible
by|Nov 10, 2023
1 found this answer helpful
Q:Can you use 1/2" EMT and connectors with these?
by|Feb 1, 2023
2 Answers
Answer This Question
A: Macca, The boxes are designed to be used with pipe.
by|Mar 4, 2023
1 found this answer helpful
A: Yes, with a threaded emt connector
by|Jun 2, 2023
Q:Are the holes on the top and bottom the same thread size as a metal Romex connector
by|Jan 26, 2023
2 Answers
Answer This Question
A: Yes you need to see what the hole size is then match the romex or type of wire connector to that size , for example, 3/4 hole goes with 3.4 connector
by|Mar 4, 2023
1 found this answer helpful
A: Hi Paulk, the holes are ½” NPT (National Pipe Thread). You would not use a romex connector on an Outdoor Weatherproof box.
by|Sep 28, 2023
3 found this answer helpful
Q:Are they corrosive resistant
by|Jan 24, 2023
3 Answers
Answer This Question
A: The box is aluminum which won't rust but will corrode in certain environments. That doesn't mean the box isn't resilient because it is. The tabs on the inside are steel and can corrode if water or chemicals infiltrate the box.
by|Jan 30, 2023
A: I kevin, the aluminum box is powder coated and the metal plates are zinc plated.
by|Jan 24, 2023
A: Yes.
by|Jun 23, 2024
Q:Do the rain tight connectors fit into the knockout holes for a waterproof connection? I tried in the store but the locking washer won?t attach to the inside and it won?t thread all the way in. Not sure how to make it a water tight connection.
by|Nov 1, 2022
2 Answers
Answer This Question
A: Take the lock ring off and thread the connector into the box
by|May 29, 2023
A: Hi Barrett, the boxes are designed for the pipe to tread directly into the box.
by|Mar 4, 2023
1 found this answer helpful
Q:do you have an option for black instead of grey color for oudoor flood lights
by|Oct 21, 2022
2 Answers
Answer This Question
A: Sometimes the boxes come in white, and bronze. Bronze is very close in appearance to black.
by|Oct 25, 2022
A: Hi Handy, we have bronze (Store SKU #677515)
by|Oct 21, 2022
Q:My box leaks in pouring rain from the top hole covered by a plug without gasket. I used plumber sealant on the thread but it still leaks. Will a gasket help? Where to get the gasket? Other suggestions?
by|Aug 9, 2022
3 Answers
Answer This Question
A: I don’t think a gasket is available. I used loctite 243 to seal the threads and that is working.
by|Mar 4, 2023
1 found this answer helpful
A: Fill it fill of silicone
by|Mar 4, 2023
1 found this answer helpful
A: Hi DavidK, the cover that goes on the box has a gasket. The closure plug with silicone sealant will seal good.
by|Mar 4, 2023
1 found this answer helpful
Q:Two questions:
1. do you have any boxes with just holes on one side instead of two top/bottom ?
2. how do seal an open unused hole ?
by|Jul 5, 2022
2 Answers
Answer This Question
A: Hi ScottF, the boxes all have holes on multiple sides that are easily sealed with plugs that are supplied with the box and a silicone sealant that you purchase.
by|Jul 5, 2022
A: I have not seen any boxes with just the single, threaded inlet. They come with two threaded plugs to close off any unused inlet. Side note, the threaded plugs can be purchased by themselves.