A: The price is $159.00 not $1599.00, figure it out.
by|Aug 1, 2023
2 found this answer helpful
A: The DCD708C2 is made in Mexico.
by|Aug 31, 2023
4 found this answer helpful
A: Their site says it's made in the USA with global materials
by|Aug 31, 2023
3 found this answer helpful
Q:What model is this one
by|Feb 20, 2023
2 Answers
Answer This Question
A: DEWALT ATOMIC 20V MAX Cordless Brushless Oscillating
by|Apr 16, 2023
12 found this answer helpful
A: The model number is DCS354B.
by|Nov 22, 2023
10 found this answer helpful
Q:Can De Walt 20v chargers be used on 220v - 50hz a/c power?
by|Jan 27, 2023
1 Answer
Answer This Question
A: Hi Donny, the charger is compatible and used with 120V.
by|Aug 1, 2023
1 found this answer helpful
Q:How long a battery last after a single full charge? (if continuously used)
by|Jan 22, 2023
2 Answers
Answer This Question
A: Battery run time may vary depending upon factors including but not limited to charging conditions, usage of tool, storage, environmental conditions, age, etc. Because of these factors, DEWALT is unable to provide a run time.
by|Aug 1, 2023
3 found this answer helpful
A: An hour then an hour to charge it back up
by|Aug 23, 2023
5 found this answer helpful
Q:Can I put a 8 amp hour battery on the drill?
by|Jan 7, 2023
2 Answers
Answer This Question
A: Yes, you can use DCB208 which is a 8AH battery.
by|Aug 1, 2023
1 found this answer helpful
A: Of course as long as it is a Dewalt 20volt battery
by|Aug 1, 2023
1 found this answer helpful
Q:Does the 5 hour battery take a different charger that the 2 hour battery.
by|Jan 5, 2023
3 Answers
Answer This Question
A: All the 20 volt batteries use the same charger, small to large.
by|Aug 23, 2023
2 found this answer helpful
A: No, a 12V-20V DEWALT charger will charge all DEWALT 20V batteries.
by|Aug 23, 2023
3 found this answer helpful
A: Both will work with DeWalt 20v max battery chargers. It will not work with 12v chargers.
by|Aug 23, 2023
3 found this answer helpful
Q:Is this drill good for cerment
by|Dec 28, 2022
2 Answers
Answer This Question
A: A hammer drill works best for concrete.
by|Aug 1, 2023
2 found this answer helpful
A: The impact function makes this tool particularly useful for driving fasteners in wood, metal and concrete.
by|Aug 1, 2023
5 found this answer helpful
Q:Can use this dill to mix concrete?
by|Dec 27, 2022
5 Answers
Answer This Question
A: I have used it to mix Thunder concrete and it works fine. I think if you don’t do too much at a time, it would work. It gets hot after a while of continuous use just like any drill.
by|Aug 1, 2023
2 found this answer helpful
A: I would say this is not the proper tool to mix concrete, but creativity is always a good thing. So depending on the amount of concrete you want to mix, and your ability to be creative, you might be able to get good results. This is a good tool for what it is designed for.
by|Aug 1, 2023
1 found this answer helpful
A: It is plenty strong enough, but was not made for this type of work. I purchased one to rotate tires on my truck. This unit is amazing.
by|Aug 1, 2023
1 found this answer helpful
A: This will depend on how much concrete needs to be mixed. For small amounts, cement and water only. Mixing in small burst to not overheat the drill.