Q:Can I use the (Nextile 30 in. x 60 in. x 60 in. 4-Piece Direct-to-Stud Alcove Tub Surround in White) on the Delta 40034R?
by|Dec 6, 2023
1 Answer
Answer This Question
A: Hi Tjd329,
Thank you for your question about the Delta Faucet model 40034R.
Unfortunately, we can't guarantee a different brand of wall surround will fit this tub. The 30" walls would be shorter than the 32" ends of the tub.
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
by|Jun 7, 2024
Q:How can this tub be better insulated or supported? There is a big hollow gap b/n the body of the tub and the skirt cover across the front; also around the sides b/n the tub and the walls. I saw a diff tub w molded Styrofoam around the base to solidify it
by|Feb 7, 2023
1 Answer
Answer This Question
A: Hi jodynroy,
Thanks so much for contacting Delta Faucet Company!
You can insulate the tub with fiberglass insulation or spray-foam products.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
by|Feb 9, 2023
Q:What is length of basin bottom?
by|Dec 16, 2022
1 Answer
Answer This Question
A: Hi Alda,
Thanks for your question regarding 40034L! The internal length is 40 3/8".
Please feel free to contact us with any questions or for further assistance.
Best Regards,
Emma
Digital Communications Specialist
by|Dec 19, 2022
Q:Is the apron support sold separately
by|Aug 19, 2022
3 Answers
Answer This Question
A: Hi matt,
Thanks so much for contacting Delta Faucet Company!
We do not manufacture a bathtub apron at this time. We apologize for any inconvenience this may have caused.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
by|Aug 20, 2022
A: We didn't buy anything extra...the contractor framed up the base it sits on.
by|Nov 18, 2023
1 found this answer helpful
A: As I can remember it comes with a support you’re supposed to screw down to the floor and lock the skirt into place.
by|Aug 24, 2022
Q:Is there a right drain tub that works with the walls
by|Aug 11, 2022
1 Answer
Answer This Question
A: Hi Mury,
Thanks so much for contacting Delta Faucet Company!
Yes, we offer model B10513-6032R-WH which features a drain on the right hand side.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
by|Aug 12, 2022
Q:Hi do I have to set this tub in a bed of mirror?
by|Aug 4, 2022
1 Answer
Answer This Question
A: Hi Randy!
Thank you for your question and we are happy to help. The Delta Classic 400 does not require a mortar bed. With any further questions or concerns, please do not hesitate to reach out to us again.
Best Regards,
Carrie
by|Aug 4, 2022
Q:Is this tub approved by the Massachusetts plumbing code?
by|Aug 3, 2022
2 Answers
Answer This Question
A: Hi DDTM,
Thank you for your question about the Delta Faucet model 40034L.
Yes, this tub has approval code P3-1217-227.
Please contact us directly if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
by|Aug 4, 2022
A: I would suggest that you contact your local City Hall & ask them for the specs & then compare them to the specs listed for this item. I'm not sure anyone nationwide can answer this directly. I'm in Washington state & used to work in City Government so that's why I answered the way I did. Good Luck
by|Aug 7, 2022
Q:Need to know what Drain and Overflow is used with the Classic 400 60" Right drain Bathtub. I know it requires a 16 1/2" Deep and 13 7/8 Drain and Overflow from reading the installation instructions.
by|Jul 30, 2022
1 Answer
Answer This Question
A: Hi 40034R,
Thank you for your question!
Delta Faucet drain assembly models RP293, RP393, and RP693 can be used with this bathtub.
Please contact us directly if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com