Questions and Answers for Delta Foundations Single-Handle Standard Kitchen Faucet with Side Sprayer in Chrome

A:  yes

A:  No, it does not

A:  Not on the one I got.

A:  yes it dose

A:  Hi, Chucky49! Thank you for your question. The Delta B4410LF faucet does include a quick connect hose connection for the side sprayer. Best Regards, Rosanna

A:  Most kitchen sinks have at least 3 holes, the outer holes 8” on center. To mount this faucet without the plate, would leave at least 2 holes exposed. I would not recommend that. I do not understand, not wanting to install the plate. Hope this helps.

A:  The deckplate is not optional on this model.

A:  Hello, Thank you for your question. The Delta B4410LF-SS cannot be installed without the escutcheon plate. The escutcheon plate is apart of the spout body. We do offer two hole faucet such as the model 175LF-WF or 441-DST. Feel free to contact us directly at 1-800-345-3358 or customerservice@deltafaucet.com with any questions. Best regards, Brandis

A:  No. The bottom of the faucet assembly is designed to sit on the plate. Also it secures to the sink with screw and nut connections through the holes on either side of the main faucet hole. That is the only way to secure to the sink. You will have to shop for a faucet specifically designed for a one hole connection.

A:  1 800 345-3358. customerservice@deltafaucet.com

A:  Thank you for your question, Photog. Please feel free to contact our customer service team for help! We can be reached by any method below. Best regards, Jon Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

A:  Contact manufacturer.

A:  no clue - I suggest contacting Delta on-line

A:  It depends the positioning of the four holes in the sink! The faucet plate will cover 3 holes, 8” on center! The sprayer will use one hole! So if your sink is standard, this faucet will work!

A:  yes, and other holes will covered by the plate.

A:  Hi Liss, Thank you for your question. The Delta Foundations Kitchen B4410LF faucet is a 4 hole installation faucet. This unit can not be adjusted to be a 2 or 3 hole installation setting. https://media.deltafaucet.com/SpecSheet/dsp-k-b4410lf_F.pdf Best regards, Tanya

A:  Most kitchen sinks have at least 3 holes, the outside holes 8” on center. This faucet will use only 2 holes. The center hole will accommodate the hot & cold supply lines & the hose from the sprayer. The hole away from the 3, will accommodate the sprayer. The plate will cover the other 2 holes. Hope this helps.

A:  Sounds like there is a buildup of calcium inside the faucet on the seals. Only way to fix this is to take it apart and clean it, or replace the seal kit inside. these can be bought at home depot in the plumbing section. they are very easy to replace. If you don't want to pay a plumber to do it you can find instructions on how to do it your self on the Home depot website or youtube.

A:  The little blue/red button in the handle pops out. then use a small hex wrench counter clockwise to remove handle. Use a wrench to tighten valve body. Replace handle,if leak persists,O-ring in body may need to be replaced, or valve body itself.

A:  I turned My water off in the shut off valve in the basement

A:  Hi, Pinky! Thank you for your question. I am sorry to hear that you are experiencing an issue with your Delta faucet. We recommend to replace the repair kit to fix the leak. The repair kit number is RP77763. There is a small set screw that can be tightened for the handle. You will want to use a 1/8" allen wrench to tighten the unit. Best Regards, Rosanna

A:  Such an attachment could be purchased, but didn't come with this item.

A:  No the aerator is not threaded. It has to be remove and your threaded adapter that came with your portable dishwasher has to be installed on the facet

A:  Hi, DD! Thank you for your question. The B4410LF aerator is threaded. Best Regards, Rosanna

A:  yes you need an adaptor

A:  If you take the airator out you will have a female thread inside the faucet but I can’t tell you if your dishwasher will connect to it .if you have that type of adapter it might be fine.

A:  I think you're referring to a condition known as "water hammer." It's usually related to water pressure that's too high coming into the house. It was a problem I had. I didn't have that kind of problem until we built this house. The plumber tested the pressure coming to the house at 155 psi. That was about 2 times the recommended pressure. Is it possible that's your situation? Have you noticed a single thump or bang when you shut off a faucet quickly? If so a water pressure regulator would fix it. Does the thumping happen with both the hot and cold? Those regulators are expensive and not always a DIY project. If you have one on your house already it's possible that it needs to be replaced or rebuilt because they do wear out. The only other thing you could try is adjusting the flow at the shutoff valve under the sink. Sorry you're having this problem.

A:  Probably the water pressure needs turned down.

A:  It's a defective part in the faucet. Call Delta to get a new part.

A:  Hi, Worley291! Thank you for your question and I am sorry to hear that you are experiencing a thumping noise from your sprayer assembly. There could be debris in the unit itself. To clean, remove the spout and unscrew the diverter assembly. You can use a very large flathead screwdriver or a quarter held with a pair of needle nose pliers to unscrew the diverter assembly. Reinstall the spout and also unscrew the aerator from the end of the spout. Turn on the hot and cold water at full pressure and allow the water to run for 10 to 15 seconds. Turn off the water and reinstall all of the components.  This should remove any debris interfering with the operation of the diverter. If this does not fix the issue, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna

A:  If your sink has an opening on the left, yes you can position it there.

A:  Yes, you can have the sprayer on either side.

A:  The sprayer can be installed on either side, depending on how the countertop is drilled.

A:  Yes, the sprayer can be mounted on either side because it has a very long hose and connects to the middle of the faucet.

A:  Hi, Tony! Thank you for your question! The sprayer assembly can be mounted to the left or the right of the faucet. Best Regards, Rosanna

A:  It will get sticky if lime, dish soap or some other gunk found its way in there. You can try lithium spray, but you might want to clean it the best you can first.

A:  How long ago was it installed? If more than a year I would take tap off and flood the valve with a good shot of a cleaning/penetrating solution. If that doesn't work contact Delta!

A:  Perhaps you have hard water. Take apart and soak the ball and socket in CLR.

A:  wd40 then work it back and forth

A:  Dear Dkj402, Thank you for your question. We would be more than happy to assist you with any issues you are having with your Delta faucet. Please call the toll-free Delta Help Line at 1-800-345-3358 between the hours of 7:00 AM to 7:00 PM Monday ~ Friday as well as 9:00 AM to 6:00 PM Saturday EST. You can also contact us via email at customerservice@deltafaucet.com. Best regards, Tanya

A:  yes

A:  yes

A:  Yes. But you need to figure out what connector the faucet has for a sprayer. There are (at least) 2 - one a plastic snap-on square connector and the other a more traditional metal connector. They are NOT compatible with each other.

A:  Dear Sprayer, Thank you for your question. The vegetable/side sprayer assembly of the Delta Foundations Kitchen B4410LF faucet can be purchased separately from the faucet. https://media.deltafaucet.com/PartsDiagram/DPD-K-B1310LF.pdf Best regards, Tanya

A:  Maybe the manufacturer can sell the sprayer by itself.