#1 Home Improvement Retailer

Questions and Answers for Everbilt 3/4 in. x 1 in. x 1/8 in. x 48 in. Aluminum Trim Channel

Internet #204604760

Model #800177

Store SKU #230548

  • Frequently used for harnessing, door frames and wire protection
  • Use a metal saw for cutting to suit your project needs
  • Extremely durable, lightweight and corrosion-resistant

Questions & Answers

57Questions
caret
Q:I have 3/4 inch sande plywood with a 0.035mm sheet of formica on top, will this slide flush over the edge?
by|Jan 8, 2023
1 Answer
Answer This Question

A:  The internal part of the Everbilt 1/16 in. T x 3/4 in. W x 9/16 in. H x 96 in. L Aluminum C-Channel is exactly .75 inch with no further room.

by|Feb 5, 2024
    3 found this answer helpful
    caret
    Q:Can it be used in shower to hold up glass?
    by|Jan 1, 2023
    1 Answer
    Answer This Question

    A:  Yes the profile can be used to secure a shower glass panel. Ideally this alloy is a medium strength alloy and should be able to take the load for the Everbilt 3/8 in. W x 1/2 in. H x 96 in. L Aluminum C-Channel with 1/16 in. Thick.

    by|Jan 10, 2023
      caret
      Q:Can I cut this with a jigsaw with a metal blade ?
      by|Mar 23, 2022
      2 Answers
      Answer This Question

      A:  Yes, a jigsaw with a fine toothed metal blade will cut this soft aluminum. I have also used a hacksaw hand tool with a fine toothed blade.

      by|Apr 1, 2022

        A:  This Everbilt 1/2 in. W x 1/2 in. H x 96 in. L Aluminum C-Channel with 1/16 in. Thick can be cut with a hacksaw blade designed for cutting metal.

        by|Jan 6, 2024
          1 found this answer helpful
          caret
          Q:Do you think this would be strong enough to use as a file rail in a file cabinet? Approx 15.25 inch span from front of file cabinet drawer to rear.
          by|Dec 4, 2021
          1 Answer
          Answer This Question

          A:  This is not a use case that we can offer a recommendation on for the Everbilt 1/16 in. T x 3/4 in. W x 9/16 in. H x 96 in. L Aluminum C-Channel.

          by|Dec 8, 2021
            caret
            Q:Is this strong enough to use under a tabletop to prevent it from sagging?
            by|Oct 28, 2021
            2 Answers
            Answer This Question

            A:  Probably yes, but it depends on how heavy and wide the table. The next thicker size may be better.

            by|Feb 1, 2022

            A:  The Everbilt 3/8 in. W x 1/2 in. H x 48 in. L x 1/16 in. Thick Aluminum Trim Channel can be used for this application. However, a thicker grade is recommended for heavier tables.

            by|Oct 28, 2021
              caret
              Q:I'm not the one that will be picking up the order, can i add the name of the person?
              by|Sep 20, 2021
              1 Answer
              Answer This Question

              A:  Unfortunately we are unable to make updates to customer orders. Please reach out directly to the store regarding your request.

              by|Oct 28, 2023
                caret
                Q:is it safe to assume that the outside dim is 3/4" thus inside dim (opening of c-channel) is 5/8" given material is 1/16"?
                by|Jul 10, 2021
                2 Answers
                Answer This Question

                A:  The inside diameter of the Everbilt 1/16 in. T x 3/4 in. W x 3/4 in. H x 96 in. L Aluminum C-Channel is .77 inch. The outside diameter is .87 inch. Please see the dimension drawing in the group of images on the web page https://www.homedepot.com/p/Everbilt-1-16-in-T-x-3-4-in-W-x-3-4-in-H-x-96-in-L-Aluminum-C-Channel-802667/204274001#overlay

                by|Nov 5, 2023
                  3 found this answer helpful

                  A:  No. The inside dimension is 3/4 inch and the outside dimension is 7/8 inch. 3/4 inside + 1/16 + 1/16 = 7/8 inches. Note that channel dimensions often typically are dimensioned from the inside.

                  by|Nov 5, 2023
                    4 found this answer helpful
                    caret
                    Q:Can this be cut with a hacksaw?
                    by|Jun 1, 2021
                    3 Answers
                    Answer This Question

                    A:  Yes it can

                    by|Jun 2, 2021

                    A:  Hello MB, 1/2 in. W x 1/2 in. H x 96 in. L Aluminum C-Channel with 1/16 in. Thick can be cut with a hacksaw blade designed for cutting metal. Thanks for shopping with the Home Depot

                    by|Aug 31, 2021

                      A:  1/2 in. W x 1/2 in. H x 96 in. L Aluminum C-Channel with 1/16 in. Thick can be cut with a hacksaw blade designed for cutting metal.

                      by|Jun 7, 2021
                        caret
                        Q:Can this be cut with tin snips?
                        by|May 16, 2021
                        2 Answers
                        Answer This Question

                        A:  not easily and not without distortion.

                        by|May 16, 2021

                        A:  We do not recommend using tin snips to cut the Everbilt 3/8 in. W x 1/2 in. H x 96 in. L Aluminum C-Channel with 1/16 in. thick as the finished result may be less than desirable. A hacksaw may be the better tool to use in this case.

                        by|Oct 28, 2023
                          caret
                          Q:Also want hinges to create gate using 4 by 8 Veranda Privacy lattice with.border.
                          by|Apr 9, 2021
                          2 Answers
                          Answer This Question

                          A:  Please see the dimensional drawing provided for the Everbilt 3/8 in. W x 1/2 in. H x 96 in. L Aluminum C-Channel with 1/16 in. Thick for reference to this application. The link is provided here: https://www.homedepot.com/p/Everbilt-3-8-in-W-x-1-2-in-H-x-96-in-L-Aluminum-C-Channel-with-1-16-in-Thick-800547/204273936.

                          by|Apr 13, 2021

                            A:  i did not use it for the purpose you are using it for.

                            by|Dec 15, 2021
                              1 found this answer helpful

                              Frequently Bought Together

                              Top Rated
                              ++
                              Price:
                              $2193

                              Compare Similar Metal Channels

                              current product
                              Top Rated3/4 in. x 1 in. x 1/8 in. x 48 in. Aluminum Trim Channel
                              Top Rated1/2 in. W x 1/2 in. H x 96 in. L Aluminum C-Channel with 1/16 in. Thick2 in. x 36 in. Plain Steel C-Channel Bar with 1/8 in. Thick
                              BrandEverbiltEverbiltEverbilt
                              Name3/4 in. x 1 in. x 1/8 in. x 48 in. Aluminum Trim Channel1/2 in. W x 1/2 in. H x 96 in. L Aluminum C-Channel with 1/16 in. Thick2 in. x 36 in. Plain Steel C-Channel Bar with 1/8 in. Thick
                              Price
                              $2193
                              $1285
                              $2447
                              Ratings
                              (306)
                              (306)
                              (66)
                              Product Length (in.)48 in96 in36 in
                              Product Width (in.)10.5 in2 in
                              Product Thickness (in.)0.125 in0.0625 in0.12 in
                              MaterialAluminumAluminumSteel
                              Production Type OtherHot Rolled
                              View ProductView ProductView Product