Questions and Answers for Everbilt 3/4 in. x 1 in. x 1/8 in. x 48 in. Aluminum Trim Channel

A:  Channel will work well as a top support or guide.

A:  Outer dimension minus the wall thickness x 2. .375 - (.0625 x 2) = .250 inside

A:  0.375 is the inside width

A:  .5x.5. walls are 1/16 thick.

A:  Not exactly. If your requirement is channel then 1/16 is about the thinnest common channel on the market. Home Depot has another product I use for very thin homemade aluminum channel. It is their rolled aluminum flashing. I have hinged two sections of 4 foot angle iron from Home Depot and made a homemade leaf break to fold the aluminum. I hope this helps.

A:  The piece I bought has an interior width of 3/4". If your shelf is plywood or solid wood, be sure to measure the thickness. Solid wood is usually labeled by it's rough thickness and is thinner after planing. Plywood runs about 1/32" thinner than what it's labeled because it's simpler to call it 3/4 than 23/32". The channel will of course fit thinner material, but won't be as snug.

A:  I have the same question -- which hasn't been answered yet. I suspect that 3/4" is the exterior width, not the interior width, so this would NOT fit on a 3/4" shelf. Given that the material is 1/16" thick, the interior dimension would be 5/8". BUT if the interior width is 3/4", I'd like to know about it.

A:  Sure that could do the job

A:  The 3/4" is the INSIDE dimension. I built a bookshelf with this serving as the edging on the 3/4" plywood (which are actually .70", not .75"). Fit perfectly onto the edge.

A:  This should work depending on the thickness of the plywood.

A:  Please check with the ProDesk to see if this size can be special ordered as this is not a size that we currently offer in the store. Thank you for reachingout.

A:  Not sure I can help with this wide of channel if you need it in one piece of metal. That last time I had this requirement I used two aluminum right angle sections and a strip of flat stock to join them into a channel. Waring safety glasses, ear protection and quality gloves, I clamped two metal bars to my router table and trimmed the aluminum flat stock to the proper size. I used a high quality silicon to glue there 3 sections of metal into a channel at the edge of the plywood ramp I built. I painted both the ramp and the aluminum prior to applying the silicon. Home Depot will have all of these items either in the store or online.

A:  This one is 48 inches long.

A:  This aluminum trim channel is 48" in length.

A:  The product label shows 3/4 x 1 x 1/8 (see photo). The actual outside dimensions are 1” x 1” with 1/8” thick walls, the inside dimensions are 3/4” wide x 7/8” tall (see photo).

A:  inside

A:  yes

A:  The 1" is the inside dimension

A:  I am not sure why "Supplier Quality" gave a wrong response - The product label shows 3/4 x 1 x 1/8 (see photo). The actual outside dimensions are 1” x 1” with 1/8” thick walls, the inside dimensions are 3/4” wide x 7/8” tall (see photo).

A:  In stock at the store

A:  Thank you for your recent inquiry with The Home Depot. This item is currently in stock. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376.