Questions and Answers for Glacier Bay Ashland 37 in. W x 19 in. D x 37 in. H Single Sink Freestanding Bath Vanity in Chocolate with White Cultured Marble Top

A:  Yes, but the countertop is loose. Check the countertop carefully as ours came cracked underneath that didn't get spotted until install time. It took weeks to get a replacement rendering the bathroom unusable during that time!

A:  Hello Thomas, Thank you kindly for your question. Yes, we are happy to report that the vanity cabinet is pre-assembled. We hope this helps. Best Regards

A:  Yes it comes assembled.

A:  You have to screw on very bottom of keg. Attach sink top. Attach knobs. 

A:  Yes

A:  Hello David, Thank you for your question. We are happy to report that the distance from the floor to the bottom of the lower drawer is roughly 28.48 in. H. We hope this detail is helpful. Best Regards

A:  Pull the drawers out completely. Look at the rails on both sides you will see a small plastic lever. Press the levers down which will allow you to remove the drawers.

A:  Hello Dennis, Thank you for your question. We can confirm that in order to remove the drawers you would first have to fully extend the drawers and identify the black clips (they look like toothpicks) located inside of the glide. Once identified, you will position the right slide spring clip downward (towards the floor) and the left slide spring clip upward (towards the ceiling). Once both spring clips are held in the indicated position, you should be able to pull the drawers straight out. Re-installation is also easy, all you would have to do is slide the drawers right back into the cabinet/glides. If you have any further questions or concerns regarding the process, our best recommendation would be for you to print or save a copy of the step by step guide referenced in the installation guide (under the Additional Resources section) or by visiting the direct link https://images.thdstatic.com/catalog/pdfImages/ab/ab5529d4-1dbb-4b23-a878-44dc563dedcc.pdf here. We hope this information is helpful to you. Best Regards.

A:  Hello Bill, Thank you for your inquiry. We can confirm that in order to remove the drawers you would first have to fully extend the drawer and identify the black clips (they look like toothpicks) located inside of the glide. Once identified, you will position the right slide spring clip downward (towards the floor) and the left slide spring clip upward (towards the ceiling). Once both spring clips are held in the indicated position, you should be able to pull the drawer straight out. Re-installation is also easy, all you would have to do is slide the drawer right back into the cabinet/glides. For a copy of the generalized instructions, you may click on the direct link https://images.thdstatic.com/catalog/pdfImages/5c/5c88f14b-5101-4df5-b2d2-7d667b911dc3.pdf here. We hope this information is useful to you! Best Regards

A:  Hello Dinna, Thank you for your question. We do not offer a matching backsplash or sidesplash for the Ashland vanity. We apologize for the inconvenience, but hope this information is helpful to you. Best Regards

A:  Hello Bonni, Thank you for your question. For questions concerning the price, we best recommend consulting with the Home Depot Customer Service team. You may reach out to the Home Depot Customer Service team by calling 1 (800) 466-3337. Best Regards.

A:  Hello Maggie, Thank you for your question. No, the vanity cabinet is not sold separately from the vanity top. We apologize for the inconvenience, but hope this information is helpful to you. Best Regards

A:  No it does not.  We used tile

A:  No it doesn't appear to have a matching backsplash.

A:  Hello Brian, Thank you for your question. We can confirm that we do not manufacture a matching backsplash (or sidesplash) that is made specifically for the 36.7 in. Ashland vanity top. Our best recommendation would be for you to consult with your local Home Depot Bath team for splash alternatives that best fits your home decor, such as mosaic tile. Best Regards.

A:  Hello Jonathan, Thank you for your question. We apologize but we do not have the paint codes to our vanities. We apologize for the inconvenience. Best Regards

A:  The distance from floor to bottom of the shelf is 7", to the top of the shelf is approx. 8.5". Please keep in mind that there are leveler glides inserted into the legs which you can extend by approx. 1/2"

A:  Hello Lori, Thank you for your question. The measurement from the floor to the bottom of the shelf is approximately 6.99 in. H. We hope this information is helpful. Best regards