Questions and Answers for Hampton Bay 1-Light Oil Rubbed Bronze Sconce with Frosted Opal Glass Shade

A:  No, this has to be hardwired. You could buy your own plug kit to add a plug to it.

A:  No. It is hard-wired.

A:  No, hard wire permanent mount.

A:  No, it is a light fixture that has to be wired into home.

A:  No. This is a wall sconce which is wired and turned on with a wall switch

A:  No. Hard wired.

A:  No, it is hard wired.

A:  The scone can be installed either with light going up or installed with light going down. This scone does not swivel.

A:  No, this model does not swivel.

A:  You can mount it with the shade pointing up or down, but once mounted, it doesn’t swivel.

A:  No but it can be installed globe up or down.

A:  No.

A:  No. This is a fixed position, and it illuminates the whole room. We really love these fixtures. We used 5 in our home.

A:  No it's fixed.

A:  No. There isn't any movable collar on this light. It is stationary. Also, someone said that it can be mounted in either direction, however, if mounted facing down you can't use the glass cover because there isn't anything to hold it in place so, realistically, it can only be mounted facing up.

A:  yes I have 2 I use them as reading lites

A:  I have two on one switch and they work fine. I can turn one or both on/off as needed.

A:  Yes

A:  Yes and I really like it. It helped update my bathroom.

A:  I have the single globe as pictured. Very pleased with how it looks where it’s mounted and the light it provides.

A:  It's glass.

A:  The sconce in this particular model is glass. I don't know if there's a plastic alternative.

A:  No

A:  yes

A:  This is metal and glass. You might need to call your local Home Depot for that question.

A:  8 3/4" high to the top of the glass. 5" wide across the top of the glass

A:  The dimensions are: Depth (in.) 6.25 Height (in.) 8.13 Width (in.) 5

A:  It's 4-3/4".

A:  The diameter is 5inches.

A:  About 4 and one-half inches

A:  It is made to fit over a 4" J box or a receptacle box.

A:  5 inches.

A:  There is a threaded ring.

A:  I don't think so.

A:  No, but you shouldn't need one. Just use your fingers to hand tighten.

A:  I did not see a tool in the box. It helps to have a small hand (unlike mine).

A:  No, there is a tool for the ring that holds the glass in place around the bulb.

A:  The base diamiter is 4.5 inches.

A:  The base diameter is about 4 1/2 inches.

A:  The home depot sells different types of glass.

A:  There is no way to know this short of contacting the manufacturer. Look on the box, get the info and google them is my best bet. Hope this helps.

A:  Probably not, but you could go on the mfg web site and ask customer service. I have not seen any different globes for these lamps.

A:  this has a standard size base, so you can order similarly sized glass. Take the fixture to check the fit.

A:  That's the way I mounted it. No problems so far.

A:  Yes, I installed mine with the globe pointing down to get more light. it works just fine. Just make sure the globe retaining screws are tight against the globe so the globe doesn't slip out.

A:  Actually, that is exactly how I installed mine. I tried it both ways and like globe down the best. Enjoy

A:  Yes, I did this. But I also used LED bulbs which give off lower heat. Bulbs installed base up transmit heat into the fixture so you need to be careful when using high watt incandescent bulbs.

A:  Yes! It can. Just make sure an electrician does the work. I had mine done in March. It is bright and looks beautiful an a light going up my staircase.