Questions and Answers for Impact Plus 144 in. x 80 in. Mir-Mel White Mirror Solid Core MDF Interior Closet Sliding Door with Chrome Trim

A:  DIY, You can have about a 1/2" shorter and about 3/4" taller opening than the door you are asking about. So in other words if your opening is 79 1/2" to 80 3/4" you will be OK. On the width as long as it is smaller than 72" or at the very widest 72 3/8" you should be OK too. In the smaller opening, your door panels would just overlap a little more than normal when the doors are closed. Any more than a few inches shorter will still work but more than a few and you are interfering with closet access when they are open and a lot of overlap. Thank you.

A:  No, the doors cannot be top mounted.

A:  Kirk, No they unfortunately ours cannot. There are other options out there with other manufacturers so you will be able to accomplish what you are looking to do, just not with our stuff. Thank you.

A:  I would suggest calling the manufacturer. We found them to be very helpful when we had issues. They build the triple doors on demand. Just in time manufacturing and even though it might not be a offering from Home Depot I believe they can create a pricing for you and Home Depot can order the basic three doors and the mfg. can change the door configuration when they build the doors. Be sure to order the triple track sliders from the mfg. sonce that is not offered by Home Depot.

A:  Cal, YES you can and it's a great option. Please call us at 631-414-7725 or email at sales@paniflex.com and our customer service team will talk you through your options. Thank you. Carlos

A:  Cutting is not necessary, the doors will over lap. Mike

A:  Cm, We don't recommend cutting since the door has a finished edge and you will void your warranty. You can use the 72" door as long as your height is 80" you will just have a little extra overlap of the panels when it is completely closed. Thank you.

A:  maris, I'm not sure what you are referring to but none of our options show or are available as clear glass. Any thing that looks like is simply due to the limitations in the photography that is shown online. The mirrors are mounted to the face of the MDF panels, these are not true stile and rail doors which you can see through. Thank you.

A:  Rico, Unfortunately no. Our hardware is patented and not designed to work like universal hardware. Our panels and hardware are a system that work together. You can purchase universal hardware kits made for standard doors at your local Home Depot or HomeDepot.com. Thank you

A:  Zoe, No these are sliding doors that come complete with all tracks and hardware for installation. Slab doors are simply any regular door without the hinges and frame attached. If it has hinges and frame attached then it is a "pre-hung" door. Good luck I hope this helped. Thank you.

A:  No, this product can not be trimmed.

A:  llia, our doors will not operate without the bottom track. The top track is more of a guide and the bottom track is what bears the weight. Rollers on the bottom of the panels make contact and roll on rails on the bottom track. If you do go with our doors with the bottom track, In addition, we do not recommend trimming the bottom of our doors as you will cut off the finished edge. It can be done but you will void any warranty and you will also need to remove and re-mount the bottom rollers. Thank you.

A:  Linda B, There are small finger-pulls that are drilled into the face of each door. There is a picture of them with the product online. They are not on the edges of the doors. You can give us a call at 631-414-7725 and we can supply you with additional finger-pulls if that is what you'd like. You can either purchase them and have us supply them and you can install them on site or call us after you place your order with your order number and you can purchase the extra and we can install them for you. Thank you.

A:  Silvia, We don't recommend cutting them down as there are preps in the edges of the panels that will need to be re-created and you will have exposed edges. Better option is to call us at 631-414-7725 reach out at sales@paniflex.como and we can quote you a custom size. Thank you.