Dear Rudy, The 200 ohm register on this meter is just to the left of the battery check on the dial or exactly at the bottom most setting directly above the COM port. Happy resisting. Sincerely, hamrdul
Yes, it has a 200 ohm setting, 6 o'clock on the dial.
You will need to dial your meter from the off position (twelve o'clock) to the bottom of the dial (six o'clock). Ohms ranges on a meter are indicated by the Greek alphabet letter for Omega. It looks like two stick feet under an upside down letter " U."
To measure less than 200 ohms, the meter needs to be in the 200 ohm setting. To measure more than 200 ohms, the meter needs to be in the 2K ohm setting.
On mine, the 200 ohm range is at the 6 o'clock position on the selector dial.
Not sure I understand the question, but the 200 Ohm range is set by putting the switch pointing directly "down" opposite the OFF position.
The resistance Ranges start at the six o'clock point and go counterclockwise to almost the 9 o'clock position. The first position is the 0-200 ohm Range then the 0-2k ohm range then the 0-20k ohm range then the 0-200k ohm range then the 0-2 Meg ohm range.
I ment clockwise.
