Q:Home Depot website says accommodates 4 or 8" center, but Mustee website says 4" only. Which is it?
by|Sep 8, 2020
3 Answers
Answer This Question
A: I have the model# 19 and it is 4" center only.
by|Oct 13, 2021
1 found this answer helpful
A: It’s 4” only.
by|Sep 11, 2020
A: Mustee offers two 18" wide laundry tubs. The model 12 Utilatub only handles a 4" center set faucet. The model # 21F Utilatub will handle a 4" or 8" center set faucet.
by|Mar 1, 2024
3 found this answer helpful
Q:What do I need to buy for this to drain into a garden hose?
by|Jul 1, 2020
2 Answers
Answer This Question
A: You are going to need an adapter to fit onto the pipe coming from the sink. However, I’m jot even sure if there is one.
by|Jul 5, 2020
A: The drain takes a standard 1 1/2" P-trap. The reducer you find has to be connected with a similar size fitting and thread
by|Jul 6, 2020
Q:How can I get a gray leg for my utilitub model18
by|May 15, 2020
2 Answers
Answer This Question
A: I just looked at Mustee’s website. They don’t sell legs separately. I would return it to Home Depot or buy a new one.
by|May 20, 2020
A: Part # 18.300F is the floor mounting kit for the 18F laundry tub which includes 4 legs and levlers.
by|Mar 4, 2023
1 found this answer helpful
Q:What size trap and pipe do i need? 1 1/2 or 1 1/4
by|Apr 15, 2020
1 Answer
Answer This Question
A: 1 1/2”
by|Apr 19, 2020
Q:I checked the product dimensions but didn't see anything about the angle from top of sink to bottom of feet
by|Jan 31, 2020
2 Answers
Answer This Question
A: The sink is 18” x 30”. It narrows to 14 1/4” x 17 1/2” at the floor.
by|Feb 6, 2020
A: I measured the footprint as 14 1/4” x 17 /12”. I took a picture so that you could get a better idea.
by|Feb 6, 2020
Q:i want to use this in my garage - but because of car space, i would like to turn it so from wall out it is 18". Is there any problem with doing this?
I figure I could have a wall mounted faucet or just a faucet on the side.
by|May 22, 2019
3 Answers
Answer This Question
A: That should not be a problem.
by|May 22, 2019
A: No problem. The sink lis freestanding. The shelf (in back) is meant for faucet mounting, but a wall mount would work.
by|May 26, 2019
A: I don’t see how it wouldn’t work. My faucet comes out of the wall. Keep in mind though, that the part that is supposed to be where the faucet is will now be on the side for you.
by|May 24, 2019
Q:What is the distance between the bottom of the legs when assembled?
by|Apr 29, 2019
4 Answers
Answer This Question
A: They are 14 x 18.
by|May 2, 2019
A: Left to right approx 13". Front to back approx 17".
by|Jan 6, 2020
1 found this answer helpful
A: Its about 19" it can vary slightly because at the bottom of the legs there is some adjustment possiable
by|Mar 3, 2020
1 found this answer helpful
A: 14 1/4” x 171/2
by|Nov 23, 2020
2 found this answer helpful
Q:just want to be sure the sink can handle the amount of water draining from the washer
by|Mar 13, 2019
2 Answers
Answer This Question
A: I use mine to drain the washer and have never had a problem
by|Oct 29, 2019
A: The 21CP Utilatub can hold 16 gallons of water and drains out to a standard 1 1/2" P-trap. Just make sure the drain area does not get clogged with lint to reduce the flow
by|Mar 14, 2019
Q:A previous tub was mounted in the same location. The drill holes for the footings are located at a width of 12" and a length of 14". What is the foot print for this tub? Will the legs on this tub align with the existing drill holes?
by|Feb 25, 2019
2 Answers
Answer This Question
A: These are approx. 14" wide and 18" deep.
by|Feb 27, 2019
A: I didn’t attach mine to the floor.
by|Feb 28, 2019
Q:Does it come with a stopper?
by|Jan 1, 2019
5 Answers
Answer This Question
A: Yes, should be included.
by|Jan 3, 2019
1 found this answer helpful
A: If you refer to the drain plug, then yes
by|Jan 3, 2019
1 found this answer helpful
A: No. You will need to provide all of the plumbing connections.