Questions and Answers for Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Gen II 18-Gauge Brad Nailer with 8.0 Ah Battery and Rapid Charger

A:  I use the 18ga For trim and door stops. The 18ga brad nails leaves a smaller hole, does real well on not spliting delicate or small trim pieces. Hope this helps.

A:  This tool is adequate for trimwork. I personally would not install door jams with this tool, But I am not a professional carpenter. 

A:  I use the 18G with 1 1/2-2” nails daily to custom build doors. Great gun and no annoying compressor or hoses to mess with

A:  Hello! 18 Gauge Brad Nailers are used to install baseboard, window & door casing, crown molding, decorative trim, and other light wood construction applications.

A:  The nailer will accept all 18 gauge Brad Nails between 5/8th"- 2 1/8" in length.

A:  Hi Jonathan, the runtime with a CP 2.0 battery is 1500 nails per charge.

A:  Any 2.0 will shoot 100 nails easy

A:  Yes, it will work with all M18 batteries. In my experience, the smaller the better just to keep weight down

A:  Hello! All of our M18 batteries are compatible with all of our M18 products.

A:  No oil and you are getting jams use porta cable nails. They don't shoot any coated nails in. galvanized

A:  No oil needed

A:  No

A:  Yes

A:  Hi Doug, yes there are replacement tips available. Please call us at 1-800-SAWDUST for assistance.

A:  Hi Brady, the 8Ah battery will work on your 10" miter saw. For optimal performance, we would recommend a 12 AH battery.

A:  Hi Ozzy, yes you will be able to use the same battery from your cordless drill on your Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Gen II 18-Gauge Brad Nailer.

A:  no

A:  I typically use larger nails for fencing. But I guess it can help with small fence work.

A:  Tool only is just that, tool only. If you want a case you should buy the kit....model number ends in 21 not 20.

A:  Only the kit that comes with a charger has a carrying bag. Agree with you though