Questions and Answers for Mold Armor 64 oz. E-Z House Wash Mold Killer with Hose-End Adapter

A:  Right to the hose.

A:  Les - Mold Armor E-Z House Wash can be attached to the hose and used easily from the container. Move the indicator on the nozzle to rinse for plain water to wet the surrounding landscaping before and after applying the product. The surface to be cleaned should be dry. Put the nozzle indicator in the clean position when ready and turn on the water to apply the product. Work from the bottom up and work in sections. Do not allow the product to dry on the surface or leave on more than 10 minutes. If a second application is needed, wait until the first application has been rinsed and completely dried before applying again.

A:  Yes, it just attaches to your regular garden hose.

A:  Just attach a hose and turn the bottle thumb switch to either "wash" or "water". Easy .

A:  It attaches to a hose

A:  Yes, it would be easy to by the gallon size and then refill the 64 oz. sprayer bottle.

A:  Yes

A:  Yes it is refillable.

A:  I would not let the canine drink it or lick it or get in the eyes. Put the dog inside.

A:  Pets should be clear of the area until you rinse.

A:  No

A:  Depends on how far the furniture has risen. I'd say no over 20 feet.

A:  yes

A:  Hi M6a9. Thank you for your question. According to the manufacturer’s description of “Mold Armor 64 oz. House Wash Hose End Sprayer Mold and Mildew Remover”, it can be used on Siding, PVC, Aluminum, Plastic among other items. https://www.homedepot.com/p/Mold-Armor-64-oz-House-Wash-Hose-End-Sprayer-Mold-and-Mildew-Remover-FG51164/301530684#overlay Please let us know if we can be of further assistance. Rick_HD_OC

A:  M6a9 - Mold Armor 64 oz. House Wash Hose End Sprayer Mold and Mildew Remover could cause discoloration or damage to resin, especially if left on too long or allowed to dry on the surface. Always test first in a small inconspicuous spot. and follow all instructions on the label carefully. If you have additional questions, please contact a Mold Armor expert at 1-844-969-1373.

A:  Kg - Mold Armor E-Z House Wash can be used on composite surfaces. It should not be left on more than 10 minutes and should not be allowed to dry on the surface. Always test first on a small, inconspicuous surface. For more details, please contact a Mold Armor expert at 1-844-969-1373.

A:  Yes, this is very easy and works great.

A:  Yes, just spray it on. It might take more that one application to get you siding clean.

A:  Easy. I also am a female and had no trouble with this product. Just do small sections at a time and keep the siding wet. Good luck.

A:  Very easy to use, we have used it on vinyl siding also on headstones at our family cemetery.

A:  Yes, just spray it on. It might take more than one application.

A:  Yes

A:  Sally, This product is toxic to fish and aquatic organisms. To protect the environment, do not allow pesticide to enter or run off into storm drains, ditches, or surface waters. Read all instructions, note where it shows on the label and safety precautions on the label before use. Always test products first in a small, inconspicuous spot. Feel free to call our Mold Armor helpline at 1-844-969-1374 whenever you have questions about our products.

A:  yes

A:  Nope, didn't seem to effect my grass.

A:  I just covered my bushes and rinsed them when I was done

A:  Sure.

A:  I have heard that bleach is not good for vinyl, this has no bleach.

A:  Not all bleach is created equal. My vinyl is fine.

A:  I cannot answer that question. I would suggest you contact Mold Armor about same and get the answer straight from the company.

A:  Maureen - Mold Armor E-Z House wash can be safely used on painted aluminum when used according to the directions on the label. It should be applied to a dry surface, not in the hottest part of the day, and rinsed within 10 minutes, not allowing it to dry on the surface. Always test any product on a small spot or a sample surface similar to the intended use before applying to the entire area. Read all label instructions and follow safety guidelines. Feel free to call our Mold Armor helpline at 1-844-969-1374 whenever you have questions about our products.

A:  unsure