Questions and Answers for Summit Appliance 0.9 cu. ft. Built-In Microwave in Stainless Steel

A:  No, the cutout minimum for this unit is 22" W (as the unit measures 19" in width) x 16.2" D.

A:  Jann, I haven't figured this out either. Our current opening is 15" high x 25" wide and I've had trouble finding one that the trim kit doesn't touch my upper and lower cabinets at 18". If I figure it out- I'll share with you. : (

A:  The handle is 8.25" long, with a diameter of .625". We hope this helps!

A:  It should, depending on the size of your plates. The turntable has a 10.5" diameter. Hope this helps!

A:  The trim kit is cosmetic, but as the sides, rear, and top are unfinished, it is recommended that this microwave be installed in a built-in application. The actual microwave dimensions (sans trim kit) are 12.125" H x 19" W x 13.75" D.

A:  Almost. The width is perfect. Your cutout height is a little taller than we recommend (13.8"). When the microwave is installed and the collar added, the overall height will be 15 1/8", so you may have a 7/8" gap.

A:  Not quite. The trim kit over the microwave is 23 3/8" W (which would cover your space) and 15 1/8" H, which sounds about 2" short. You may have to find another solution for covering the full height.

A:  Yes. I put mine in a standard size drawer cabinet. I took out the top two drawers and removed the cross bar. It isn’t as deep as a standard 24” cabinet so pletnty of room for venting but you can’t put it behind a cabinet door as the front has to have airflow. 

A:  Yes, this microwave is designed to be installed inside a cabinet sized at 13.8" H x 22" W x 16.2" D. If you have additional questions about the installation, please feel free to contact our technical support team at 718-893-3900.

A:  The microwave on its own exhausts at the top, but when installed with the included grill, the air is pushed out front. We hope this answers your question, but if you need more information, feel free to call our team at 718-893-3900.