A: I have an 11' by 13' pergola and with some overlapping to ensure that the overlap area was sitting on a 2"x2" brace..I needed 21 panels. My 11' length had an extra 18" header on each side so it was really 14'. I used 3 panels for each run to avoid cutting
A: Hi Jenna, Please use our DIY roofing calendar to determine an estimate of how many panels you will need for your DIY project. It can be found under Palram's website under the "resources" tab at the top, then clicking on "DIY Roofing Calculator."
A: Hi Karen, Yes our Suntuf panels can be installed against existing brick, block, or masonry walls. Please refer to our Suntuf installation guide for more details.
A: Hi Bruce, Yes our Suntuf panels can be installed over plywood.
A: Ultraviolet lights are not needed for plants to grow
A: Hello! Our Sea Green panels have an 80% Light transmission.
A: Hi Dana, Yes, our Suntuf panels can be cut using manual or power tools. Circular saws will provide the best results for straight long cuts.
A: Hello, Please speak to a Home Depot associate to place a special order that is specific to the larger dimensions that you need for your project.
A: Hi Shari, The light transmission of our Sky Blue panels is 55%. To view all of the light transmissions for our panels, please visit the following link and scroll down about halfway through the page. https://www.palram.com/us/product/suntuf-diy-polycarbonate-corrugated-sheets/