Q:how do i tell you whether i need 2 additional holes at 4" or 8" spacing?
by|Apr 4, 2021
1 Answer
Answer This Question
A: Good morning Alan,
Thank you for choosing Swan at American Bath Group.
All of our sinks come with 1 pre-drilled hole. Optional locations for additional holes are located on the underside of the sink using marks (4" and 8") which are cast into the sink. You will need to pre-drill holes that fit the requirements of your sink faucet or other accessories.
Thanks!
Trista-Swan CC Team Lead
by|Apr 6, 2021
Q:the vanity is 42" wide.. will this 43" vanity top be ok?
by|Mar 18, 2021
3 Answers
Answer This Question
A: Yes. This allows for a slight overhanging of the top on the cabinet. The cabinet depth should be 21” for the correct overhang on the front (22”).
by|Jul 24, 2021
1 found this answer helpful
A: We put ours on a 42" cabinet and it's perfect, but you could probably shave it down on both sides. I would say it's intentionally a little wider because you want the slight overhang. Maybe peek at an existing vanity/cabinet setup in your house to verify.
by|Mar 18, 2021
A: If one side is against a wall it will leave an ok overhang, otherwise you'd want it wider.
by|Aug 4, 2021
Q:Can I get this made in custom lengths?
by|Mar 14, 2021
1 Answer
Answer This Question
A: Yes, we have a custom vanity tool on our website, under the tools tab.
by|Feb 5, 2024
Q:Can I get samples of other colors?
by|Feb 15, 2021
1 Answer
Answer This Question
A: Hello,
Thank you for choosing Swan. We appreciate your interest in the color samples for the Swan Contour 49 in. W x 22 in. D Solid Surface Vanity Top with Sink in Ice @ The Home Depot. This vanity top comes in the colors Ice, Gray, Tahiti Gray, Night Sky, White, Bisque, Tahiti Sand, Baby's Breath, Bone, Tahiti Matrix, Tahiti Ivory and Barley. Samples of these colors can be found on our website and are available to order. To view the color samples, visit Swanstone.com, go to the "Collections and Finishes" tab, under "Collections" select "Swanstone." Scroll to the bottom of the page and select "Purchase Swanstone Samples." Once you select that, you will be able to view the Swanstone colors and purchase samples.
If you have any questions, please don't hesitate to reach out to our customer care department. Methods of reaching us can be found on our website. Best, Swan Customer Care
by|Feb 15, 2021
Q:Where can a purchase the sidesplash in ice? I haven’t found a source online.
by|Jan 31, 2021
1 Answer
Answer This Question
A: Thank you for your recent inquiry with The Home Depot. Thank you for bringing this to our attention. Swan customer service can be reached by phone at 1-800-325-7008. We have requested the side plash is listed on HomeDepot.com and referenced on the product page for this vanity top. We appreciate your business and look forward to serving you in the future.
by|Feb 23, 2021
Q:When our vanity top arrived, it has no hole at all for a faucet. Is this how it’s supposed to come? We were expecting a center hole based on the description. What is the best way to drill the hole?
by|Jan 14, 2021
3 Answers
Answer This Question
A: Yes, it came with one hole. There are point on the vanity for any additional holes.
by|Jan 18, 2021
A: Yes, it comes that way because all faucets are not the same. Some require one hole for instalatioon and others require three.
by|Jan 16, 2021
A: I'm 98.5% sure ours had the one faucet hole and then the plumber asked to see which faucet we'd purchased to know if he needed to drill the additional holes.
by|Jan 15, 2021
Q:I just purchased and install the sink. As much as I like the shape of the sink, I have one concern that there is no lip (sorry dont know how to call it) at the side of the sink, so water run off, dripping over vanity and down on the floor or my feet while washing face. Do you have any product suggestions to over come this issue? Thank you
by|Dec 7, 2020
1 Answer
Answer This Question
A: Good Afternoon
We’re so sorry that your experience did not match your expectations. Please help us to improve by providing more information on your experience. Please provide photos of the sink so that we can get a better look at what is going on. Please send this information to us at help@swanstone.com and we will be happy to further assist.
Thank you
by|Dec 8, 2020
Q:Is the backsplash 2” or 3” high?
by|Nov 2, 2020
2 Answers
Answer This Question
A: It is 3" high
by|Feb 17, 2021
A: Good Afternoon Debi,
Thank you for contacting us. The backsplash is 3" . Should you have any further questions, feel free to contact us at help@swanstone.com
by|Nov 2, 2020
Q:Is this available in Tundra or Ice? Model numbers please. Thank you
by|Oct 4, 2020
1 Answer
Answer This Question
A: Good Morning Eric,
Thank you for contacting us, and thank you for choosing Swan. In regards to your questions, the Model # is CV-2237 and the part # you would use is, CV2237.XXX ...the XXX's are for the color codes. Color Tundra is 131 and Ice is 130. If you should have any other questions, feel free to contact us back.
Thanks you,
Michelle Hudgens
Customer Account Analyst
by|Oct 5, 2020
Q:What size sink drain should be bought to fit the drain hole?