Questions and Answers for Varathane 1 qt. Golden Oak Classic Wood Interior Stain

A:  We're happy to help, Ryan. Yes, Rust-Oleum Zinsser Seal Coat Sanding Sealer can be applied after our Rust-Oleum Varathane Classic Wood Stain. We recommend allowing the stain to fully cure for at least 3 days before applying Seal Coat. -Rust-Oleum Product Support 14

A:  We're happy to help, Tom. Rust-Oleum Varathane Classic Wood Stain needs to be applied to bare wood only in order to properly penetrate the pores of the wood. Applying a sealer would hinder the penetration process and leave a tacky finish on the surface. To help the stain get a more even finish we recommend first applying our Rust-Oleum Varathane Wood Conditioner. https://www.homedepot.com/p/Varathane-8-Ounce-Wood-Conditioner-4-Pack-342085/305594944 -Rust-Oleum Product Support 14

A:  We're happy to help, Joel. To help rejuvenate your Rust-Oleum Classic Red Mahogany Wood Stained areas we recommend lightly sanding the surface to reopen the pores of the wood and then reapplying the wood stain. -Rust-Oleum Product Support 14

A:  We're here to help! A tacky or sticky surface is likely indicator that all the excess stain was not wiped away from the surface. To remove the tacky Rust-Oleum Varathane Classic Wood Stain, you will need to wipe and buff the surface with clean rags and some mineral spirits. - Rust-Oleum Product Support 3

A:  We're happy to clear things up. This listing is for 2 quarts of Rust-Oleum Varathane Classic Wood Stain. -Rust-Oleum Product Support 14

A:  Oh no, Nicole, let's see if we can help. If Rust-Oleum Varathane Classic Wood Stain is leaving a tacky finish that typically means not all excess stain was removed. To remove the excess we recommend taking a rag lightly dampened with mineral spirits and wiping down the surface. -Rust-Oleum Product Support 14

A:  We need to gather more details to get to the bottom of this! Please give us a call at 800-901-0411 to talk with us further about your experinece with Rust-Oleum Varathane Classic Wood Stain. - Rust-Oleum Product Support 3

A:  We're happy to help, Grant. Yes, Rust-Oleum Varathane Classic Natural Wood Stain can be applied with to give a lighter tone to your wood. Be sure to sand the surface before applying to reopen the pores, so the stain can properly penetrate. -Rust-Oleum Product Support 14

A:  We're happy to help, Dan. Rust-Oleum Varathane Classic Natural Wood Stain will still alter the color of your wood and help give it a richer finish. We also do not recommend applying the wood conditioner without applying a stain after. Please also note applying these stains to a butcher block countertop will make the surface no longer a food safe surface. -Rust-Oleum Product Support 14

A:  We're happy to help, Donny. Rust-Oleum Varathane Classic Wood Stain can only be applied to bare wood surfaces as it needs to penetrate into the pores of the wood. A finish on the wood will hinder the penetration of the stain and leave a tacky finish on the surface. -Rust-Oleum Product Support 14