#1 Home Improvement Retailer

Customer Reviews for Everbilt 1-1/2 in. Zinc-Plated Corner Brace (4-Pack)

Internet #202033892

Model #15304

Store SKU #339563

  • Versatile reinforcement brace for all types of wood projects
  • Countersunk hole design allows screws to sit flush
  • Right-angle brace with rust-resistant zinc plated finish

Customer Reviews

  • 4.7
    out of 2,422 reviews
  • 93% recommend this product
Filter by:
Showing 1-30 of 2,422 reviews
Useful in many tasks inside or outside.
I'm reviewing. Everbilt 1-1/2 in. stainless steel corner brace (40 pack). I got these for odd uses around my house. As far as I can tell These are made of 316 grade stainless steel. They are generally not magnetic at all. If they were a lesser grade like 302 or 304, they would be magnetic to some degree. Legs are a 1-1/2 in. long by 1/2 in. wide. They don't have gussets in the corner, but being 316 stainless at .068 thick. They don't really need it. 316 stainless is used in many food service items and some medical devices. They shouldn't rust when used inside or outside or in most harsh environments.
by
  • Recommended
These are quite strong corner brace's.
In review of this "Everbilt 3 in. Zinc-plated corner brace (40 pack). These are fairly heavy duty in the specifications on the HD site it shows .060 thick these actually measured .096 thick. The package came with 5/8" long number 8 flathead Philips drive screws to install on wood surfaces. They are very rugged can be used for many types of uses. The zinc plating should keep them rust free for a few years outside and most likely forever used Inside. legs are 3/4 in. wide.
by
  • Recommended
Very rigid
These are great quality corner brackets, or braces. They are very rigid and they are zinc coated so they should withstand rust for a while. This package comes with all of the screws. You would need to install all 40 of the braces in the package. Each brace is about an eighth of an inch thick and they are 4 inches long on each end. The supplied screws are Phillips head.
by
  • Recommended
Stainless Steel
The Everbilt 1.5" Stainless Steel Corner Brace (40-pack), Silver can be used for a varity of projects, or jobs around the house, and yard. I wanted to make planter boxes to hold some pots of flowers for the summer. I made the boxes out of PVC boards. I was able to make them without any visiable nail holes on the outside. I plan on adding some trim to the top to finish them off. The braces are a sturdy stainless steel. All the screws were supplied. The best part are all the colors/finishes offered by Everbilt.
by
  • Recommended
Small brackets suitable for small projects
I got this to prop up some bookshelves and to provide extra support. The brackets come with screws and are simple to install. I predrilled holes with a drill and then put up the brackets under my shelf. You can fasten both the sides and the shelf itself to the bracket, or you could leave the shelf floating on the bracket, depending on your application. Because I was using this for moveable shelves, I didn't use the top screw. The result is more sturdy and these fit the bill for my needs.
by
  • Recommended
Nice to have in your kit, comes in very handy
These corner braces offer an easy way of reinforcing right-angle intersections. The fastener holes are countersunk, so the screws can sit flush with the surface of the brace. Speaking of the screws - you might want to consider using a bit longer fastener than those that come with the package, depending on what you’re reinforcing. I used the braces to help secure some garden borders I built out of standard 2x4’s, and used longer screws; I just felt that more is better in this application. The zinc plating on the screws offers some rust resistance - but for outdoors use you might want to consider using galvanized or stainless steel fasteners. In my application I’m not concerned with rust, but YMMV. The braces themselves are designed for going on the inside of the 90 degree joint - putting them on the outside will result in a poor fit because there’s a reinforced bit right in the middle of the 90 corner of the brace (see photo) that gets in the way of a smooth fit. Of course you can, perhaps, remove enough material from the application (as in cutting a groove my 2x4’s) to allow the brace to fit snugly. You’re not limited to a 90-degree brace function - you can use machine screws to connect two braces together, thus getting a “U-Joint” - see attached photo. I’ve used this configuration to mount one side of the joint to a wall, and then hung an extension cord on the “U”. Works pretty well. Note that the counter-sink configuration of the holes doesn’t lend itself to using machine screws and nuts; I used appropriate washers and split washers to help secure the connection. YMMV. Fit and finish of the braces and screws is very good. These are handy bits to have in your parts bin.
by
  • Recommended
We Keep Them Handy
This is a standard zinc plated 2" inside corner brace, handy for a wide range of applications and projects. Thickness is a bit heavier than 1/16" (2mm) and all edges are chamfered with a single stamped gusset at the bend. The plated 3/4" wood screws will finish countersunk in the brace. They are surprisingly stout and will resist deformation. Depending on the attachment material, longer screws will add strength. We keep them around because we use them routinely in both wood and metal projects.
by
  • Recommended
Easy to use and super strong
This 40 pack and Everbuilt 3 inch galvanized corner braces is a must have for any professional or DIY’er. Perfect for reinforcing wood on indoor and outdoor projects. Measures 3 inches long and about 3/4 inch wide. Built in gusset reinforcement for strength. Has 4 pre drilled counter sunk holes for a flush design and comes with the screws. Galvanized finish makes a rust and corrosion resistant. Definitely recommend for its ease of installation and wide application use.
by
  • Recommended
40 pack 2-inch braces
So what’s better than having one two- inch “L” brace? How about a box of forty of them. Of all the screws, bolts, knobs, etc. that I have held onto over the years I always seem to need an L brace. Whether for hanging shelves, connecting boards, or reinforcing anything that attaches to wood or metal these are a must have for everyone’s tool box or work bench. This pack comes with all the L braces, plus multiple bags of screws. I highly recommend getting these.
by
  • Recommended
Well made. Super strong. Can be painted.
by
  • Verified Purchase
Strong brace!
This brace is very strong and well machined with all corners and edges tumble polished, so that there are no sharp edges. Additionally, this also help with the zinc plating which makes those corner braces rustproof as well as safe to handle and install. Material thickness seems 18 ga steel (0.516" or 1.31mm) which paired with the provided screws makes loadbearing capacity well overengineered for the normal applications for this brace. The provided screws are also zinc galvanized, and although not stainless, have very good rustproofing It's a great product with numerous application in furniture making, securing and repairing furniture and cabinetry and has unbeatable price on the market.
by
  • Recommended
Used for diy Suncast storage unit to clear the front doors.
by
    The brackets worked perfectly for the project I used them on. They are very study as well.
    by
    • Verified Purchase
    by
    • Verified Purchase
    The sky is the limit!
    Get yourself a box of these and then go salvage some wood from whatever's nearby and not occupied. These "things" let you get real efficient with the design. If your neighbor has a privacy fence you can save wood and use that as a support for one side of your deck. Here are a few of the things I've built using these things for my customers to inspire you. Also, a good way to know if part of the deck will support a car or a pontoon boat is to estimate.
    by
      • Recommended
      1 found this review helpful
      Worked well for my 2x4x8 boards. durable....
      Worked well for my 2x4x8 boards. durable.
      by
      • Verified Purchase
      What can I say they are holding up the shelves...
      What can I say they are holding up the shelves I installed. So… they better not rust! Or I’m coming back to change my rating.
      by
      • Verified Purchase
      These braces worked perfectly to attach bookcases to the wall....
      These braces worked perfectly to attach bookcases to the wall. Stacked the bookcases, mounted the braces into studs and they don't move at all. No way a child could pull them over.
      by
      • Verified Purchase
      Finished the job!!!
      Installed new ciunter tops&cabinets, but did not k ine up/level off due to 90yr old uneven walls. Worked like a charm. Secured w/5/8in screws with lock washers to (level) the counter top to the new cabinets. Perfect fit, no issues. Be cautious, though. If you don't pre plan and measure accurately, your counters will be uneven. Make sure you have levels and assistance during entire install. Good luck
      by
      • Verified Purchase
      • Recommended
      Love them!
      We used these on our faux beams between our family room and dining room. We painted them black and hung them using 1" lags. They were just what I was looking for and really give the area an industrial feel. I know these bracets arent necessarily a decor item, but they really look great!
      by
      • Verified Purchase
      • Recommended
      I need strong corner supports for my craft loom. These...
      I need strong corner supports for my craft loom. These corner brace supports are perfect! I've used them on two looms and the loom frame didn't twist and held it's shape even under the tension of yarn craft projects. I will buy these braces for all my upcoming looms.
      by
        Purely decorative, not strong at all....do NOT bend!------------------------------------------- ---- This is an unbiased review that is unaffected by the fact that I received this product for free. As proof of impartiality, just click on my nickname and see the average of the ratings I have given over 300 reviews to date. ---- As stated above, do not bend these. If you do the paint will flake off. And they are VERY easily bent. They will not hold any significant load and are just decorative. The finish is black paint over a "hammered" stamped piece of steel. There are a full set of black painted screws included but they will also flake off the paint.
        by
        • Recommended
        These are good braces for giving extra support to short countertop over hangs or short shelves. ...
        These are good braces for giving extra support to short countertop over hangs or short shelves. These aren't designed to bear a ton of weight but they work well. We used these under some spots on our butcher block counter top where it has a short overhang and needed a little extra support. Super easy to install and it comes with all the screws you'll need
        by
        • Recommended
        I chose the Everbilt 6 in Black Hammered Corner Brace (4-Pack) to use outside on the picnic table...
        I chose the Everbilt 6 in Black Hammered Corner Brace (4-Pack) to use outside on the picnic table I am refinishing. I wanted to have a strong reinforcement to help hold everything together securely. I really like that these are rust resistant as I live by the ocean, and everything rusts very quickly here. Once installed, these did not budge. The material is very sturdy and very easy to install.
        by
        • Recommended
        We chose the Everbilt 1 in. Black Corner Brace (4-Pack) to use for a heavy shelf we wanted to be ...
        We chose the Everbilt 1 in. Black Corner Brace (4-Pack) to use for a heavy shelf we wanted to be hung in the living room. They are extremely easy to install and they are very sturdy. We went with a heavier wood shelf and had no problems getting it installed. We were able to put some heavier items on the shelf and the braces didn't budge at all. We have complete confidence that this will hold up for years to come.
        by
        • Recommended
        These are great braces. The are strong and give great extra strength. We’ve got these used as sup...
        These are great braces. The are strong and give great extra strength. We’ve got these used as supports underneath our butcher block island so they don’t sag or bow. These are excellent for this purpose and we will link use these at a friends house to support concrete countertops we installed there too. These are great subtle solutions that don’t draw attention
        by
        • Recommended
        These corner braces are perfect for any corner that is noticeable to others because they are simp...
        These corner braces are perfect for any corner that is noticeable to others because they are simply beautiful. They have the look of antique ironwork. The braces are strong and solid, so they can handle any corner that need reinforcing well. Screws come in the package of four braces. It takes very little time to attach a brace to any corner. We had to brace a corner of our home where a raccoon chewed through, and the brace worked like a charm.
        by
        • Recommended
        These black hammered 8 inch corner braces are ideal for hanging a number of different types of sh...
        These black hammered 8 inch corner braces are ideal for hanging a number of different types of shelving. The black hammered metal finish blend well with a variety of different decors. I'm just using a white laminate shelf board. The screws are countersunk to set flush with braces. There are six screws per brace. A four pack of braces. Quite substantial for a good size shelf.
        by
        • Recommended
        These braces are thick and tough! The weight is substantial and should really hold up well. If y...
        These braces are thick and tough! The weight is substantial and should really hold up well. If you are looking for sturdy braces, these are MORE than enough! The finish has no flaws so if you are worried about what these will look like installed where they will show, don't worry about it. I used these for our kitchen island and they worked like a dream. Installation was easy and the finished product looks awesome.
        by
        • Recommended
        If you are looking for sturdy braces, these are MORE than enough! The metal is thick, solid and s...
        If you are looking for sturdy braces, these are MORE than enough! The metal is thick, solid and strong. The finish has no flaws so if you are worried about what these will look like installed where they will show, don't worry about it. I used these for our kitchen island and they worked like a dream. Installation was easy and the finished product looks awesome.
        by
        • Recommended
        Showing 1-30 of 2,422 reviews

        Frequently Bought Together

        +
        +
        Price:
        $378

        Compare Similar Corner Braces

        current product
        1-1/2 in. Zinc-Plated Corner Brace (4-Pack)
        4 in. Zinc-Plated Corner Brace (2-Pack)2 in. Zinc-Plated Heavy-Duty Corner Brace (2-Pack)3 in. Zinc-Plated Heavy-Duty Corner Brace (2-Pack)
        BrandEverbiltEverbiltEverbiltEverbilt
        Name1-1/2 in. Zinc-Plated Corner Brace (4-Pack)4 in. Zinc-Plated Corner Brace (2-Pack)2 in. Zinc-Plated Heavy-Duty Corner Brace (2-Pack)3 in. Zinc-Plated Heavy-Duty Corner Brace (2-Pack)
        Price
        $317
        $417
        $527
        $597
        Ratings
        (2411)
        (2411)
        (191)
        (191)
        Product Depth (in.)0.06 in1 in0.06 in0.06 in
        Product Width (in.)0.5 in0.87 in0.62 in0.87 in
        Product Length (in.)1.5 in4 in2 in3 in
        Brace typeAngleAngleAngleAngle
        MaterialZincZincZincZinc
        Fasteners IncludedFasteners Not IncludedFasteners Not IncludedFasteners IncludedFasteners Included
        FeaturesNo Additional FeaturesNo Additional FeaturesNo Additional FeaturesNo Additional Features
        Connector FinishNoneNoneNoneNone
        View ProductView ProductView ProductView Product