Customer Reviews for Everbilt 22 in. Self-Closing Bottom Mount Drawer Slide Set 1-Pair (2 Pieces)

Mine didn’t even come with screws, description on product is very ambiguous and I thought that the slide socket for face frames was included but it’s not. Definitely returning the second one I bought.

I am very pleased with the look and quality of these pull-out cabinet drawers. Once installed, they work very smoothly and quietly. They are better than drawers I have previous built in my woodworking shop. That said, the installation can be a bit tricky if you haven't measured your cabinet accurately. I removed the clip-on frameless door hinges and Installed the top drawer after removing the top shelf so I could easily work on it. I installed 1" angle brackets at the back edge to stabilize it from tipping once back in the cabinet. I marked and pre-drilled all screw holes with a 1/16" drill bit or a small nail with the head clipped off. However, these drawers (attached to a shelf) are heavy to maneuverer back into the cabinet. Take your time... their worth it!

Easy to install just wish they came with a template of sorts

Built extendable shelf to make use of every inch under kitchen sink a d this worked perfectly.

These bottom mount drawer slides are perfect and very sturdy. Easy to install and the instructions are easy to understand.

I have used these slides convert the shelves in our lower kitchen cabinets from fixed to pull-out. The 22" slides are the correct size for our standard depth cabinets and I used 8 pairs of slides overall. The slides were easy to install and work smoothly even when there are some moderately heavy kitchen items on the shelves.

Easy to install and works great

Easy to work with, purchase the install brackets for the rear of the slide. I made the drawers out of plywood. Fun project wife loves them!

Excellent product. I use these on all of my high end Acrylic desks and love them. Easy to install, slide smoothly and last. I'm happy to have an affordable and reliable option to use on my quality products

Draw slides were easy to install.

Product is inexpensive, low profile, simple to install and works well. After assembly, the drawer rolls perfectly and seats itself nicely in its home position. I would like to see a few more mounting screws, but everything that was specified in the directions was included. I am using this item as the ball bearing slides and guides for a simple drawer used to organize kitchen utensils in a tiny house kitchen. I used the same product 15 years ago for a similar application and the item is still working like new without ever having had a problem.

Daughter had an old bathroom cabinet that had a false drawer. I turned it into a workbench for her shed. Using the Self-Closing Bottom Mount Drawer Slides I changed the false drawer into a useable drawer. Easy to install when following the instructions. it works great.

I needed a 23” drawer slider. So I bought 22” too short. 24” was too long. So I cut to fix. Drawer slides nice and easy now. This was for the kitchen silverware drawer which is about 20 to 25 pounds. Good product.

Even after pre drilling holes for the screws, I had two break (shear) and one strip out. plastic screws would be stronger. I would recommend that you go ahead and buy more screws while you are at the store.

I USE THESE DRAWER SLIDE MOUNT, THEY'RE EASY TO INSTALL, ONLY DOWN FALL IS COULD USE A TAD LONGER SCREWS TO GIVE A BETTER HOLD. FOR NOT BEING A CABINET MAKER I HAD NO PROBLEMS DRAWERS SLIDE SMOOTH IN & OUT NO ISSUES WHAT SO EVER. GREAT PRODUCT COMES IN DIFFERENT SIZES 12 -24

I purchased these slides for a second hand 5 drawer dresser (framed) that I bought to "rebuild". I have never installed drawer slides so, this was a learning process for me. I measure the drawers from the back of the drawer face to the back edge which measured 13.5" so, I bought the 14" slides with the face frame sockets. I did have to add a piece of 3/4" plywood 3" tall and as wide as the inside (sides) of the dresser carcass. I attached with pocket screws and used 18ga brads to secure to existing cross piece. This was for the face frame sockets. The bottom drawer I just added a 1-1/2" thick block to secure the back of the drawer slide instead of face frame sockets. Once I added the pieces of wood that was needed installing the drawer slides were pretty easy and simple. Like I said the dresser I have has a face frame. Choose the correct set of drawer slides for the left and right side of the dresser. Install the corresponding socket on the slide, attach the drawer slide 1/16" back from the outer edge and attach a screw to secure the drawer slide to the face frame. I used a piece of 1-1/2" think block as a gauge between the drawer slide and inside of carcass to assure consistent placement of the back of the slide. To make sure I have a level drawer slide I used a square at from the face frame and squared the drawer slide and attached one back screw into the slide socket and secured it. Once the drawer slides were square I added screws to secure the drawer slides through out the carcass. The drawer slides were a breeze. Chose the correct drawer member and place the front edge of the drawer member to the back of the drawer face and along the bottom edge of the drawer, screw the drawer slide into place. Insert drawer and test for functionality. After installing my first set of drawer slides, I had no issues with then functioning as they should. The slides were very smooths without catching. Now, I need to add felt or rubber pads to the face frame to dampen the closure. Soft close, No. Self closing? Not the way the bearing drawer slides self close but, if you notice the downward angle of the back of the cabinet member in is angled downward it will "self close" pull it self closed and stay closed. Over all the install was in my opinion easy. Over all the drawer slides do exactly what they are designed to do. They are inexpensive compared to full extension ball bearing side mount drawer slides.

Replaced all drawer slides, 5 sets. Replacement was easy and without any modifications.

Old one was 30 years old and the new one was exactly the same !!

As good as can be expected for cheaper drawer slides.

Perfect replacement for one set that broke!

Easy to install. Works well.

Product works well. Installation simple and slides very well.