Customer Reviews for JELD-WEN 36 in. x 80 in. 6-Panel Primed Fiberglass Prehung Right-Hand Inswing Front Door w/ Brickmould

The door jamb was not as wide as the door and needed to spread by screws into the framework through jamb to allow for operation. The bottom right corner did not close evenely into the weather strip allowing some minor airflow. Lastly, the recessed area or mortice for the strikeplate on the deadbolt was 1/2 to short 1/4 not wide enough, 1/8 not deep enough. Very disappointed in the door. Would not recommend or buy again.

Product showed up damaged and in need of repairs before installation

brick mold is sort of cheesy. corners not locked in. could have spent a couple cents extra to nail top to sides.

The door was super easy to install myself and it looks great

Exactly what was expected, prompt delivery.

The screws for the hinges into the door were put in sideways, the brick mold was crooked. The fiberglass inlays weren't routed smooth. I can't believe the factory let's a door leave with poor workmanship. Home Depot had 4 doors in stock and I had to pick the best of the worst because of being in a pinch. Spend the extra and stay away from Jeld Wen. At least Home Depot gave me a discount, but in the end, the extra work wasn't worth it.

Fair quality you get what you pay for This store was supposed to be same-day delivery turned out. It took three days to get here and that’s only because I kept on calling.

was not the door we wanted and returned for another one

I installed this door for a client. She chose the door, not me. The door wouldnt close properly because the hinge screws were installed on an angle. Since they were only 1" screws, I had to go back to the store and buy new longer screws and re-drill the pilot holes correctly and reinstall the hinges. This door should have never left the factory. Of course the way the doors are packaged from the factory, you cant see the defect until you have already installed it in the opening.

A-OK. However would be better to have a composite jamb than wood for a fiberglass door.

The door is bowed and will not close as tight as it should. I bought this door over a steel door becuase I thought long term it would be the better option but now I feel like I wasted money on buying a more expensive door.

Good for where we need it

It seems like a decent front door. It only been up about a week.

Had this installed about three weeks ago. Very solid, and I'm glad to hear that it has superior insulation qualities since our garage has been really cold with the prior door that was in place. We'll be painting it when the weather warms up. Good looking, too.

Wouldn't fit modular home

Jeld-wen quality control is a assembler now. Hinge off 3/16" door racked. A real pain to level up, and door to shut evenly, 3 rd door I bought in last few months. If it wasn't needed I would wait for quality stock to buy

Jamb mortises were not aligned with door

As an entry door, this would have been more useful if it had a 6" frame rather than a 4" frame. Still waiting for a handyman to install. Good price, though.

Disappointed is truly not a fiberglass door. It is a wooden door with fiberglass casing on the outside.

Rating provided by a verified purchaser