Customer Reviews for Kreg 90 Degree Right Angle Clamp

Clamp works amazingly well.

Doesn't provide the functionality I expected. Only works if you are doing face frames, if you are using it to do larger pieces, like for a cabinet, the only way to use this is in a manner that will make the pocket holes exposed. That's ok if you want to fill the holes.

They work really good

clamp came in handy when building a ladder for ready nook we built my niece.

The Kreg clamp works like a charm. It's an excellent product in every sense. It's strong and with the right in-your hand feel. Love it. Jim, Bronx, NY

Cant get it to stay in the pocket hole and clamp just slips off. Not sure how anyone gets it to hold long enough to run a screw.... Giant waste of money!

Great product when you need a helping hand. Works as it should. Fast shipping also from Home Depot.

I have several Kregg tool sets and this makes a great addition. The tool is well made and I see no problem with with this clamp serving me well for many years.

Holds pieces tight for glue-up and assembly. Utilizes pocket holes.

I ordered this from online. I received the clamp along with a number of other items. It looks like someone cut the soft material covering the grips or it was already torn. And no, I did not cut it when opening the box. I called and spoke with customer service, and was told I needed to bring it in. Considering the closest Home Depot is roughly 40 mins away, this isn't going to work. The whole reason I ordered online is so I didn't have to drive to our local Home Depot. I haven't opened the clamp yet, but I'm assuming at this point, it will perform its job. It's just frustrating to order a new tool and have it arrive in this condition. Heck, even the bosch jigsaw I ordered arrived all scratched up.

I highly recommend this clamp. I would recommend 2, actually. This is ideal for the initial 1-2 screws when you start to piece together your project, holding them in place so they don't move out of place. Keep in mind that the clamp is limited to being on the end of the pieces only. Well worth the price!

If you're using KREG jigs to make pocket holes then these clamps help out tremendously. They clamp into the pocket hole and underside and keep the loose board nice and flush and sturdywhile you fill the other holes with screws. Its like a third hand and i actually recommend getting two of these if you can. One at each end to keep it square the the edge while you screw the middle holes down. Love these things even if they are maybe slightly overpriced. Still worth it in my opinion, if you are using the KREG system to make any kind of cabinets or similar box-shaped stuff.

I used the Kreg jig and clamp for this "Boot Closet" project I made. The clamp helped me hold things together so I didn't need a extra pair of hands. I follow the Shanty 2 Chic sisters and Ana White on the internet and they use all the Kreg products.

Its great works well, does the job its designed for.

only mistake we made in this purchase was not buying enough of them!!! we will be back for more of these...love it !!!

A must have for the Kreg system. Worked well on 2x4s studs and 1x6 oak so far. Ensures a nice tight pocket joint and helps free up a hand.

I recently received the Kreg Jig as a gift but it did not come with this clamp. We do many projects that require the 90 degree connection. We attempted to perform these connections without this clamp and while we could, it was a little difficult and required more hands than preferred. With this clamp I can accurately make these connections with no other assistance which is very convenient.

I have used the Kreg pocket system for awhile, but never had the right angle clamp, which according to an ad makes it even easier. The ad was true. The clamp holds the boards together well and makes final assembly just that much easier.

This clamp makes the tough 90 degree clamping pretty easy. Only drawback is that is will only work on smaller pieces of lumber. Otherwise, very helpful piece of equipment and easy to use.

Best product I have used in a long time. I holds fantastic and at a perfect 90 degree angle. I do not know how I got along before this.

I used the Kreg pocket hole system a couple of times without this but had wished I had an extra hand. I did some research and found this awesome Kreg tool and it now acts as my extra needed hand. It clamps your joints tightly and keeps them lined up as you screw adjacent holes. This is great for face frame cabinets as well as cabinet carcass building.

This is a MUST tool to add to your Kreg assortment. Ideal for making tight joints with yoour Kreg Jig kit on items such as cabinetry face frames and top frames.

If you use the Kreg attachment system you need multiples of this clamp to get the job done quickly and easily!

I prefer to use C clamps, they hold better than the c-type vise grips but C clamps do take more time.

This tool is the perfect third hand for aligning your panels before screwing them together.